* [PATCH] OMAP: DSS2: DSI: enable interface for omap4
@ 2011-04-21 3:31 Vikram Pandita
2011-04-21 9:17 ` Archit Taneja
2011-04-26 7:18 ` Tomi Valkeinen
0 siblings, 2 replies; 3+ messages in thread
From: Vikram Pandita @ 2011-04-21 3:31 UTC (permalink / raw)
To: linux-omap; +Cc: Vikram Pandita, Archit Taneja, Tomi Valkeinen
From: Vikram Pandita <vikram.pandita@ti.com>
By default, the DSI is not getting enabled for omap4.
OMAP2PLUS does not catch this issue since it has ARCH_OMAP3.
The issue is only seen when using defconfig with ARCH_OMAP4 only.
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Archit Taneja <archit@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 7a49a75..6b3e2da 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -80,7 +80,7 @@ config OMAP2_DSS_SDI
config OMAP2_DSS_DSI
bool "DSI support"
- depends on ARCH_OMAP3
+ depends on ARCH_OMAP3 || ARCH_OMAP4
default n
help
MIPI DSI (Display Serial Interface) support.
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] OMAP: DSS2: DSI: enable interface for omap4
2011-04-21 3:31 [PATCH] OMAP: DSS2: DSI: enable interface for omap4 Vikram Pandita
@ 2011-04-21 9:17 ` Archit Taneja
2011-04-26 7:18 ` Tomi Valkeinen
1 sibling, 0 replies; 3+ messages in thread
From: Archit Taneja @ 2011-04-21 9:17 UTC (permalink / raw)
To: Pandita, Vikram; +Cc: linux-omap@vger.kernel.org, Valkeinen, Tomi
Hi,
On Thursday 21 April 2011 09:01 AM, Pandita, Vikram wrote:
> From: Vikram Pandita<vikram.pandita@ti.com>
>
> By default, the DSI is not getting enabled for omap4.
> OMAP2PLUS does not catch this issue since it has ARCH_OMAP3.
>
> The issue is only seen when using defconfig with ARCH_OMAP4 only.
>
This looks fine. There isn't a defconfig in mainline kernel with only
ARCH_OMAP4, hence we missed this out.
Archit
> Signed-off-by: Vikram Pandita<vikram.pandita@ti.com>
> Cc: Archit Taneja<archit@ti.com>
> Cc: Tomi Valkeinen<tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
> index 7a49a75..6b3e2da 100644
> --- a/drivers/video/omap2/dss/Kconfig
> +++ b/drivers/video/omap2/dss/Kconfig
> @@ -80,7 +80,7 @@ config OMAP2_DSS_SDI
>
> config OMAP2_DSS_DSI
> bool "DSI support"
> - depends on ARCH_OMAP3
> + depends on ARCH_OMAP3 || ARCH_OMAP4
> default n
> help
> MIPI DSI (Display Serial Interface) support.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] OMAP: DSS2: DSI: enable interface for omap4
2011-04-21 3:31 [PATCH] OMAP: DSS2: DSI: enable interface for omap4 Vikram Pandita
2011-04-21 9:17 ` Archit Taneja
@ 2011-04-26 7:18 ` Tomi Valkeinen
1 sibling, 0 replies; 3+ messages in thread
From: Tomi Valkeinen @ 2011-04-26 7:18 UTC (permalink / raw)
To: Vikram Pandita; +Cc: linux-omap, Archit Taneja
On Wed, 2011-04-20 at 20:31 -0700, Vikram Pandita wrote:
> From: Vikram Pandita <vikram.pandita@ti.com>
>
> By default, the DSI is not getting enabled for omap4.
> OMAP2PLUS does not catch this issue since it has ARCH_OMAP3.
>
> The issue is only seen when using defconfig with ARCH_OMAP4 only.
>
> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
> Cc: Archit Taneja <archit@ti.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Thanks, applied.
Tomi
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-04-26 7:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-21 3:31 [PATCH] OMAP: DSS2: DSI: enable interface for omap4 Vikram Pandita
2011-04-21 9:17 ` Archit Taneja
2011-04-26 7:18 ` Tomi Valkeinen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox