From: Archit Taneja <archit@ti.com>
To: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
Hunyue Yau <hyau@mvista.com>
Subject: Re: [PATCHv2 2/4] OMAP: 2420SDP: Port the display driver to new DSS2
Date: Mon, 12 Sep 2011 17:18:00 +0530 [thread overview]
Message-ID: <4E6DF170.20303@ti.com> (raw)
In-Reply-To: <1315826494-27993-3-git-send-email-tomi.valkeinen@ti.com>
On Monday 12 September 2011 04:51 PM, Valkeinen, Tomi wrote:
> Port the old omapfb panel driver for 2420SDP to DSS2.
Minor comment: The subject and commit message say 2420SDP, but patch
says 2430SDP.
I'll try to find the name of the panel.
Archit
>
> Cc: Hunyue Yau<hyau@mvista.com>
> Signed-off-by: Tomi Valkeinen<tomi.valkeinen@ti.com>
> ---
> drivers/video/omap/Makefile | 2 -
> drivers/video/omap/lcd_2430sdp.c | 203 ----------------------
> drivers/video/omap2/displays/panel-generic-dpi.c | 21 +++
> 3 files changed, 21 insertions(+), 205 deletions(-)
> delete mode 100644 drivers/video/omap/lcd_2430sdp.c
>
> diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
> index 37c03c2..43eb64a 100644
> --- a/drivers/video/omap/Makefile
> +++ b/drivers/video/omap/Makefile
> @@ -27,8 +27,6 @@ objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
> objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
>
> objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
> -objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
> -objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
> objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
> objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
>
> diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
> deleted file mode 100644
> index e3eccc9..0000000
> --- a/drivers/video/omap/lcd_2430sdp.c
> +++ /dev/null
> @@ -1,203 +0,0 @@
> -/*
> - * LCD panel support for the TI 2430SDP board
> - *
> - * Copyright (C) 2007 MontaVista
> - * Author: Hunyue Yau<hyau@mvista.com>
> - *
> - * Derived from drivers/video/omap/lcd-apollon.c
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License as published by the
> - * Free Software Foundation; either version 2 of the License, or (at your
> - * option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> - * General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License along
> - * with this program; if not, write to the Free Software Foundation, Inc.,
> - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> - */
> -
> -#include<linux/module.h>
> -#include<linux/platform_device.h>
> -#include<linux/delay.h>
> -#include<linux/gpio.h>
> -#include<linux/i2c/twl.h>
> -
> -#include<plat/mux.h>
> -#include<asm/mach-types.h>
> -
> -#include "omapfb.h"
> -
> -#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
> -#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
> -#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
> -#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
> -
> -static unsigned backlight_gpio;
> -static unsigned enable_gpio;
> -
> -#define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */
> -#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
> -#define ENABLE_VAUX2_DEDICATED 0x09
> -#define ENABLE_VAUX2_DEV_GRP 0x20
> -#define ENABLE_VAUX3_DEDICATED 0x03
> -#define ENABLE_VAUX3_DEV_GRP 0x20
> -
> -#define ENABLE_VPLL2_DEDICATED 0x05
> -#define ENABLE_VPLL2_DEV_GRP 0xE0
> -#define TWL4030_VPLL2_DEV_GRP 0x33
> -#define TWL4030_VPLL2_DEDICATED 0x36
> -
> -#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
> -
> -
> -static int sdp2430_panel_init(struct lcd_panel *panel,
> - struct omapfb_device *fbdev)
> -{
> - if (machine_is_omap_3430sdp()) {
> - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
> - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
> - } else {
> - enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
> - backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
> - }
> -
> - gpio_request(enable_gpio, "LCD enable"); /* LCD panel */
> - gpio_request(backlight_gpio, "LCD bl"); /* LCD backlight */
> - gpio_direction_output(enable_gpio, 0);
> - gpio_direction_output(backlight_gpio, 0);
> -
> - return 0;
> -}
> -
> -static void sdp2430_panel_cleanup(struct lcd_panel *panel)
> -{
> - gpio_free(backlight_gpio);
> - gpio_free(enable_gpio);
> -}
> -
> -static int sdp2430_panel_enable(struct lcd_panel *panel)
> -{
> - u8 ded_val, ded_reg;
> - u8 grp_val, grp_reg;
> -
> - if (machine_is_omap_3430sdp()) {
> - ded_reg = TWL4030_VAUX3_DEDICATED;
> - ded_val = ENABLE_VAUX3_DEDICATED;
> - grp_reg = TWL4030_VAUX3_DEV_GRP;
> - grp_val = ENABLE_VAUX3_DEV_GRP;
> -
> - if (omap_rev()> OMAP3430_REV_ES1_0) {
> - t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
> - TWL4030_VPLL2_DEDICATED);
> - t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
> - TWL4030_VPLL2_DEV_GRP);
> - }
> - } else {
> - ded_reg = TWL4030_VAUX2_DEDICATED;
> - ded_val = ENABLE_VAUX2_DEDICATED;
> - grp_reg = TWL4030_VAUX2_DEV_GRP;
> - grp_val = ENABLE_VAUX2_DEV_GRP;
> - }
> -
> - gpio_set_value(enable_gpio, 1);
> - gpio_set_value(backlight_gpio, 1);
> -
> - if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
> - return -EIO;
> - if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
> - return -EIO;
> -
> - return 0;
> -}
> -
> -static void sdp2430_panel_disable(struct lcd_panel *panel)
> -{
> - gpio_set_value(enable_gpio, 0);
> - gpio_set_value(backlight_gpio, 0);
> - if (omap_rev()> OMAP3430_REV_ES1_0) {
> - t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
> - t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
> - msleep(4);
> - }
> -}
> -
> -static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
> -{
> - return 0;
> -}
> -
> -struct lcd_panel sdp2430_panel = {
> - .name = "sdp2430",
> - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
> - OMAP_LCDC_INV_HSYNC,
> -
> - .bpp = 16,
> - .data_lines = 16,
> - .x_res = 240,
> - .y_res = 320,
> - .hsw = 3, /* hsync_len (4) - 1 */
> - .hfp = 3, /* right_margin (4) - 1 */
> - .hbp = 39, /* left_margin (40) - 1 */
> - .vsw = 1, /* vsync_len (2) - 1 */
> - .vfp = 2, /* lower_margin */
> - .vbp = 7, /* upper_margin (8) - 1 */
> -
> - .pixel_clock = LCD_PIXCLOCK_MAX,
> -
> - .init = sdp2430_panel_init,
> - .cleanup = sdp2430_panel_cleanup,
> - .enable = sdp2430_panel_enable,
> - .disable = sdp2430_panel_disable,
> - .get_caps = sdp2430_panel_get_caps,
> -};
> -
> -static int sdp2430_panel_probe(struct platform_device *pdev)
> -{
> - omapfb_register_panel(&sdp2430_panel);
> - return 0;
> -}
> -
> -static int sdp2430_panel_remove(struct platform_device *pdev)
> -{
> - return 0;
> -}
> -
> -static int sdp2430_panel_suspend(struct platform_device *pdev,
> - pm_message_t mesg)
> -{
> - return 0;
> -}
> -
> -static int sdp2430_panel_resume(struct platform_device *pdev)
> -{
> - return 0;
> -}
> -
> -struct platform_driver sdp2430_panel_driver = {
> - .probe = sdp2430_panel_probe,
> - .remove = sdp2430_panel_remove,
> - .suspend = sdp2430_panel_suspend,
> - .resume = sdp2430_panel_resume,
> - .driver = {
> - .name = "sdp2430_lcd",
> - .owner = THIS_MODULE,
> - },
> -};
> -
> -static int __init sdp2430_panel_drv_init(void)
> -{
> - return platform_driver_register(&sdp2430_panel_driver);
> -}
> -
> -static void __exit sdp2430_panel_drv_exit(void)
> -{
> - platform_driver_unregister(&sdp2430_panel_driver);
> -}
> -
> -module_init(sdp2430_panel_drv_init);
> -module_exit(sdp2430_panel_drv_exit);
> diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
> index b401304..0a4d340 100644
> --- a/drivers/video/omap2/displays/panel-generic-dpi.c
> +++ b/drivers/video/omap2/displays/panel-generic-dpi.c
> @@ -257,6 +257,27 @@ static struct panel_config generic_dpi_panels[] = {
> .power_off_delay = 0,
> .name = "innolux_at070tn83",
> },
> +
> + /* Unknown panel used in OMAP 2430 SDP */
> + {
> + {
> + .x_res = 240,
> + .y_res = 320,
> +
> + .pixel_clock = 5400,
> +
> + .hsw = 3,
> + .hfp = 3,
> + .hbp = 39,
> +
> + .vsw = 1,
> + .vfp = 2,
> + .vbp = 7,
> + },
> + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + OMAP_DSS_LCD_IHS,
> + .name = "2430sdp",
> + },
> };
>
> struct panel_drv_data {
next prev parent reply other threads:[~2011-09-12 11:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 11:21 [PATCHv2 0/4] OMAP: DSS: porting old drivers to DSS2 (driver part) Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 1/4] OMAP: OMAPFB: Remove unused lcd drivers Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 2/4] OMAP: 2420SDP: Port the display driver to new DSS2 Tomi Valkeinen
2011-09-12 11:48 ` Archit Taneja [this message]
2011-09-12 11:57 ` Tomi Valkeinen
2011-09-12 12:15 ` Archit Taneja
2011-09-12 12:19 ` Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 3/4] OMAP: H4: " Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 4/4] OMAP: Apollon: " Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E6DF170.20303@ti.com \
--to=archit@ti.com \
--cc=hyau@mvista.com \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox