From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajendra Nayak Subject: Re: [RFC 00/24] Move OMAP2+ over to use COMMON clock Date: Mon, 04 Jun 2012 14:08:10 +0530 Message-ID: <4FCC73F2.4030808@ti.com> References: <1338552485-31325-1-git-send-email-rnayak@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from na3sys009aog118.obsmtp.com ([74.125.149.244]:47933 "EHLO na3sys009aog118.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752823Ab2FDIiR (ORCPT ); Mon, 4 Jun 2012 04:38:17 -0400 Received: by obhx4 with SMTP id x4so8211912obh.6 for ; Mon, 04 Jun 2012 01:38:16 -0700 (PDT) In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Paul Walmsley Cc: mturquette@ti.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org On Friday 01 June 2012 07:07 PM, Paul Walmsley wrote: > On Fri, 1 Jun 2012, Rajendra Nayak wrote: > >> This RFC series is based of Mikes' latest clk-next. I will >> rebase it once 3.5-rc1 is out and post with more testing thats >> in progress. Meanwhile, the RFC is for me to get some early >> feedback on the patches. > > Please describe further what's been tested with this series, and what > hasn't been. Hi Paul, I have been mostly boot-testing on the OMAP3/4 boards I have access to, 3430SDP, 3630 Beagle, 4430 Panda/SDP. Apart from this I was using omapconf to run the clkspeed audit tests on OMAP4. I used powerdebug to make sure the tree modeling (parent/child relations, clk rates etc) are sane after bootup. I haven't done any low power tests around suspend/idle for OMAP3 or OMAP4 which is on my list to do before I do a repost/rebase on 3.5-rc1. And so is testing on OMAP2430sdp and N800. Any other tests you recommend I do? Meanwhile it would be good to know if you see any major issues around the migration itself and/or the way the patches are structured. regards, Rajendra > > > - Paul