public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: "Cousson, Benoit" <b-cousson@ti.com>
To: "andy.green@linaro.org" <andy.green@linaro.org>
Cc: Andy Green <andy@warmcat.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"patches@linaro.org" <patches@linaro.org>,
	Ben Dooks <ben-linux@fluff.org>
Subject: Re: [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr
Date: Wed, 9 Mar 2011 16:43:27 +0100	[thread overview]
Message-ID: <4D77A01F.8080706@ti.com> (raw)
In-Reply-To: <4D7788D5.8040603@linaro.org>

On 3/9/2011 3:04 PM, Andy Green wrote:
> On 03/09/2011 01:49 PM, Somebody in the thread at some point said:
> 
> Hi -
> 
>> I have one minor comment about the OMAP4 dev_attr position in the
>> structure. The point here is just to be aligned with the template
>> used by the generator.
>>
>> Acked-by: Benoit Cousson<b-cousson@ti.com>
> 
>> The generator is adding a (probably useless...) comment on top of the
>> structure. For the comment I'd prefer to stick to the template. I'll
>> do a massive cleanup when every OMAP4 drivers will be migrated to
>> hwmod. And then OMAP2&   3 at some point will stick to that as well.
> 
>> The OMAP4 part should look like the patch below. I've just updated
>> the scripts to add the new data you introduced.
> 
> I'm fine if you just want to replace that stanza with yours that matches
> the script's member ordering.  Thanks for a rapid review ^^

You can find it below. I changed as well the subject as suggested.

Benoit

---
>From 561068054176af4574b5bf3a1d1258f19dc186e8 Mon Sep 17 00:00:00 2001
From: Andy Green <andy@warmcat.com>
Date: Tue, 8 Mar 2011 11:09:12 +0000
Subject: [PATCH] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr

This adds the new functionality flags for OMAP i2c unit to all OMAP2+
hwmod definitions.

Cc: patches@linaro.org
Cc: Ben Dooks <ben-linux@fluff.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[b-cousson@ti.com: Move dev_attr to stick to
hwmod template, update the subject]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    7 ++++++-
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    3 +++
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    9 +++++++++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   10 ++++++++++
 4 files changed, 28 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index de92d75..fe70365 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1450,7 +1450,12 @@ static struct omap_hwmod_class i2c_class = {
 	.rev		= OMAP_I2C_IP_VERSION_1,
 };
 
-static struct omap_i2c_dev_attr i2c_dev_attr;
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags		= OMAP_I2C_FLAG_NO_FIFO |
+			  OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			  OMAP_I2C_FLAG_16BIT_DATA_REG |
+			  OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
 
 /* I2C1 */
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index d737b99..a30b100 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1527,6 +1527,9 @@ static struct omap_hwmod_class i2c_class = {
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
+	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+			  OMAP_I2C_FLAG_BUS_SHIFT_2 |
+			  OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
 };
 
 /* I2C1 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 324162d..f804e78 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1876,6 +1876,9 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 
 static struct omap_i2c_dev_attr i2c1_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
+	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
 static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
@@ -1919,6 +1922,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 
 static struct omap_i2c_dev_attr i2c2_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
+	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
 static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
@@ -1962,6 +1968,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 
 static struct omap_i2c_dev_attr i2c3_dev_attr = {
 	.fifo_depth	= 64, /* bytes */
+	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
 static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 5d3f684..c2edb21 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -27,6 +27,7 @@
 #include <plat/mcspi.h>
 #include <plat/mcbsp.h>
 #include <plat/mmc.h>
+#include <plat/i2c.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -2090,6 +2091,11 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 	.rev	= OMAP_I2C_IP_VERSION_2,
 };
 
+/* i2c dev_attr */
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
 /* i2c1 */
 static struct omap_hwmod omap44xx_i2c1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
@@ -2138,6 +2144,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
 			.clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
 		},
 	},
+	.dev_attr	= &i2c_dev_attr,
 	.slaves		= omap44xx_i2c1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c1_slaves),
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2191,6 +2198,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
 			.clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
 		},
 	},
+	.dev_attr	= &i2c_dev_attr,
 	.slaves		= omap44xx_i2c2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c2_slaves),
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2244,6 +2252,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
 			.clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
 		},
 	},
+	.dev_attr	= &i2c_dev_attr,
 	.slaves		= omap44xx_i2c3_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c3_slaves),
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2297,6 +2306,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
 			.clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
 		},
 	},
+	.dev_attr	= &i2c_dev_attr,
 	.slaves		= omap44xx_i2c4_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c4_slaves),
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-- 
1.7.0.4






  reply	other threads:[~2011-03-09 15:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-08 11:07 [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Andy Green
2011-03-08 11:07 ` [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c Andy Green
2011-03-08 21:48   ` Cousson, Benoit
2011-03-08 23:14   ` Paul Walmsley
2011-03-08 11:07 ` [PATCH 2 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly Andy Green
2011-03-08 11:07 ` [PATCH 2 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants Andy Green
2011-03-08 11:07 ` [PATCH 2 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision Andy Green
2011-03-08 22:08   ` Cousson, Benoit
2011-03-08 11:07 ` [PATCH 2 05/18] I2C: OMAP: add rev to omap i2c platform data Andy Green
2011-03-08 11:08 ` [PATCH 2 06/18] I2C: OMAP1: set IP revision in " Andy Green
2011-03-08 11:08 ` [PATCH 2 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added Andy Green
2011-03-08 11:08 ` [PATCH 2 08/18] I2C: OMAP2+: use platform_data ip revision to select register map Andy Green
2011-03-08 11:08 ` [PATCH 2 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle Andy Green
2011-03-08 11:08 ` [PATCH 2 10/18] I2C: OMAP2+: address confused probed version naming Andy Green
2011-03-08 11:08 ` [PATCH 2 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32 Andy Green
2011-03-08 11:08 ` [PATCH 2 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data Andy Green
2011-03-08 11:08 ` [PATCH 2 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well Andy Green
2011-03-08 11:09 ` [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Andy Green
2011-03-09 14:33   ` Krishnamoorthy, Balaji T
     [not found]   ` <AANLkTi=KjWq9B9Bt90Th72=tXF2BfEv1p1Z-0=Sk1Z+t@mail.gmail.com>
2011-03-09 15:18     ` Andy Green
2011-03-09 15:56       ` Cousson, Benoit
2011-03-08 11:09 ` [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Andy Green
2011-03-09 13:49   ` Cousson, Benoit
2011-03-09 14:04     ` Andy Green
2011-03-09 15:43       ` Cousson, Benoit [this message]
2011-03-08 11:09 ` [PATCH 2 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data Andy Green
2011-03-08 11:09 ` [PATCH 2 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from " Andy Green
2011-03-08 11:09 ` [PATCH 2 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info Andy Green
2011-03-08 21:36 ` [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Cousson, Benoit
2011-03-08 23:38   ` Tony Lindgren
2011-03-09 14:02     ` Cousson, Benoit
2011-03-09 19:11       ` Tony Lindgren
2011-03-14 17:42         ` Tony Lindgren
2011-03-14 17:57           ` Andy Green

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D77A01F.8080706@ti.com \
    --to=b-cousson@ti.com \
    --cc=andy.green@linaro.org \
    --cc=andy@warmcat.com \
    --cc=ben-linux@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=patches@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox