Re: [PATCH 1/5] OMAP3: l3: fix for "irq 10: nobody cared" message

[Santosh Shilimkar <santosh.shilimkar@ti.com>]

On 3/29/2011 10:50 PM, Omar Ramirez Luna wrote:
> If an error occurs in the L3 on any other initiator than MPU,
> the interrupt goes unhandled given that the 'base' register
> was calculated with the initialized err_source value (which
> coincidentally points to MPU) and not with the actual source
> of the error.
>
> Removed parenthesis that are not needed for the touched lines.
>
> Signed-off-by: Omar Ramirez Luna<omar.ramirez@ti.com>
> ---

Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

>   arch/arm/mach-omap2/omap_l3_smx.c |    4 ++--
>   1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
> index 5f2da75..4321e79 100644
> --- a/arch/arm/mach-omap2/omap_l3_smx.c
> +++ b/arch/arm/mach-omap2/omap_l3_smx.c
> @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
>   		/* No timeout error for debug sources */
>   	}
>
> -	base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
> -
>   	/* identify the error source */
>   	for (err_source = 0; !(status&  (1<<  err_source)); err_source++)
>   									;
> +
> +	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
>   	error = omap3_l3_readll(base, L3_ERROR_LOG);
>
>   	if (error) {