From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Hunter Subject: Re: OMAP baseline test results for v3.7-rc4 Date: Wed, 7 Nov 2012 12:07:08 -0600 Message-ID: <509AA34C.9030203@ti.com> References: <509A96DA.2010003@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:32864 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751346Ab2KGSHN (ORCPT ); Wed, 7 Nov 2012 13:07:13 -0500 In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Paul Walmsley Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org On 11/07/2012 11:32 AM, Paul Walmsley wrote: > On Wed, 7 Nov 2012, Jon Hunter wrote: > >> On 11/04/2012 08:46 PM, Paul Walmsley wrote: >> >>> * 4460pandaes: boot fails early >>> - Appears to be due to X-loader problems here >>> - Need to note the X-loader version so we know it's broken >> >> Are you still planning to investigate this further or migrate to a new >> bootloader? > > Yes. The problem with the current boot setup is that the new > bootloader is breaking as well! :-( Ugh! > This can be seen by comparing: > > http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/20121017205513/boot/4460pandaes/4460pandaes_log.txt > > (the old bootloader) > > with > > http://www.pwsan.com/omap/testlogs/test_v3.7-rc4/20121104142910/boot/4460pandaes/4460pandaes_log.txt > > (the new bootloader) If you get chance, it would be good to test u-boot v2012.10 release, as I am using this and it is working fine. I see the "new" bootloader you are using is v2012.07 (however, I though this was working too). Weird ... > Dealing with this will require hands-on access, and unfortunately, right > now I am traveling and away from my testbed. Next week, will take a > closer look. > >> With 4460 and 3.7-rc4, I am seeing that resume from suspend is not >> working (not sure when this broke though). I am just curious if anyone >> else sees this. My u-boot version is v2012.10. > > If you have the chance, it would be useful to know if any of the v3.7-rcs > worked. Otherwise, will look at this next week. Ok, I will see if I can figure out where this broke. Cheers Jon