From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Wagner Subject: Re: [PATCH 1/2] Macro for getting the BASEADDRESS field in omap's gpmc configuration Date: Thu, 11 Aug 2011 17:00:23 +0200 Message-ID: <4E43EE87.8050900@free-electrons.com> References: <1312470395-19672-1-git-send-email-david.wagner@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from mail.free-electrons.com ([88.190.12.23]:53379 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751067Ab1HKO5a (ORCPT ); Thu, 11 Aug 2011 10:57:30 -0400 In-Reply-To: <1312470395-19672-1-git-send-email-david.wagner@free-electrons.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: David Wagner Cc: Tony Lindgren , linux-omap , Russell King Hi, On 08/04/2011 05:06 PM, David Wagner wrote: > BASEADDRESS is located in the 6 lower bits of the CONFIG7 register. > See OMAP 35x Technical Reference Manual, p. 1169. > > Signed-off-by: David Wagner I'm not subscribed to the linux-omap mailing list but I saw no answer on this patch and the next one in the archive. The second one (replaces bitwise operations in board-igep0020.c with GPMC macros) partly depends on the first one, but can be split so that part of it can be standalone. Should I do so and resubmit or is it ok like this ? Regards, David. -- David Wagner, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com