Re: [PATCH 11/15] OMAP3: powerdomain data: add wake-up latency figures

[Santosh <santosh.shilimkar@ti.com>]

On Tuesday 16 August 2011 08:04 PM, Jean Pihet wrote:
> On Tue, Aug 16, 2011 at 4:25 PM, Santosh<santosh.shilimkar@ti.com>  wrote:
>> On Tuesday 16 August 2011 07:13 PM, jean.pihet@newoldbits.com wrote:
>>>
>>> From: Jean Pihet<j-pihet@ti.com>
>>>
>>> Figures are added to the power domains structs.
>>>
>>> Note: the figures are preliminary figures. More accurate measurements
>>> are needed. Also the conditions of measurements shall be investigated
>>> and described.
>>>
>>> Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
>>> on MPU, CORE and PER.
>>>
>>> Signed-off-by: Jean Pihet<j-pihet@ti.com>
>>> ---
>>>   arch/arm/mach-omap2/powerdomains3xxx_data.c |   77
>>> +++++++++++++++++++++++++++
>>>   1 files changed, 77 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c
>>> b/arch/arm/mach-omap2/powerdomains3xxx_data.c
>>> index 469a920..64446e7 100644
>>> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
>>> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
>>> @@ -31,6 +31,13 @@
>>>
>>>   /*
>>>    * Powerdomains
>>> + *
>>> + * The wakeup_lat values are derived from measurements on
>>> + * the actual target.
>>> + *
>>> + * Note: the latency figures are preliminary and only used
>>> + * for the constraints framework validation.
>>> + * Actual figures and measurements conditions shall be added.
>>>    */
>>>
>>>   static struct powerdomain iva2_pwrdm = {
>>> @@ -52,6 +59,13 @@ static struct powerdomain iva2_pwrdm = {
>>>                 [2] = PWRSTS_OFF_ON,
>>>                 [3] = PWRSTS_ON,
>>>         },
>>> +       .wakeup_lat = {
>>> +               [PWRDM_FUNC_PWRST_OFF] = 1100,
>>> +               [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
>>> +               [PWRDM_FUNC_PWRST_CSWR] = 350,
>>> +               [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
>>
>> This can easily derived from the PWRST flag instead of hardcoding
>> it this way. Also note that INACTIVE PD isn't supported in mainline
>> yet because of voltage-domain dependency planned changes.
>>
>>> +               [PWRDM_FUNC_PWRST_ON] = 0,
>>
>> All of the PD structures are manually coded. This whole file is
>> auto-generated and even these field generation needs to follow
>> that path.
> Ok I need to check that. Any pointer on how to generate those?
>
The scripts needs to be updated to generate this additional information.
Will send you some pointer off the list.

Regards
Santosh