From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yegor Yefremov Subject: [PATCH] TPS6507X: define MFD dependencies for touch and regulator unit Date: Mon, 11 Jul 2011 10:59:10 +0200 Message-ID: <4E1ABB5E.8070406@visionsystems.de> Reply-To: yegor_sub1@visionsystems.de Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Return-path: Received: from ns.vscom.de ([62.145.30.242]:60784 "EHLO mail.visionsystems.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1749667Ab1GKI7T (ORCPT ); Mon, 11 Jul 2011 04:59:19 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "linux-omap@vger.kernel.org" Cc: Tony Lindgren both touchscreen and regulator units are only working if mfd device is activated. So if mfd support is enabled, select TPS6507X mfd support automatically. Signed-off-by: Yegor Yefremov --- drivers/input/touchscreen/Kconfig | 3 ++- drivers/regulator/Kconfig | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) Index: b/drivers/input/touchscreen/Kconfig =================================================================== --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -716,7 +716,8 @@ config TOUCHSCREEN_TPS6507X tristate "TPS6507x based touchscreens" - depends on I2C + depends on I2C && MFD_SUPPORT + select TPS6507X help Say Y here if you have a TPS6507x based touchscreen controller. Index: b/drivers/regulator/Kconfig =================================================================== --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -242,7 +242,8 @@ config REGULATOR_TPS6507X tristate "TI TPS6507X Power regulators" - depends on I2C + depends on I2C && MFD_SUPPORT + select TPS6507X help This driver supports TPS6507X voltage regulator chips. TPS6507X provides three step-down converters and two general-purpose LDO voltage regulators.