linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
Cc: balbi-l0cyMroinI0@public.gmane.org,
	keshava_mgowda-l0cyMroinI0@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 00/16] OMAP USB Host cleanup
Date: Mon, 19 Nov 2012 12:11:15 +0200	[thread overview]
Message-ID: <50AA05C3.7010003@ti.com> (raw)
In-Reply-To: <87fw49cnvh.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>

Kevin,

On 11/16/2012 10:08 PM, Kevin Hilman wrote:
> Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> writes:
> 
>> Hi,
>>
>> This patchset addresses the following
>>
>> - Avoid addressing clocks one by one by name and use a for loop + bunch
>>   of cleanups.
>> - Get number of channels/ports dynamically either from revision register
>>   or from platform data. Avoids getting clocks that are not present.
>> - Add OMAP5 and HSIC mode (Not tested)
>> - Save power on Panda when EHCI driver is not loaded.
>>
> 
> Seeing the clock changes/cleanups, I gave this a spin on OMAP3
> (3530/Beagle, 3530/Overo, 3730/Beagle-xM, 3730/OveroSTORM) to see if it
> fixed up the problem where CORE does not hit retention in idle when USB
> host is enabled, even with no devices attached.
> 
> Unfortunately, it didn't help. :(

oh that's bad. But this series wasn't meant to fix that ;).

I could take a look at it once I get hold of the serial cable to connect
to the beagle.

regards,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2012-11-19 10:11 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-15 14:33 [PATCH 00/16] OMAP USB Host cleanup Roger Quadros
2012-11-15 14:33 ` [PATCH 01/16] mfd: omap-usb-tll: Avoid creating copy of platform data Roger Quadros
2012-11-21 11:42   ` Felipe Balbi
2012-11-15 14:34 ` [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling Roger Quadros
2012-11-21 11:55   ` Felipe Balbi
2012-11-21 12:36     ` Roger Quadros
2012-11-21 14:03       ` Felipe Balbi
     [not found]         ` <20121121140354.GR10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 15:39           ` Roger Quadros
     [not found]             ` <50ACF5CD.9010209-l0cyMroinI0@public.gmane.org>
2012-11-21 19:39               ` Felipe Balbi
2012-11-22  8:19                 ` Roger Quadros
2012-11-15 14:34 ` [PATCH 03/16] mfd: omap-usb-tll: introduce and use mode_needs_tll() Roger Quadros
2012-11-21 11:57   ` Felipe Balbi
     [not found]     ` <20121121115705.GE10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 12:37       ` Roger Quadros
     [not found] ` <1352990054-14680-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-15 14:34   ` [PATCH 04/16] mfd: omap-usb-tll: Move port clock handling out of runtime ops Roger Quadros
     [not found]     ` <1352990054-14680-5-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 12:06       ` Felipe Balbi
2012-11-21 12:45         ` Roger Quadros
     [not found]           ` <50ACCCFA.6060605-l0cyMroinI0@public.gmane.org>
2012-11-21 14:07             ` Felipe Balbi
2012-11-15 14:34   ` [PATCH 05/16] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support Roger Quadros
     [not found]     ` <1352990054-14680-6-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 12:12       ` Felipe Balbi
     [not found]         ` <20121121121238.GG10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 12:49           ` Roger Quadros
2012-11-21 14:08             ` Felipe Balbi
2012-11-15 14:34   ` [PATCH 06/16] mfd: omap-usb-host: cleanup clock management code Roger Quadros
     [not found]     ` <1352990054-14680-7-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 13:39       ` Felipe Balbi
2012-11-26 15:14         ` Roger Quadros
     [not found]           ` <50B38765.5070901-l0cyMroinI0@public.gmane.org>
2012-11-26 20:02             ` Felipe Balbi
2012-11-27  9:41               ` Roger Quadros
2012-11-15 14:34   ` [PATCH 11/16] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode Roger Quadros
     [not found]     ` <1352990054-14680-12-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 13:54       ` Felipe Balbi
     [not found]         ` <20121121135451.GM10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 15:49           ` Roger Quadros
2012-11-15 14:34   ` [PATCH 15/16] ARM: OMAP4: omap4panda: Don't enable USB PHY clock from board Roger Quadros
2012-11-21 13:59     ` Felipe Balbi
2012-11-16 20:08   ` [PATCH 00/16] OMAP USB Host cleanup Kevin Hilman
     [not found]     ` <87fw49cnvh.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2012-11-19 10:11       ` Roger Quadros [this message]
     [not found]         ` <50AA05C3.7010003-l0cyMroinI0@public.gmane.org>
2012-11-19 23:22           ` Kevin Hilman
2012-11-20 23:13             ` Tony Lindgren
2012-11-21 10:05               ` Roger Quadros
2012-11-21 11:41                 ` Felipe Balbi
2012-11-27 14:42             ` Roger Quadros
2012-11-27 16:30               ` Felipe Balbi
     [not found]                 ` <20121127163022.GB24240-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-12-04 14:46                   ` Grazvydas Ignotas
2012-11-15 14:34 ` [PATCH 07/16] mfd: omap_usb_host: Avoid creating copy of platform_data Roger Quadros
2012-11-21 13:40   ` Felipe Balbi
2012-11-15 14:34 ` [PATCH 08/16] mfd: omap-usb-host: know about number of ports from revision register Roger Quadros
2012-11-21 13:43   ` Felipe Balbi
     [not found]     ` <20121121134300.GJ10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 14:45       ` Roger Quadros
2012-11-21 19:44         ` Felipe Balbi
2012-11-15 14:34 ` [PATCH 09/16] mfd: omap-usb-host: override number of ports from platform data Roger Quadros
     [not found]   ` <1352990054-14680-10-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 13:45     ` Felipe Balbi
2012-11-21 14:50       ` Roger Quadros
2012-11-21 19:47         ` Felipe Balbi
2012-11-15 14:34 ` [PATCH 10/16] mfd: omap-usb-host: Intialize all available ports Roger Quadros
2012-11-21 13:52   ` Felipe Balbi
2012-11-21 15:47     ` Roger Quadros
2012-11-21 19:48       ` Felipe Balbi
2012-11-27 12:10     ` Roger Quadros
2012-11-27 13:28       ` Felipe Balbi
     [not found]         ` <20121127132827.GC22556-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-27 13:39           ` Roger Quadros
2012-11-15 14:34 ` [PATCH 12/16] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk Roger Quadros
2012-11-15 14:34 ` [PATCH 13/16] mfd: omap-usb-host: Get rid of unnecessary spinlock Roger Quadros
     [not found]   ` <1352990054-14680-14-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 13:57     ` Felipe Balbi
     [not found]       ` <20121121135732.GN10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 15:55         ` Roger Quadros
2012-11-21 19:50           ` Felipe Balbi
2012-11-15 14:34 ` [PATCH 14/16] mfd: omap-usb-host: Support an auxiliary clock per port Roger Quadros
     [not found]   ` <1352990054-14680-15-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2012-11-21 13:58     ` Felipe Balbi
     [not found]       ` <20121121135841.GO10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 16:00         ` Roger Quadros
2012-11-15 14:34 ` [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use Roger Quadros
2012-11-21 14:00   ` Felipe Balbi
     [not found]     ` <20121121140044.GQ10216-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-21 14:52       ` Alan Stern
2012-11-21 15:13         ` Roger Quadros
     [not found]           ` <50ACEFA5.4080104-l0cyMroinI0@public.gmane.org>
2012-11-21 15:32             ` Alan Stern
     [not found]               ` <Pine.LNX.4.44L0.1211211028200.1731-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2012-11-21 16:07                 ` Roger Quadros
2012-11-21 19:54                   ` Felipe Balbi
     [not found]                     ` <20121121195436.GF14290-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-22  1:13                       ` Andy Green
2012-11-22 12:21                         ` Felipe Balbi
     [not found]                           ` <20121122121845.GB18022-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-22 13:49                             ` Andy Green
2012-11-22 13:56                               ` Felipe Balbi
     [not found]                                 ` <20121122135603.GA20066-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-22 15:00                                   ` Roger Quadros
     [not found]                                     ` <50AE3E1D.9000607-l0cyMroinI0@public.gmane.org>
2012-11-22 16:12                                       ` Felipe Balbi
     [not found]                                         ` <20121122161228.GB20665-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-23 10:23                                           ` Roger Quadros
     [not found]                                             ` <50AF4EB8.9010800-l0cyMroinI0@public.gmane.org>
2012-11-23 10:44                                               ` Felipe Balbi
     [not found]                                                 ` <20121123104416.GD29585-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-23 16:25                                                   ` Alan Stern
2012-11-23 20:37                                                     ` Andy Green
2012-11-24 15:38                                                       ` Alan Stern
     [not found]                                                         ` <Pine.LNX.4.44L0.1211241032490.4291-100000-pYrvlCTfrz9XsRXLowluHWD2FQJk+8+b@public.gmane.org>
2012-11-24 22:00                                                           ` Andy Green
     [not found]                                                             ` <50B14395.4010404-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-11-25  0:41                                                               ` Alan Stern
2012-11-22 17:36                                 ` Alan Stern
2012-11-22 17:53                                   ` Felipe Balbi
     [not found]                                     ` <20121122175340.GA22614-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-22 18:32                                       ` Alan Stern
2012-11-22 20:15                                         ` Felipe Balbi
2012-11-23  2:35                                           ` Alan Stern
2012-11-23 10:38                                             ` Felipe Balbi
     [not found]                                               ` <20121123103817.GC29585-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-11-23 16:27                                                 ` Alan Stern
2012-11-26  8:52                                                   ` Felipe Balbi
     [not found]                                   ` <Pine.LNX.4.44L0.1211221226360.2255-100000-pYrvlCTfrz9XsRXLowluHWD2FQJk+8+b@public.gmane.org>
2012-11-23  0:19                                     ` Andy Green

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50AA05C3.7010003@ti.com \
    --to=rogerq-l0cymroini0@public.gmane.org \
    --cc=balbi-l0cyMroinI0@public.gmane.org \
    --cc=keshava_mgowda-l0cyMroinI0@public.gmane.org \
    --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).