From mboxrd@z Thu Jan 1 00:00:00 1970 From: Santosh Shilimkar Subject: Re: [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it Date: Mon, 03 Oct 2011 10:49:10 +0530 Message-ID: <4E8945CE.6070800@ti.com> References: <1317566760-25681-1-git-send-email-arnd@arndb.de> <1317566760-25681-24-git-send-email-arnd@arndb.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1317566760-25681-24-git-send-email-arnd@arndb.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Arnd Bergmann Cc: Tony Lindgren , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-omap@vger.kernel.org On Sunday 02 October 2011 08:15 PM, Arnd Bergmann wrote: > These three boards unconditionally use the twl4030 driver > from the board-zoom-display.c file. Make sure that the driver > is always there. > We also need to select the I2C core so we are able to build > that driver. > > Signed-off-by: Arnd Bergmann > --- > arch/arm/mach-omap2/Kconfig | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 57b66d5..4deeade 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2 > select SERIAL_CORE_CONSOLE > select SERIAL_8250_CONSOLE > select REGULATOR_FIXED_VOLTAGE > + select TWL4030_CORE > + select I2C > Another option to ensure I2C is selected when TWL* drivers are selected is let it depends on I2C. That wat we can avoid patching every machine entry with I2C option. Not a strong opinion though. Regards Santosh