From: Rajendra Nayak <rnayak@ti.com>
To: Hema Kalliguddi <hemahk@ti.com>
Cc: linux-omap@vger.kernel.org, paul@pwsan.com,
Benoit Cousson <b-cousson@ti.com>
Subject: Re: [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod
Date: Tue, 22 Mar 2011 13:58:24 +0530 [thread overview]
Message-ID: <4D885DA8.80002@ti.com> (raw)
In-Reply-To: <03a02588593f269848ca723790e0319a@mail.gmail.com>
On 3/21/2011 6:38 PM, Hema Kalliguddi wrote:
> Rajendra,
>
>> -----Original Message-----
>> From: linux-omap-owner@vger.kernel.org
>> [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Rajendra Nayak
>> Sent: Monday, March 21, 2011 4:40 PM
>> To: linux-omap@vger.kernel.org
>> Cc: paul@pwsan.com; b-cousson@ti.com; Rajendra Nayak
>> Subject: [RFC 2/3] OMAP3: hwmod: Add support to associate an
>> initiator with a hwmod
>>
>> Add hwmod api's to add and delete an initiator
>> association with an hwmod.
>>
>> Signed-off-by: Rajendra Nayak<rnayak@ti.com>
>> ---
>> arch/arm/mach-omap2/omap_hwmod.c | 33
>> ++++++++++++++++++++++++++
>> arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +
>> 2 files changed, 35 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c
>> b/arch/arm/mach-omap2/omap_hwmod.c
>> index e034294..d4826be 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>> @@ -2369,3 +2369,36 @@ int omap_hwmod_no_setup_reset(struct
>> omap_hwmod *oh)
>>
>> return 0;
>> }
>> +
>> +int omap_hwmod_add_initiator_user(struct omap_hwmod *oh, u8 init_id)
>> +{
>> + if (oh->_state != _HWMOD_STATE_ENABLED)
>> + return -EINVAL;
>> +
>> + if (cpu_is_omap34xx()) {
>> + return omap2_prm_module_enable_initiator_wakeup(
>> +
>> oh->prcm.omap2.module_offs,
>> +
>> oh->prcm.omap2.idlest_reg_id,
>> +
>> oh->prcm.omap2.idlest_idle_bit,
>> + init_id);
>> + }
>> +
>> + return -EINVAL;
>
> Why are you returning error when it not a omap34xx?
> Is it not that this API will be called for only omap34xx?
No, this API could get called as part of a driver call
to the omap_device API on non-supported platform's as well.
>
>> +}
>> +
>> +int omap_hwmod_del_initiator_user(struct omap_hwmod *oh, u8 init_id)
>> +{
>> + if (oh->_state == _HWMOD_STATE_ENABLED)
>> + return -EINVAL;
>> +
>> + if (cpu_is_omap34xx()) {
>> + return omap2_prm_module_disable_initiator_wakeup(
>> +
>> oh->prcm.omap2.module_offs,
>> +
>> oh->prcm.omap2.idlest_reg_id,
>> +
>> oh->prcm.omap2.idlest_idle_bit,
>> + init_id);
>> + }
>> +
>> + return -EINVAL;
>
> Ditto...
>
>> +
>> +}
>> diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h
>> b/arch/arm/plat-omap/include/plat/omap_hwmod.h
>> index 4bd7354..fe47448 100644
>> --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
>> +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
>> @@ -590,6 +590,8 @@ int omap_hwmod_add_initiator_dep(struct
>> omap_hwmod *oh,
>> struct omap_hwmod *init_oh);
>> int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
>> struct omap_hwmod *init_oh);
>> +int omap_hwmod_add_initiator_user(struct omap_hwmod *oh, u8 init_id);
>> +int omap_hwmod_del_initiator_user(struct omap_hwmod *oh, u8 init_id);
>>
>> int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
>> int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
>> --
>
>
> Regards,
> Hema
>
>> 1.7.0.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
next prev parent reply other threads:[~2011-03-22 8:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 11:10 [RFC 0/3] OMAP3: Support processor group selection by a peripheral Rajendra Nayak
2011-03-21 11:10 ` [RFC 1/3] OMAP3: PRM: Add grpsel programming support Rajendra Nayak
2011-03-21 11:10 ` [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod Rajendra Nayak
2011-03-21 11:10 ` [RFC 3/3] OMAP3: omap_device: Add support to associate a device with an initiator Rajendra Nayak
2011-03-21 13:12 ` Hema Kalliguddi
2011-03-22 8:28 ` Rajendra Nayak
2011-03-21 13:08 ` [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod Hema Kalliguddi
2011-03-22 8:28 ` Rajendra Nayak [this message]
2011-03-22 8:31 ` Hema Kalliguddi
2011-03-21 13:08 ` [RFC 1/3] OMAP3: PRM: Add grpsel programming support Hema Kalliguddi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D885DA8.80002@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=hemahk@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).