linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Dave Martin <dave.martin@linaro.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Nicolas Pitre <nico@fluxnic.net>,
	Russell King - ARM Linux <linux@arm.linux.org.uk>
Subject: Re: [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode
Date: Mon, 08 Oct 2012 12:33:03 +0100	[thread overview]
Message-ID: <5072B9EF.1020005@arm.com> (raw)
In-Reply-To: <20121008110109.GE2302@linaro.org>

[-- Attachment #1: Type: text/plain, Size: 2964 bytes --]

On 08/10/12 12:01, Dave Martin wrote:
> On Sat, Oct 06, 2012 at 09:00:32AM -0700, Tony Lindgren wrote:
>> * Marc Zyngier <marc.zyngier@arm.com> [121006 03:19]:
>>>
>>> If so, that indicates some side effect of the safe_svcmode_maskall macro,
>>> and I suspect the "movs pc, lr" bit.
>>>
>>> Can you try the attached patch? It basically falls back to the previous
>>> behaviour if not entered in HYP mode.
>> ...
>>
>>> diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
>>> index 658a15d..b21b97f 100644
>>> --- a/arch/arm/include/asm/assembler.h
>>> +++ b/arch/arm/include/asm/assembler.h
>>> @@ -254,16 +254,17 @@
>>>  	mov	lr , \reg
>>>  	and	lr , lr , #MODE_MASK
>>>  	cmp	lr , #HYP_MODE
>>> -	orr	\reg , \reg , #PSR_A_BIT | PSR_I_BIT | PSR_F_BIT
>>> +	orr	\reg , \reg , #PSR_I_BIT | PSR_F_BIT
>>>  	bic	\reg , \reg , #MODE_MASK
>>>  	orr	\reg , \reg , #SVC_MODE
>>>  THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
>>> -	msr	spsr_cxsf, \reg
>>> -	adr	lr, BSYM(2f)
>>>  	bne	1f
>>> +	orr	\reg, \reg, #PSR_A_BIT
>>> +	adr	lr, BSYM(2f)
>>> +	msr	spsr_cxsf, \reg
>>>  	__MSR_ELR_HYP(14)
>>>  	__ERET
>>> -1:	movs	pc, lr
>>> +1:	msr	cpsr_c, \reg
>>>  2:
>>>  .endm
>>>  
>>
>> The minimal version of this that still boots on my n800 is just
>> the last change of the above patch:
>>
>> --- a/arch/arm/include/asm/assembler.h
>> +++ b/arch/arm/include/asm/assembler.h
>> @@ -263,7 +263,7 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
>>  	bne	1f
>>  	__MSR_ELR_HYP(14)
>>  	__ERET
>> -1:	movs	pc, lr
>> +1:	msr	cpsr_c, \reg
>>  2:
>>  .endm
>>  
> 
> In an attempt to narrow this down...
> 
> Can you follow this (i.e., _after_ a known successful switch to SVC mode)
> 
> (a)
> 	mrs	\reg, cpsr
> 	msr	spsr_cxsf, \reg
> 	adr	\reg, 3f
> 	movs	pc, lr
> 3:
> 
> and (b)
> 
> 	mrs	\reg, cpsr
> 	orr	\reg, \reg, #CPSR_A_BIT
> 	msr	cpsr_cxsf, \reg
> 
> and (c)
> 
> 	mrs	\reg, cpsr
> 	orr	\reg, \reg, #CPSR_A_BIT
> 	msr	spsr_cxsf, \reg
> 	adr	\reg, 3f
> 	movs	pc, lr
> 3:
> 
> 
> 
> 
> If only (a) works, this would suggest that the attempt to set the A bit
> is causing the problem.
> 
> If only (b) works, this suggests that the A bit is OK but that some
> invalid hardware state, or something else we don't understand, is causing
> exception returns to fail in general.
> 
> If (a) and (b) work but (c) fails, this suggests that specifically
> trying to set the A bit via an exception return is problematic.
> 
> If all of them work then this suggests some invalid hardware state or
> something else we don't understand, but which is cleared by the initial
> msr cpsr_c which clobbers the processor mode.

Playing with an Integrator-CP with a 1136 tile, the only way I could
cause the thing to fail was to boot the thing in SYSTEM mode.

Tony, can you possibly also try the attached patch?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: sysmode.patch --]
[-- Type: text/x-diff; name=sysmode.patch, Size: 613 bytes --]

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 683a1e6..7714ec7 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -253,6 +253,8 @@
 	mrs	\reg , cpsr
 	mov	lr , \reg
 	and	lr , lr , #MODE_MASK
+	cmp	lr , #SYSTEM_MODE	/* Yet another braindead platform? */
+	beq	omgsys
 	cmp	lr , #HYP_MODE
 	orr	\reg , \reg , #PSR_A_BIT | PSR_I_BIT | PSR_F_BIT
 	bic	\reg , \reg , #MODE_MASK
@@ -264,6 +266,7 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	__MSR_ELR_HYP(14)
 	__ERET
 1:	movs	pc, lr
+omgsys: msr	cpsr_c, \reg
 2:
 .endm
 

  reply	other threads:[~2012-10-08 11:33 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1347036934-8519-1-git-send-email-marc.zyngier@arm.com>
     [not found] ` <1347036934-8519-3-git-send-email-marc.zyngier@arm.com>
2012-10-05 20:08   ` [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode Tony Lindgren
2012-10-05 23:09     ` Russell King - ARM Linux
2012-10-05 23:23       ` Tony Lindgren
2012-10-05 23:50         ` Tony Lindgren
2012-10-06  1:32           ` Nicolas Pitre
2012-10-06  3:06             ` Tony Lindgren
2012-10-06 10:18     ` Marc Zyngier
2012-10-06 14:06       ` Nicolas Pitre
2012-10-06 14:44         ` Tony Lindgren
2012-10-06 14:47         ` Marc Zyngier
2012-10-06 14:42       ` Tony Lindgren
2012-10-06 15:32         ` Nicolas Pitre
2012-10-06 15:40           ` Tony Lindgren
2012-10-06 16:06             ` Marc Zyngier
2012-10-06 15:42           ` Russell King - ARM Linux
2012-10-06 16:00       ` Tony Lindgren
2012-10-08 11:01         ` Dave Martin
2012-10-08 11:33           ` Marc Zyngier [this message]
2012-10-08 20:36             ` Tony Lindgren
2012-10-08 11:33           ` Dave Martin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5072B9EF.1020005@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=dave.martin@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=nico@fluxnic.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).