Re: [PATCH] ARM: OMAP3: cm-t35: add support for power off

[Igor Grinberg <grinberg@compulab.co.il>]

ping!

Tony, can this please, go into 3.5?

On 03/28/12 11:51, Igor Grinberg wrote:
> Enable the power off feature of the TPS65930 on-board PMIC.
> 
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
>  arch/arm/mach-omap2/board-cm-t35.c |    5 +++++
>  1 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index 8770be1..46275c6 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -499,6 +499,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
>  	.setup          = cm_t35_twl_gpio_setup,
>  };
>  
> +static struct twl4030_power_data cm_t35_power_data = {
> +	.use_poweroff	= true,
> +};
> +
>  static struct twl4030_platform_data cm_t35_twldata = {
>  	/* platform_data for children goes here */
>  	.keypad		= &cm_t35_kp_data,
> @@ -506,6 +510,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
>  	.vmmc1		= &cm_t35_vmmc1,
>  	.vsim		= &cm_t35_vsim,
>  	.vio		= &cm_t35_vio,
> +	.power		= &cm_t35_power_data,
>  };
>  
>  static void __init cm_t35_init_i2c(void)

-- 
Regards,
Igor.