Re: [PATCH 11/15] OMAP3: powerdomain data: add wake-up latency figures

[Santosh <santosh.shilimkar@ti.com>]

On Tuesday 16 August 2011 07:13 PM, jean.pihet@newoldbits.com wrote:
> From: Jean Pihet<j-pihet@ti.com>
>
> Figures are added to the power domains structs.
>
> Note: the figures are preliminary figures. More accurate measurements
> are needed. Also the conditions of measurements shall be investigated
> and described.
>
> Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
> on MPU, CORE and PER.
>
> Signed-off-by: Jean Pihet<j-pihet@ti.com>
> ---
>   arch/arm/mach-omap2/powerdomains3xxx_data.c |   77 +++++++++++++++++++++++++++
>   1 files changed, 77 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> index 469a920..64446e7 100644
> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> @@ -31,6 +31,13 @@
>
>   /*
>    * Powerdomains
> + *
> + * The wakeup_lat values are derived from measurements on
> + * the actual target.
> + *
> + * Note: the latency figures are preliminary and only used
> + * for the constraints framework validation.
> + * Actual figures and measurements conditions shall be added.
>    */
>
>   static struct powerdomain iva2_pwrdm = {
> @@ -52,6 +59,13 @@ static struct powerdomain iva2_pwrdm = {
>   		[2] = PWRSTS_OFF_ON,
>   		[3] = PWRSTS_ON,
>   	},
> +	.wakeup_lat = {
> +		[PWRDM_FUNC_PWRST_OFF] = 1100,
> +		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
> +		[PWRDM_FUNC_PWRST_CSWR] = 350,
> +		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
This can easily derived from the PWRST flag instead of hardcoding
it this way. Also note that INACTIVE PD isn't supported in mainline
yet because of voltage-domain dependency planned changes.

> +		[PWRDM_FUNC_PWRST_ON] = 0,

All of the PD structures are manually coded. This whole file is
auto-generated and even these field generation needs to follow
that path.