From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Tobias Schandinat Subject: Re: [GIT PULL] OMAP DSS fixes for 3.3-rc Date: Mon, 30 Jan 2012 05:22:42 +0000 Message-ID: <4F262922.5090109@gmx.de> References: <1327579651.1895.34.camel@deskari> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: Received: from mailout-de.gmx.net ([213.165.64.23]:57965 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751556Ab2A3FWx (ORCPT ); Mon, 30 Jan 2012 00:22:53 -0500 In-Reply-To: <1327579651.1895.34.camel@deskari> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen Cc: "linux-fbdev@vger.kernel.org" , linux-omap mailing list Hi Tomi, On 01/26/2012 12:07 PM, Tomi Valkeinen wrote: > Hi Florian, > > Here are two major fixes for OMAP DSS driver. > > The first (OMAPDSS: use sync versions...) fixes problem with system > suspend, which causes omapdss power management to give WARNs and > generally malfunction on system suspend/resume. > > The second (the rest of the patches) implements a workaround for HW bug, > which causes physical damage to the board if the HDMI cable is > disconnected at a "wrong" time. The actual fix is in the last patch, but > the board files needed some cleanups and a new GPIO, which is what the > smaller patches do. > > The branch is based on fbdev/fbdev-next. Is that ok? Yes, that worked well, as I didn't start to collect 3.4 material there. Merged. Thanks, Florian Tobias Schandinat > > Tomi > > > The following changes since commit f787f32e67e00b072f46b2ae3c454d2c0a1fcdb7: > > module_param: make bool parameters really bool (drivers/video/i810) (2012-01-12 23:28:59 +0000) > > are available in the git repository at: > git://gitorious.org/linux-omap-dss2/linux.git for-3.3-rc > > Tomi Valkeinen (7): > OMAPDSS: use sync versions of pm_runtime_put > OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios > OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD > OMAPDSS: remove wrong HDMI HPD muxing > OMAP: 4430SDP/Panda: setup HDMI GPIO muxes > OMAP: 4430SDP/Panda: add HDMI HPD gpio > OMAPDSS: HDMI: PHY burnout fix > > arch/arm/mach-omap2/board-4430sdp.c | 18 ++++++-- > arch/arm/mach-omap2/board-omap4panda.c | 18 ++++++-- > arch/arm/mach-omap2/display.c | 4 -- > drivers/video/omap2/dss/dispc.c | 2 +- > drivers/video/omap2/dss/dsi.c | 2 +- > drivers/video/omap2/dss/dss.c | 2 +- > drivers/video/omap2/dss/hdmi.c | 5 ++- > drivers/video/omap2/dss/rfbi.c | 2 +- > drivers/video/omap2/dss/ti_hdmi.h | 4 ++ > drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++++++++-- > drivers/video/omap2/dss/venc.c | 2 +- > include/video/omapdss.h | 5 ++ > 12 files changed, 110 insertions(+), 22 deletions(-) >