From: Xiao Jiang <jgq516@gmail.com>
To: linux-omap@vger.kernel.org
Subject: Some issue about CA816x/819x EVM board
Date: Mon, 21 Mar 2011 12:45:28 +0800 [thread overview]
Message-ID: <4D86D7E8.6010801@gmail.com> (raw)
Hi,
I got one CA816x/819x EVM board, the board can be boot thru image which
is compiled from arago
git(http://arago-project.org/git/projects/?p=linux-omap3.git;a=summary,
and I used the tag 2.6.34_TI816XPSP_04.00.00.07),
I found some issues about the board, these issues are existed in both
arago image and the demo image.
1. SD/MMC card slot hot-plug issue
SD/MMC card slot can't support hot-plug, the SD card can only be
identify if it was pluged into slot before
system boot. After check the code of arago git, it seems the gpio part
wasn't enabled since I found the
gpio_bank_count is zero in arch/arm/plat-omap/gpio.c, I want to add gpio
bank support in the file, however
I can't find gpio base address in AM389x Sitara ARM Microprocessors
(MPUs) Technical Reference Manual.
2. SATA interface issue
SATA disk only works well if connect with SATA0/J12, the disk can't be
recognize if connect with SATA1/J11.
Does anyone has some hints for these? Thanks in advance!
Best Regards,
Xiao Jiang
reply other threads:[~2011-03-21 3:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D86D7E8.6010801@gmail.com \
--to=jgq516@gmail.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).