From: Shubhrajyoti <shubhrajyoti-l0cyMroinI0@public.gmane.org>
To: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Subject: Re: [PATCHv7 00/18] I2C updates
Date: Wed, 11 Apr 2012 16:31:22 +0530 [thread overview]
Message-ID: <4F856482.4030305@ti.com> (raw)
In-Reply-To: <1334141549-8288-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
Please ignore this series sent the wrong patches by mistake.
Will resend.
On Wednesday 11 April 2012 04:22 PM, Shubhrajyoti D wrote:
> The patch series does the following
>
> - Warn fixes if CONFIG_PM_RUNTIME is not selected.
> - I2C register restore only if context if the context is lost
> - Bus busy recovery mechanism.
> - the reset is not done in init.
> - Adds a patch to use devm_* functions
> - Also checks the return type of the get_sync and in case
> of errors prevents register access, also print the cause of
> failure in case of errors.
> - In case of i2c remove register access was done without any
> get_sync fix the same.
> - Adds a pdata function pointer to do context save restore
> - Split the omap_i2c_isr to increase readability
> - Make the i2c use SET_RUNTIME_PM_OPS
> - Folds a patch from Tasslehoff to prevent any merge conflicts.
> - Prevents the XDUF flag to be set if the underflow condition is not met.
> - As per discussion in [1] .Adds a patch to rename the 1p153 errata and
> use the unique id instead as the section number in the recent errata
> docs has changed.
>
> - As discussed in [2] Paul has queued the flag for context restore patch,
> removing it from the series.
>
>
> [1] http://www.spinics.net/lists/linux-i2c/msg07607.html
> [2] http://www.spinics.net/lists/linux-i2c/msg07685.html
>
> Tested on omap4sdp and omap3sdp.
>
>
> The following changes since commit 258f742635360175564e9470eb060ff4d4b984e7:
>
> modpost: Fix modpost license checking of vmlinux.o (2012-04-09 20:52:56 -0700)
>
> are available in the git repository at:
> git://gitorious.org/linus-tree/linus-tree.git i2c_omap-next
>
>
>
> Jon Hunter (1):
> I2C: OMAP: Correct I2C revision for OMAP3
>
> Shubhrajyoti D (15):
> I2C: OMAP: make omap_i2c_unidle/idle functions depend on
> CONFIG_PM_RUNTIME
> I2C: OMAP: Remove reset at init
> I2C: OMAP: I2C register restore only if context is lost
> I2C: OMAP: Fix the interrupt clearing in OMAP4
> I2C: OMAP: Fix the mismatch of pm_runtime enable and disable
> I2C: OMAP: Optimise the remove code
> I2C: OMAP: Fix the error handling
> I2C: OMAP: Don't check if wait_for_completion_timeout() returns less
> than zero
> I2C: OMAP: use devm_* functions
> I2C: OMAP: Fix the crash in i2c remove
> I2C: OMAP: Handle error check for pm runtime
> I2C: OMAP: Use SET_RUNTIME_PM_OPS
> I2C: OMAP: make the read ready processing a separate function
> I2C: OMAP: Do not set the XUDF if the underflow is not reached
> I2C: OMAP: Rename the 1p153 to the erratum id i462
>
> Tasslehoff Kjappfot (1):
> I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153
>
> Vikram Pandita (1):
> I2C: OMAP: Recover from Bus Busy condition
>
> arch/arm/plat-omap/i2c.c | 3 +
> drivers/i2c/busses/i2c-omap.c | 348 +++++++++++++++++++++++------------------
> include/linux/i2c-omap.h | 1 +
> 3 files changed, 198 insertions(+), 154 deletions(-)
>
next prev parent reply other threads:[~2012-04-11 11:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-11 10:52 [PATCHv7 00/18] I2C updates Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 01/18] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 04/18] I2C: OMAP: I2C register restore only if context is lost Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4 Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 07/18] I2C: OMAP: Optimise the remove code Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 08/18] I2C: OMAP: Fix the error handling Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 09/18] I2C: OMAP: Correct I2C revision for OMAP3 Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 10/18] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero Shubhrajyoti D
[not found] ` <1334141549-8288-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
2012-04-11 10:52 ` [PATCHv7 02/18] I2C: OMAP: Remove reset at init Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 03/18] I2C: OMAP: Recover from Bus Busy condition Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 06/18] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 11/18] I2C: OMAP: use devm_* functions Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 12/18] I2C: OMAP: Fix the crash in i2c remove Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 14/18] I2C: OMAP: Use SET_RUNTIME_PM_OPS Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 15/18] I2C: OMAP: make the read ready processing a separate function Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached Shubhrajyoti D
2012-04-11 11:01 ` Shubhrajyoti [this message]
2012-04-11 10:52 ` [PATCHv7 13/18] I2C: OMAP: Handle error check for pm runtime Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153 Shubhrajyoti D
2012-04-11 10:52 ` [PATCHv7 18/18] I2C: OMAP: Rename the 1p153 to the erratum id i462 Shubhrajyoti D
-- strict thread matches above, loose matches on Subject: below --
2012-04-11 11:12 [PATCHv7 00/18] I2C updates Shubhrajyoti D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F856482.4030305@ti.com \
--to=shubhrajyoti-l0cymroini0@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
--cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox