From: koen@dominion.thruhere.net
To: linux-omap@vger.kernel.org
Cc: jkridner@beagleboard.org, Koen Kooi <koen@dominion.thruhere.net>
Subject: [PATCHv2] OMAP3: beagle: add support for beagleboard xM revision C
Date: Fri, 20 May 2011 12:59:07 +0200 [thread overview]
Message-ID: <4dd6498f.4b1be30a.2c53.ffffd0ca@mx.google.com> (raw)
In-Reply-To: <y>
From: Koen Kooi <koen@dominion.thruhere.net>
The USB enable GPIO has been inverted and the USER button moved.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
Changes since v1:
Fixed more xM references
arch/arm/mach-omap2/board-omap3beagle.c | 32 +++++++++++++++++++++++-------
1 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 2de4b02..1eb1e8e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -62,7 +62,9 @@
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMA = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMB = GPIO173, GPIO172, GPIO171: 0 0 1
+ * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -70,6 +72,7 @@ enum {
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
+ OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
@@ -124,9 +127,17 @@ static void __init omap3_beagle_init_rev(void)
printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
break;
+ case 1:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM B\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ break;
+ case 2:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
+ break;
default:
- printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+ printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd, assuming xM C or newer\n", beagle_rev);
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
}
return;
@@ -278,7 +289,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
{
int r;
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
mmc[0].gpio_wp = -EINVAL;
} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
@@ -298,7 +309,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
- if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
+ if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM && omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XMC) {
r = gpio_request(gpio + 1, "EHCI_nOC");
if (!r) {
r = gpio_direction_input(gpio + 1);
@@ -320,7 +331,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
/* DVI reset GPIO is different between beagle revisions */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)
beagle_dvi_device.reset_gpio = 129;
else
beagle_dvi_device.reset_gpio = 170;
@@ -334,7 +345,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
* P7/P8 revisions(prototype): Camera EN
* A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
*/
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
r = gpio_request(gpio + 1, "nDVI_PWR_EN");
if (!r) {
r = gpio_direction_output(gpio + 1, 0);
@@ -625,7 +636,7 @@ static void __init beagle_opp_init(void)
}
/* Custom OPP enabled for XM */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
@@ -665,6 +676,11 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
+
+ if (cpu_is_omap3630()) {
+ gpio_buttons[0].gpio = 4;
+ }
+
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
--
1.6.6.1
next reply other threads:[~2011-05-20 10:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-20 10:59 koen [this message]
2011-05-22 14:30 ` [PATCHv2] OMAP3: beagle: add support for beagleboard xM revision C Igor Grinberg
2011-05-23 17:51 ` Koen Kooi
-- strict thread matches above, loose matches on Subject: below --
2011-05-24 9:48 koen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4dd6498f.4b1be30a.2c53.ffffd0ca@mx.google.com \
--to=koen@dominion.thruhere.net \
--cc=jkridner@beagleboard.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).