public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Cc: "paul@pwsan.com" <paul@pwsan.com>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"Cousson, Benoit" <b-cousson@ti.com>
Subject: Re: [PATCHv2 0/5] OMAP DSS HWMOD fixes
Date: Mon, 8 Aug 2011 17:13:24 +0530	[thread overview]
Message-ID: <4E3FCBDC.1080208@ti.com> (raw)
In-Reply-To: <1312794914-22894-1-git-send-email-tomi.valkeinen@ti.com>

Hi,

On Monday 08 August 2011 02:45 PM, Valkeinen, Tomi wrote:
> Second try with the DSS HWMODs
>
> This set fixes the DSS clocks in HWMOD data, and implements a new reset
> mechanism for dss_core.
>
> The new dss_reset function doesn't actually do a reset, it just enables all DSS
> clocks and waits for the reset to complete. This should be better approach than
> actually doing a reset, because:
>
> OMAP4 - dss_core HW doesn't contain a SW reset bit so doing a reset is
> impossible. But after power-on we need to enable all DSS clocks and wait for
> the power-on reset to complete.
>
> OMAP2/3 - dss_core does have a SW reset bit, but resetting dss_core also resets
> all the other DSS modules. This means that the other modules could be left
> uninitialized, as the hwmod code handles all modules independently, and in this
> case initializes only dss_core's registers. Thus dss_core's reset shouldn't be
> used, and we should only verify that the power-on reset has completed.

If the bootloader enables DSS, we need to do a reset so that DSS2 driver 
can start with DSS HW in a clean state. With this patch set, how do we 
take care of such a scenario?

Archit

>
> Tested on OMAP4 and OMAP3.
>
> The first two HWMOD patches (for OMAP2/3) are not changed since v1.
>
>   Tomi
>
> Tomi Valkeinen (5):
>    OMAP2xxx: HWMOD: fix DSS opt clocks
>    OMAP3: HWMOD: fix DSS opt clocks
>    OMAP4: HWMOD: fix DSS opt clocks
>    OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss
>    OMAP: HWMOD: Unify DSS resets for all OMAPs
>
>   arch/arm/mach-omap2/common-board-devices.h         |    4 ++
>   arch/arm/mach-omap2/display.c                      |   35 ++++++++++++++++++++
>   arch/arm/mach-omap2/omap_hwmod_2420_data.c         |   15 +++++++-
>   arch/arm/mach-omap2/omap_hwmod_2430_data.c         |   15 +++++++-
>   .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c |    5 ++-
>   arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |   35 +++++++++++++++++--
>   arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |   18 +++-------
>   7 files changed, 106 insertions(+), 21 deletions(-)
>


  parent reply	other threads:[~2011-08-08 11:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-08  9:15 [PATCHv2 0/5] OMAP DSS HWMOD fixes Tomi Valkeinen
2011-08-08  9:15 ` [PATCHv2 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks Tomi Valkeinen
2011-08-08  9:15 ` [PATCHv2 2/5] OMAP3: " Tomi Valkeinen
2011-08-08  9:15 ` [PATCHv2 3/5] OMAP4: " Tomi Valkeinen
2011-08-09 16:17   ` Cousson, Benoit
2011-08-08  9:15 ` [PATCHv2 4/5] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss Tomi Valkeinen
2011-08-08  9:15 ` [PATCHv2 5/5] OMAP: HWMOD: Unify DSS resets for all OMAPs Tomi Valkeinen
2011-08-20  5:30   ` Paul Walmsley
2011-08-20  6:26     ` Paul Walmsley
2011-08-22  7:00       ` Tomi Valkeinen
2011-08-22 19:10         ` Paul Walmsley
2011-08-08 11:43 ` Archit Taneja [this message]
2011-08-08 12:03   ` [PATCHv2 0/5] OMAP DSS HWMOD fixes Tomi Valkeinen
2011-08-08 12:21     ` Archit Taneja
2011-08-08 12:23       ` Tomi Valkeinen
2011-08-18  7:21 ` Tomi Valkeinen
2011-08-21  6:03   ` Paul Walmsley
2011-08-22  6:35     ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E3FCBDC.1080208@ti.com \
    --to=archit@ti.com \
    --cc=b-cousson@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox