* NFS mount issue with OMAP4 on linux-next
@ 2012-07-24 6:07 Archit Taneja
2012-07-24 6:18 ` Archit Taneja
0 siblings, 1 reply; 4+ messages in thread
From: Archit Taneja @ 2012-07-24 6:07 UTC (permalink / raw)
To: linux-omap@vger.kernel.org
Hi,
I am not able to mount a filesyatem via NFS on OMAP4 SDP with the
current linux-next kernel. The same thing works fine with OMAP3 SDP.
Some more info:
- initramfs works fine with OMAP4 SDP.
- NFS mount on OMAP4 SDP works fine with mainline kernel.
- Logs below (No output on console after the last print, but console
takes input)
Thanks,
Archit
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.5.0-next-20120723 (a0393947@a0393947pc)
(gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #68 SMP Tue Jul 24
11:30:19 IST 2012
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7),
cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: OMAP4430 4430SDP board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1526000 s12736 r8192
d15936 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259840
[ 0.000000] Kernel command line: mem=1G console=ttyO2,115200n8
noinitrd root=/dev/nfs rw
nfsroot=172.24.137.248:/nfs-share/mnt/,nolock,tcp,rsize=2048,wsize=2048,tcp
ip=172.24.190.136 no_console_suspend
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 759MB 264MB = 1023MB total
[ 0.000000] Memory: 1025032k/1025032k available, 23544k reserved,
270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06ca0c4 (6921 kB)
[ 0.000000] .init : 0xc06cb000 - 0xc071a1c0 ( 317 kB)
[ 0.000000] .data : 0xc071c000 - 0xc07b8000 ( 624 kB)
[ 0.000000] .bss : 0xc07b8024 - 0xc0d1260c (5482 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:474
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for
dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000823] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[ 0.054565] pid_max: default: 32768 minimum: 301
[ 0.055084] Security Framework initialized
[ 0.055267] Mount-cache hash table entries: 512
[ 0.059051] CPU: Testing write buffer coherency: ok
[ 0.059936] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060272] Setting up static identity map for 0x804f96a0 - 0x804f9710
[ 0.060363] L310 cache controller enabled
[ 0.060363] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000,
Cache size: 1048576 B
[ 0.063385] CPU1: Booted secondary processor
[ 0.130554] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.130615] CPU1: Unknown IPI message 0x0
[ 0.131103] Brought up 2 CPUs
[ 0.131103] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
[ 0.139221] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.143218] omap_hwmod: sl2if: cannot be enabled for reset (3)
[ 0.147216] omap_hwmod: mcpdm: cannot be enabled for reset (3)
[ 0.147338] omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
[ 0.147369] omap_hwmod: cm_core: cannot be enabled for reset (3)
[ 0.151733] dummy:
[ 0.152709] NET: Registered protocol family 16
[ 0.154144] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.154571] GPMC revision 6.0
[ 0.154693] gpmc: irq-52 could not claim: err -22
[ 0.159576] OMAP GPIO hardware version 0.1
[ 0.166137] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.167541] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.171203] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.171203] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.217803] Error setting wl12xx data: -38
[ 0.223114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
watchpoint registers.
[ 0.223114] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.231445] OMAP DMA hardware revision 0.0
[ 0.258178] bio: create slab <bio-0> at 0
[ 0.259674] VBAT: 3750 mV
[ 0.260223] vwl1271: 1800 mV
[ 0.262603] SCSI subsystem initialized
[ 0.263702] usbcore: registered new interface driver usbfs
[ 0.263916] usbcore: registered new interface driver hub
[ 0.264221] usbcore: registered new device driver usb
[ 0.279205] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.281311] Skipping twl internal clock init and using bootloader
value (unknown osc rate)
[ 0.282257] twl 1-0048: PIH (irq 39) chaining IRQs 352..372
[ 0.283721] VUSB: 3300 mV normal standby
[ 0.284545] vdd_mpu: 500 <--> 1500 mV normal
[ 0.285400] vdd_iva: 500 <--> 1500 mV normal
[ 0.286224] vdd_core: 500 <--> 1500 mV normal
[ 0.287750] V1V8: 1800 mV normal standby
[ 0.288574] V2V1: 2100 mV normal standby
[ 0.289520] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.290710] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.291839] VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
[ 0.293090] VCXIO: 1800 mV normal standby
[ 0.293151] VCXIO: supplied by V2V1
[ 0.295013] VDAC: 1800 mV normal standby
[ 0.295043] VDAC: supplied by V2V1
[ 0.296447] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
[ 0.297546] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.298706] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.300201] VANA: 2100 mV normal standby
[ 0.310333] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.325927] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 400 kHz
[ 0.341522] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.345489] Switching to clocksource 32k_counter
[ 0.404449] NET: Registered protocol family 2
[ 0.405761] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.407989] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.423126] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.423431] TCP: reno registered
[ 0.423461] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.423706] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.424468] NET: Registered protocol family 1
[ 0.425262] RPC: Registered named UNIX socket transport module.
[ 0.425292] RPC: Registered udp transport module.
[ 0.425292] RPC: Registered tcp transport module.
[ 0.425292] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.425811] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.550140] bounce pool size: 64 pages
[ 0.550537] VFS: Disk quotas dquot_6.5.2
[ 0.550689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.552185] NFS: Registering the id_resolver key type
[ 0.552490] Key type id_resolver registered
[ 0.552581] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
Hat, Inc.
[ 0.552978] msgmni has been set to 1474
[ 0.554565] io scheduler noop registered
[ 0.554565] io scheduler deadline registered
[ 0.554626] io scheduler cfq registered (default)
[ 0.555755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.558868] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a
OMAP UART0
[ 0.559814] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a
OMAP UART1
[ 0.560424] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a
OMAP UART2
[ 1.334014] console [ttyO2] enabled
[ 1.338409] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a
OMAP UART3
[ 1.360443] brd: module loaded
[ 1.372375] loop: module loaded
[ 1.378295] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.385589] OneNAND driver initializing
[ 1.391540] spi spi1.0: no RX DMA engine channel for McSPI
[ 1.397460] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
[ 1.404296] omap2_mcspi omap2_mcspi.1: can't create new device for ks8851
[ 1.415222] usbcore: registered new interface driver asix
[ 1.421142] usbcore: registered new interface driver cdc_ether
[ 1.427490] usbcore: registered new interface driver smsc95xx
[ 1.433715] usbcore: registered new interface driver net1080
[ 1.439849] usbcore: registered new interface driver cdc_subset
[ 1.446228] usbcore: registered new interface driver zaurus
[ 1.452331] usbcore: registered new interface driver cdc_ncm
[ 1.459197] usbcore: registered new interface driver cdc_wdm
[ 1.465118] Initializing USB Mass Storage driver...
[ 1.470458] usbcore: registered new interface driver usb-storage
[ 1.476745] USB Mass Storage support registered.
[ 1.482116] usbcore: registered new interface driver libusual
[ 1.488403] usbcore: registered new interface driver usbtest
[ 1.495025] mousedev: PS/2 mouse device common for all mice
[ 1.503112] twl_rtc twl_rtc: Power up reset detected.
[ 1.509063] twl_rtc twl_rtc: Enabling TWL-RTC
[ 1.516632] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.523498] i2c /dev entries driver
[ 1.529113] Driver for 1-wire Dallas network protocol.
[ 1.536254] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout
60 sec
[ 1.545135] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
[ 1.551361] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine
channel 48
[ 1.559234] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[ 1.565460] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine
channel 62
[ 1.573181] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
[ 1.579376] omap_hsmmc omap_hsmmc.4: unable to obtain RX DMA engine
channel 60
[ 1.588012] usbcore: registered new interface driver usbhid
[ 1.593841] usbhid: USB HID core driver
[ 1.597869] oprofile: hardware counters not available
[ 1.603118] oprofile: using timer interrupt.
[ 1.608032] TCP: cubic registered
[ 1.611511] Initializing XFRM netlink socket
[ 1.616027] NET: Registered protocol family 17
[ 1.620910] NET: Registered protocol family 15
[ 1.625793] Key type dns_resolver registered
[ 1.630371] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 1
[ 1.643066] omap_vc_i2c_init: I2C config for vdd_iva does not match
other channels (0).
[ 1.651275] omap_vc_i2c_init: I2C config for vdd_mpu does not match
other channels (0).[ 1.660583] Power Management for TI OMAP4.
[ 1.664978] ThumbEE CPU extension supported.
[ 1.685333] clock: disabling unused clocks to save power
[ 1.693359] VANA: incomplete constraints, leaving on
[ 1.699554] VAUX1_6030: incomplete constraints, leaving on
[ 1.705627] VDAC: incomplete constraints, leaving on
[ 1.711791] VMMC: incomplete constraints, leaving on
[ 1.718444] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.727539] twl_rtc twl_rtc: setting system clock to 2000-01-01
00:00:00 UTC (946684800)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NFS mount issue with OMAP4 on linux-next
2012-07-24 6:07 NFS mount issue with OMAP4 on linux-next Archit Taneja
@ 2012-07-24 6:18 ` Archit Taneja
2012-07-24 6:53 ` S, Venkatraman
0 siblings, 1 reply; 4+ messages in thread
From: Archit Taneja @ 2012-07-24 6:18 UTC (permalink / raw)
To: linux-omap@vger.kernel.org
Hi,
Comparing with working logs, I see this difference:
[ 1.502166] spi spi1.0: no RX DMA engine channel for McSPI
[ 1.507904] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
[ 1.514862] omap2_mcspi omap2_mcspi.1: can't create new device for ks8851
I guess that's why it isn't working?
Archit
On Tuesday 24 July 2012 11:37 AM, Archit Taneja wrote:
> Hi,
>
> I am not able to mount a filesyatem via NFS on OMAP4 SDP with the
> current linux-next kernel. The same thing works fine with OMAP3 SDP.
>
> Some more info:
>
> - initramfs works fine with OMAP4 SDP.
> - NFS mount on OMAP4 SDP works fine with mainline kernel.
> - Logs below (No output on console after the last print, but console
> takes input)
>
> Thanks,
> Archit
>
> [ 0.000000] Booting Linux on physical CPU 0
> [ 0.000000] Linux version 3.5.0-next-20120723 (a0393947@a0393947pc)
> (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #68 SMP Tue Jul 24
> 11:30:19 IST 2012
> [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7),
> cr=10c53c7d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
> [ 0.000000] Machine: OMAP4430 4430SDP board
> [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
> [ 0.000000] OMAP4430 ES2.1
> [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1526000 s12736 r8192
> d15936 u36864
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 259840
> [ 0.000000] Kernel command line: mem=1G console=ttyO2,115200n8
> noinitrd root=/dev/nfs rw
> nfsroot=172.24.137.248:/nfs-share/mnt/,nolock,tcp,rsize=2048,wsize=2048,tcp
> ip=172.24.190.136 no_console_suspend
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 0.000000] Memory: 759MB 264MB = 1023MB total
> [ 0.000000] Memory: 1025032k/1025032k available, 23544k reserved,
> 270336K highmem
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc06ca0c4 (6921 kB)
> [ 0.000000] .init : 0xc06cb000 - 0xc071a1c0 ( 317 kB)
> [ 0.000000] .data : 0xc071c000 - 0xc07b8000 ( 624 kB)
> [ 0.000000] .bss : 0xc07b8024 - 0xc0d1260c (5482 kB)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:474
> [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for
> dpll_mpu_m2_ck.
> [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
> [ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
> [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
> every 131071999ms
> [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
> [ 0.000000] Console: colour dummy device 80x30
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
> Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 3695 kB
> [ 0.000000] per task-struct memory footprint: 1152 bytes
> [ 0.000823] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
> [ 0.054565] pid_max: default: 32768 minimum: 301
> [ 0.055084] Security Framework initialized
> [ 0.055267] Mount-cache hash table entries: 512
> [ 0.059051] CPU: Testing write buffer coherency: ok
> [ 0.059936] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.060272] Setting up static identity map for 0x804f96a0 - 0x804f9710
> [ 0.060363] L310 cache controller enabled
> [ 0.060363] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000,
> Cache size: 1048576 B
> [ 0.063385] CPU1: Booted secondary processor
> [ 0.130554] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.130615] CPU1: Unknown IPI message 0x0
> [ 0.131103] Brought up 2 CPUs
> [ 0.131103] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
> [ 0.139221] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
> [ 0.143218] omap_hwmod: sl2if: cannot be enabled for reset (3)
> [ 0.147216] omap_hwmod: mcpdm: cannot be enabled for reset (3)
> [ 0.147338] omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
> [ 0.147369] omap_hwmod: cm_core: cannot be enabled for reset (3)
> [ 0.151733] dummy:
> [ 0.152709] NET: Registered protocol family 16
> [ 0.154144] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> [ 0.154571] GPMC revision 6.0
> [ 0.154693] gpmc: irq-52 could not claim: err -22
> [ 0.159576] OMAP GPIO hardware version 0.1
> [ 0.166137] omap_mux_init: Add partition: #1: core, flags: 2
> [ 0.167541] omap_mux_init: Add partition: #2: wkup, flags: 2
> [ 0.171203] _omap_mux_get_by_name: Could not find signal
> uart1_rx.uart1_rx
> [ 0.171203] _omap_mux_get_by_name: Could not find signal
> uart1_rx.uart1_rx
> [ 0.217803] Error setting wl12xx data: -38
> [ 0.223114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
> watchpoint registers.
> [ 0.223114] hw-breakpoint: maximum watchpoint size is 4 bytes.
> [ 0.231445] OMAP DMA hardware revision 0.0
> [ 0.258178] bio: create slab <bio-0> at 0
> [ 0.259674] VBAT: 3750 mV
> [ 0.260223] vwl1271: 1800 mV
> [ 0.262603] SCSI subsystem initialized
> [ 0.263702] usbcore: registered new interface driver usbfs
> [ 0.263916] usbcore: registered new interface driver hub
> [ 0.264221] usbcore: registered new device driver usb
> [ 0.279205] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
> [ 0.281311] Skipping twl internal clock init and using bootloader
> value (unknown osc rate)
> [ 0.282257] twl 1-0048: PIH (irq 39) chaining IRQs 352..372
> [ 0.283721] VUSB: 3300 mV normal standby
> [ 0.284545] vdd_mpu: 500 <--> 1500 mV normal
> [ 0.285400] vdd_iva: 500 <--> 1500 mV normal
> [ 0.286224] vdd_core: 500 <--> 1500 mV normal
> [ 0.287750] V1V8: 1800 mV normal standby
> [ 0.288574] V2V1: 2100 mV normal standby
> [ 0.289520] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
> [ 0.290710] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
> [ 0.291839] VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
> [ 0.293090] VCXIO: 1800 mV normal standby
> [ 0.293151] VCXIO: supplied by V2V1
> [ 0.295013] VDAC: 1800 mV normal standby
> [ 0.295043] VDAC: supplied by V2V1
> [ 0.296447] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
> [ 0.297546] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
> [ 0.298706] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
> [ 0.300201] VANA: 2100 mV normal standby
> [ 0.310333] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
> [ 0.325927] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 400 kHz
> [ 0.341522] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
> [ 0.345489] Switching to clocksource 32k_counter
> [ 0.404449] NET: Registered protocol family 2
> [ 0.405761] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.407989] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
> [ 0.423126] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.423431] TCP: reno registered
> [ 0.423461] UDP hash table entries: 512 (order: 3, 40960 bytes)
> [ 0.423706] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> [ 0.424468] NET: Registered protocol family 1
> [ 0.425262] RPC: Registered named UNIX socket transport module.
> [ 0.425292] RPC: Registered udp transport module.
> [ 0.425292] RPC: Registered tcp transport module.
> [ 0.425292] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 0.425811] NetWinder Floating Point Emulator V0.97 (double precision)
> [ 0.550140] bounce pool size: 64 pages
> [ 0.550537] VFS: Disk quotas dquot_6.5.2
> [ 0.550689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.552185] NFS: Registering the id_resolver key type
> [ 0.552490] Key type id_resolver registered
> [ 0.552581] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
> Hat, Inc.
> [ 0.552978] msgmni has been set to 1474
> [ 0.554565] io scheduler noop registered
> [ 0.554565] io scheduler deadline registered
> [ 0.554626] io scheduler cfq registered (default)
> [ 0.555755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.558868] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a
> OMAP UART0
> [ 0.559814] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a
> OMAP UART1
> [ 0.560424] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a
> OMAP UART2
> [ 1.334014] console [ttyO2] enabled
> [ 1.338409] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a
> OMAP UART3
> [ 1.360443] brd: module loaded
> [ 1.372375] loop: module loaded
> [ 1.378295] mtdoops: mtd device (mtddev=name/number) must be supplied
> [ 1.385589] OneNAND driver initializing
> [ 1.391540] spi spi1.0: no RX DMA engine channel for McSPI
> [ 1.397460] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
> [ 1.404296] omap2_mcspi omap2_mcspi.1: can't create new device for
> ks8851
> [ 1.415222] usbcore: registered new interface driver asix
> [ 1.421142] usbcore: registered new interface driver cdc_ether
> [ 1.427490] usbcore: registered new interface driver smsc95xx
> [ 1.433715] usbcore: registered new interface driver net1080
> [ 1.439849] usbcore: registered new interface driver cdc_subset
> [ 1.446228] usbcore: registered new interface driver zaurus
> [ 1.452331] usbcore: registered new interface driver cdc_ncm
> [ 1.459197] usbcore: registered new interface driver cdc_wdm
> [ 1.465118] Initializing USB Mass Storage driver...
> [ 1.470458] usbcore: registered new interface driver usb-storage
> [ 1.476745] USB Mass Storage support registered.
> [ 1.482116] usbcore: registered new interface driver libusual
> [ 1.488403] usbcore: registered new interface driver usbtest
> [ 1.495025] mousedev: PS/2 mouse device common for all mice
> [ 1.503112] twl_rtc twl_rtc: Power up reset detected.
> [ 1.509063] twl_rtc twl_rtc: Enabling TWL-RTC
> [ 1.516632] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
> [ 1.523498] i2c /dev entries driver
> [ 1.529113] Driver for 1-wire Dallas network protocol.
> [ 1.536254] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout
> 60 sec
> [ 1.545135] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
> [ 1.551361] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine
> channel 48
> [ 1.559234] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
> [ 1.565460] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine
> channel 62
> [ 1.573181] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
> [ 1.579376] omap_hsmmc omap_hsmmc.4: unable to obtain RX DMA engine
> channel 60
> [ 1.588012] usbcore: registered new interface driver usbhid
> [ 1.593841] usbhid: USB HID core driver
> [ 1.597869] oprofile: hardware counters not available
> [ 1.603118] oprofile: using timer interrupt.
> [ 1.608032] TCP: cubic registered
> [ 1.611511] Initializing XFRM netlink socket
> [ 1.616027] NET: Registered protocol family 17
> [ 1.620910] NET: Registered protocol family 15
> [ 1.625793] Key type dns_resolver registered
> [ 1.630371] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 1
> [ 1.643066] omap_vc_i2c_init: I2C config for vdd_iva does not match
> other channels (0).
> [ 1.651275] omap_vc_i2c_init: I2C config for vdd_mpu does not match
> other channels (0).[ 1.660583] Power Management for TI OMAP4.
> [ 1.664978] ThumbEE CPU extension supported.
> [ 1.685333] clock: disabling unused clocks to save power
> [ 1.693359] VANA: incomplete constraints, leaving on
> [ 1.699554] VAUX1_6030: incomplete constraints, leaving on
> [ 1.705627] VDAC: incomplete constraints, leaving on
> [ 1.711791] VMMC: incomplete constraints, leaving on
> [ 1.718444] input: gpio-keys as /devices/platform/gpio-keys/input/input0
> [ 1.727539] twl_rtc twl_rtc: setting system clock to 2000-01-01
> 00:00:00 UTC (946684800)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NFS mount issue with OMAP4 on linux-next
2012-07-24 6:18 ` Archit Taneja
@ 2012-07-24 6:53 ` S, Venkatraman
2012-07-24 7:07 ` Archit Taneja
0 siblings, 1 reply; 4+ messages in thread
From: S, Venkatraman @ 2012-07-24 6:53 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap@vger.kernel.org
On Tue, Jul 24, 2012 at 11:48 AM, Archit Taneja <a0393947@ti.com> wrote:
> Hi,
>
> Comparing with working logs, I see this difference:
>
> [ 1.502166] spi spi1.0: no RX DMA engine channel for McSPI
> [ 1.507904] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
> [ 1.514862] omap2_mcspi omap2_mcspi.1: can't create new device for ks8851
>
> I guess that's why it isn't working?
>
Most likely yes. SPI is needed for ethernet on OMAP4.
Please include this patch in your build and check..
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=commit;h=55936cdfaaf11ac352b56bc58e42d6661e65ee13
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: NFS mount issue with OMAP4 on linux-next
2012-07-24 6:53 ` S, Venkatraman
@ 2012-07-24 7:07 ` Archit Taneja
0 siblings, 0 replies; 4+ messages in thread
From: Archit Taneja @ 2012-07-24 7:07 UTC (permalink / raw)
To: S, Venkatraman; +Cc: linux-omap@vger.kernel.org
On Tuesday 24 July 2012 12:23 PM, S, Venkatraman wrote:
> On Tue, Jul 24, 2012 at 11:48 AM, Archit Taneja <a0393947@ti.com> wrote:
>> Hi,
>>
>> Comparing with working logs, I see this difference:
>>
>> [ 1.502166] spi spi1.0: no RX DMA engine channel for McSPI
>> [ 1.507904] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
>> [ 1.514862] omap2_mcspi omap2_mcspi.1: can't create new device for ks8851
>>
>> I guess that's why it isn't working?
>>
> Most likely yes. SPI is needed for ethernet on OMAP4.
> Please include this patch in your build and check..
> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=commit;h=55936cdfaaf11ac352b56bc58e42d6661e65ee13
It works fine with this.
Thanks,
Archit
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-07-24 7:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-24 6:07 NFS mount issue with OMAP4 on linux-next Archit Taneja
2012-07-24 6:18 ` Archit Taneja
2012-07-24 6:53 ` S, Venkatraman
2012-07-24 7:07 ` Archit Taneja
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox