From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajendra Nayak Subject: Re: [PATCH 0/7] OMAP4: Add 4460 base support Date: Fri, 01 Jul 2011 10:00:06 -0700 Message-ID: <4E0DFD16.40407@ti.com> References: <1309486081-8257-1-git-send-email-rnayak@ti.com> <87boxe2c1q.fsf@ti.com> <1309538407.6231.84.camel@vence> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from na3sys009aog121.obsmtp.com ([74.125.149.145]:34651 "EHLO na3sys009aog121.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754965Ab1GARAK (ORCPT ); Fri, 1 Jul 2011 13:00:10 -0400 Received: by mail-gx0-f172.google.com with SMTP id 19so2199528gxk.17 for ; Fri, 01 Jul 2011 10:00:09 -0700 (PDT) In-Reply-To: <1309538407.6231.84.camel@vence> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Kevin Hilman Cc: linux-omap@vger.kernel.org, paul@pwsan.com, b-cousson@ti.com On 7/1/2011 9:40 AM, Kevin Hilman wrote: > On Fri, 2011-07-01 at 09:36 -0700, Kevin Hilman wrote: >> Rajendra Nayak writes: >> >>> This series adds base support needed to be able >>> to boot on a OMAP4460 device. >>> Patches are based on Benoit's for_3.0.1/7_hwmod_modulemode >>> branch and boot tested on both 4460sdp as well as 4430sdp. >> >> Can you also briefly summarize the dependencies between this series an >> Benoit's? I'm assuming it is mainly because of the s/4430/44XX/ >> changes, and also avoiding conflicts in clockdomain and powerdomain data >> files. >> >> With that, you can add >> >> Reviewed-by: Kevin Hilman >> >> for the whole series. > > oops, except for [7/7], where I agree with Tony. > > As discussed off-list, lets just drop this patch all together and state > in [0/7] that there is a limitation that until we fix the hwmod fwk to > do lazy disable as Tony suggested, 4460 can only reliably boot at OPP50. Sure, I'll re-post the series once I have Benoit's updated one's to base on. Thanks Kevin. > > Kevin > >