[PATCH 0/3] ARM: OMAP4: Clock fixes

[PATCH 0/3] ARM: OMAP4: Clock fixes

[Jon Hunter]

Fixes included, fixing up timer clock aliases for v3.8 and working
around ABE DPLL issue seen with latest u-boot bootloader (v2012.10).

Testing includes:
- Boot testing on OMAP3430 Beagle, OMAP4430 Panda and OMAP4460 Panda
- Boot tested with device-tree on OMAP4430 Panda and OMAP4460 Panda
  and validated that all timers are working.
- Suspend testing on OMAP3430 Beagle and OMAP4430 Panda (suspend not
  functional on OMAP4460 Panda prior to this series and so could not
  be tested).
- Core retention validated on OMAP3430 Beagle.

Jon Hunter (3):
  ARM: OMAP4: Update timer clock aliases
  ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
  ARM: OMAP4460: Workaround ABE DPLL failing to turn-on

 arch/arm/mach-omap2/clock44xx_data.c    |   32 ++++++++++++++--
 arch/arm/mach-omap2/dpll3xxx.c          |   46 +++++++++++++++-------
 arch/arm/mach-omap2/dpll44xx.c          |   63 ++++++++++++++++++++++++++-----
 arch/arm/plat-omap/include/plat/clock.h |   10 +++++
 4 files changed, 124 insertions(+), 27 deletions(-)

-- 
1.7.9.5

[PATCH 1/3] ARM: OMAP4: Update timer clock aliases

[Jon Hunter]

Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
names of the OMAP4 timers 5-7 because the default address for the timers
was changed from the L3 address to the MPU private address. When booting
with device-tree, this introduces a regression when attempting to set
the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
the clock aliases for timer 5-7 to reflect the updated device-tree name
for the timers.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
This change is needed for v3.8 as the patch [1] to update the default
timer addresses is queued for that release.

[1] http://marc.info/?l=linux-omap&m=135178500008690&w=2

 arch/arm/mach-omap2/clock44xx_data.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c..8f197eb 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3341,10 +3341,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
-- 
1.7.9.5

[PATCH 2/3] ARM: OMAP4: Enhance support for DPLLs with 4X multiplier

[Jon Hunter]

On OMAP4 devices, the ABE DPLL has an internal 4X multiplier that can
be enabled or disabled in addition to the standard configurable
multiplier (M) for OMAP DPLLs. When configuring the ABE DPLL the 4X
multiplier is accounted for by checking to see whether it is enabled or
not. However, when calculating a new rate we only check to see if the
rate can be achieved with the current setting for the 4X multiplier.
Enhance the round_rate() function for such DPLLs to see if the rate
can be achieved with the 4X multiplier if it cannot be achieved without
the 4X multiplier.

This change is necessary, because when using the 32kHz clock as the
source clock for the ABE DPLL, the default DPLL frequency for the ABE
DPLL cannot be achieved without enabling the 4X multiplier.

When using the 32kHz clock as the source clock for the ABE DPLL and
attempting to lock the DPLL to 98.304MHz (default frequency), it was
found that the DPLL would fail to lock if the low-power mode for the DPLL
was not enabled. From reviewing boot-loader settings that configure the
ABE DPLL it was found that the low-power mode is enabled when using the
32kHz clock source, however, the documentation for OMAP does not state
that this is a requirement. Therefore, introduce a new function for
OMAP4 devices to see if low-power mode can be enabled when calculating a
new rate to ensure the DPLL will lock.

New variables for the last calculated 4X multiplier and low-power
setting have been added to the dpll data structure as well as variables
defining the bit mask for enabling these features via the DPLL's
control_reg. It is possible that we could eliminate these bit masks from
the dpll data structure as these bit masks are not unique to OMAP4, if
it is preferred.

The function omap3_noncore_program_dpll() has been updated to avoid
passing the calculated values for the multiplier (M) and divider (N) as
these are stored in the clk structure.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/clock44xx_data.c    |    2 +
 arch/arm/mach-omap2/dpll3xxx.c          |   46 +++++++++++++++-------
 arch/arm/mach-omap2/dpll44xx.c          |   63 ++++++++++++++++++++++++++-----
 arch/arm/plat-omap/include/plat/clock.h |   10 +++++
 4 files changed, 98 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 8f197eb..8a9cbad 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -226,6 +226,8 @@ static struct dpll_data dpll_abe_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.m4xen_mask	= OMAP4430_DPLL_REGM4XEN_MASK,
+	.lpmode_mask	= OMAP4430_DPLL_LPMODE_EN_MASK,
 	.max_multiplier	= 2047,
 	.max_divider	= 128,
 	.min_divider	= 1,
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 814e180..8a0259e 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -17,7 +17,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/list.h>
@@ -292,15 +291,13 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
 
 /*
  * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
+ * @clk:	struct clk * of DPLL to set
+ * @freqsel:	FREQSEL value to set
  *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
  */
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+static int omap3_noncore_dpll_program(struct clk *clk, u16 freqsel)
 {
 	struct dpll_data *dd = clk->dpll_data;
 	u8 dco, sd_div;
@@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 	/* Set DPLL multiplier, divider */
 	v = __raw_readl(dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
+	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
 
 	/* Configure dco and sd_div for dplls that have these fields */
 	if (dd->dco_mask) {
-		_lookup_dco(clk, &dco, m, n);
+		_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
 		v &= ~(dd->dco_mask);
 		v |= dco << __ffs(dd->dco_mask);
 	}
 	if (dd->sddiv_mask) {
-		_lookup_sddiv(clk, &sd_div, m, n);
+		_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+			      dd->last_rounded_n);
 		v &= ~(dd->sddiv_mask);
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
 	__raw_writel(v, dd->mult_div1_reg);
 
+	/* Set 4X multiplier and low-power mode */
+	if (dd->m4xen_mask || dd->lpmode_mask) {
+		v = __raw_readl(dd->control_reg);
+
+		if (dd->m4xen_mask) {
+			if (dd->last_rounded_m4xen)
+				v |= dd->m4xen_mask;
+			else
+				v &= ~dd->m4xen_mask;
+		}
+
+		if (dd->lpmode_mask) {
+			if (dd->last_rounded_lpmode)
+				v |= dd->lpmode_mask;
+			else
+				v &= ~dd->lpmode_mask;
+		}
+
+		__raw_writel(v, dd->control_reg);
+	}
+
 	/* We let the clock framework set the other output dividers later */
 
 	/* REVISIT: Set ramp-up delay? */
@@ -487,8 +506,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
 			 __clk_get_name(clk), rate);
 
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
+		ret = omap3_noncore_dpll_program(clk, freqsel);
 		if (!ret)
 			new_parent = dd->clk_ref;
 	}
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 09d0ccc..8c40780 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -22,6 +22,15 @@
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
 
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX	1000000
+#define OMAP4_DPLL_LP_FOUT_MAX	100000000
+
 /* Supported only on OMAP4 */
 int omap4_dpllmx_gatectrl_read(struct clk *clk)
 {
@@ -84,6 +93,31 @@ const struct clkops clkops_omap4_dpllmx_ops = {
 };
 
 /**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+	long fint, fout;
+
+	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+	fout = fint * dd->last_rounded_m;
+
+	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+		dd->last_rounded_lpmode = 1;
+	else
+		dd->last_rounded_lpmode = 0;
+}
+
+/**
  * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
  * @clk: struct clk * of the DPLL to compute the rate for
  *
@@ -127,7 +161,6 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
  */
 long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	u32 v;
 	struct dpll_data *dd;
 	long r;
 
@@ -136,18 +169,30 @@ long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd = clk->dpll_data;
 
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
-
-	if (v)
-		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_m4xen = 0;
 
+	/*
+	 * First try to compute the DPLL configuration for
+	 * target rate without using the 4X multiplier.
+	 */
 	r = omap2_dpll_round_rate(clk, target_rate);
+	if (r != ~0)
+		goto out;
+
+	/*
+	 * If we did not find a valid DPLL configuration, try again, but
+	 * this time see if using the 4X multiplier can help. Enabling the
+	 * 4X multiplier is equivalent to dividing the target rate by 4.
+	 */
+	r = omap2_dpll_round_rate(clk, target_rate / OMAP4430_REGM4XEN_MULT);
 	if (r == ~0)
 		return r;
 
-	if (v)
-		clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_m4xen = 1;
+
+out:
+	omap4_dpll_lpmode_recalc(dd);
 
-	return clk->dpll_data->last_rounded_rate;
+	return dd->last_rounded_rate;
 }
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index e2e2d04..16654a3 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -118,6 +118,10 @@ struct clksel {
  * @enable_mask: mask of the DPLL mode bitfield in @control_reg
  * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
  * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
  * @max_multiplier: maximum valid non-bypass multiplier value (actual)
  * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
  * @min_divider: minimum valid non-bypass divider value (actual)
@@ -128,6 +132,8 @@ struct clksel {
  * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
  * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
  * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
  * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
  * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
  * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
@@ -156,6 +162,8 @@ struct dpll_data {
 	u32			enable_mask;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
 	u16			max_multiplier;
 	u8			last_rounded_n;
 	u8			min_divider;
@@ -168,6 +176,8 @@ struct dpll_data {
 	u32			idlest_mask;
 	u32			dco_mask;
 	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-- 
1.7.9.5

[PATCH 3/3] ARM: OMAP4460: Workaround ABE DPLL failing to turn-on

[Jon Hunter]

With the latest mainline u-boot bootloader (v2012.10), timers (5-8) in
the ABE power domain are failing to turn-on. The timers never come out
of the disabled state when setting the module-mode field to enable.

The problem was exposed when u-boot was updated to NOT configure and
lock the ABE DPLL on start-up. If the ABE DPLL is configured and locked
by u-boot the problem does not occur. However, if the ABE DPLL is in the
idle low-power bypass state and we attempt to enable a timer in the ABE
power domain, it remains stuck in the disabled state. It appears to be a
problem the timer interface clock as this comes from the ABE DPLL.

If we place the ABE DPLL in the MN-bypass state and not the idle
low-power state, then this problem is not seen.

This problem only appears to occur on OMAP4460 and not OMAP4430.

Workaround this problem by locking the ABE DPLL for OMAP4460 in the
kernel on boot. By locking the ABE DPLL, when clocks from the ABE DPLL
are not being requested the DPLL will transition into a low-power stop
mode.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/clock44xx_data.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 8a9cbad..1844661 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -46,6 +46,14 @@
 #define OMAP4430_MODULEMODE_HWCTRL			0
 #define OMAP4430_MODULEMODE_SWCTRL			1
 
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ				98304000
+
 /* Root clocks */
 
 static struct clk extalt_clkin_ck = {
@@ -3354,6 +3362,7 @@ int __init omap4xxx_clk_init(void)
 {
 	struct omap_clk *c;
 	u32 cpu_clkflg;
+	int rc;
 
 	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
@@ -3400,5 +3409,18 @@ int __init omap4xxx_clk_init(void)
 	 */
 	clk_enable_init_clocks();
 
+	/*
+	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+	 * state when turning the ABE clock domain. Workaround this by
+	 * locking the ABE DPLL on boot.
+	 */
+	if (cpu_is_omap446x()) {
+		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+		if (!rc)
+			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+		if (rc)
+			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+	}
+
 	return 0;
 }
-- 
1.7.9.5

Re: [PATCH 1/3] ARM: OMAP4: Update timer clock aliases

[Paul Walmsley]

Hi Jon,

On Wed, 7 Nov 2012, Jon Hunter wrote:

> Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
> names of the OMAP4 timers 5-7 because the default address for the timers
> was changed from the L3 address to the MPU private address. When booting
> with device-tree, this introduces a regression when attempting to set
> the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
> the clock aliases for timer 5-7 to reflect the updated device-tree name
> for the timers.

Reviewing my E-mail inbox, just saw that this one is marked as being 
needed for v3.8.  Is that still the case?  If so, we should ask Tony to 
take an updated version of this patch, given the recent CCF conversion.

Following is the updated patch.


- Paul

From: Jon Hunter <jon-hunter@ti.com>
Date: Thu, 29 Nov 2012 03:47:46 -0700
Subject: [PATCH] ARM: OMAP4: Update timer clock aliases

Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
names of the OMAP4 timers 5-7 because the default address for the timers
was changed from the L3 address to the MPU private address. When booting
with device-tree, this introduces a regression when attempting to set
the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
the clock aliases for timer 5-7 to reflect the updated device-tree name
for the timers.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: updated to apply after the CCF conversion]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/cclock44xx_data.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index aa56c3e..a1f0b55 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -1935,10 +1935,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
-- 
1.7.10.4

Re: [PATCH 0/3] ARM: OMAP4: Clock fixes

[Paul Walmsley]

Hi Jon,

On Wed, 7 Nov 2012, Jon Hunter wrote:

> Fixes included, fixing up timer clock aliases for v3.8 and working
> around ABE DPLL issue seen with latest u-boot bootloader (v2012.10).
> 
> Testing includes:
> - Boot testing on OMAP3430 Beagle, OMAP4430 Panda and OMAP4460 Panda
> - Boot tested with device-tree on OMAP4430 Panda and OMAP4460 Panda
>   and validated that all timers are working.
> - Suspend testing on OMAP3430 Beagle and OMAP4430 Panda (suspend not
>   functional on OMAP4460 Panda prior to this series and so could not
>   be tested).
> - Core retention validated on OMAP3430 Beagle.
> 
> Jon Hunter (3):
>   ARM: OMAP4: Update timer clock aliases
>   ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
>   ARM: OMAP4460: Workaround ABE DPLL failing to turn-on

So I'd plan to queue #2 and #3 for v3.8-rc1.  But they need to be updated 
after the common clock framework conversion.  Could you update those to 
apply on the arm-soc for-next branch?
 

- Paul

Re: [PATCH 1/3] ARM: OMAP4: Update timer clock aliases

[Jon Hunter]

On 11/29/2012 04:53 AM, Paul Walmsley wrote:
> Hi Jon,
> 
> On Wed, 7 Nov 2012, Jon Hunter wrote:
> 
>> Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
>> names of the OMAP4 timers 5-7 because the default address for the timers
>> was changed from the L3 address to the MPU private address. When booting
>> with device-tree, this introduces a regression when attempting to set
>> the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
>> the clock aliases for timer 5-7 to reflect the updated device-tree name
>> for the timers.
> 
> Reviewing my E-mail inbox, just saw that this one is marked as being 
> needed for v3.8.  Is that still the case?  If so, we should ask Tony to 
> take an updated version of this patch, given the recent CCF conversion.

Yes this is still needed for v3.8.

> Following is the updated patch.

Thanks, looks good to me.

Cheers
Jon

> 
> - Paul
> 
> From: Jon Hunter <jon-hunter@ti.com>
> Date: Thu, 29 Nov 2012 03:47:46 -0700
> Subject: [PATCH] ARM: OMAP4: Update timer clock aliases
> 
> Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
> names of the OMAP4 timers 5-7 because the default address for the timers
> was changed from the L3 address to the MPU private address. When booting
> with device-tree, this introduces a regression when attempting to set
> the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
> the clock aliases for timer 5-7 to reflect the updated device-tree name
> for the timers.
> 
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> [paul@pwsan.com: updated to apply after the CCF conversion]
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> ---
>  arch/arm/mach-omap2/cclock44xx_data.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
> index aa56c3e..a1f0b55 100644
> --- a/arch/arm/mach-omap2/cclock44xx_data.c
> +++ b/arch/arm/mach-omap2/cclock44xx_data.c
> @@ -1935,10 +1935,10 @@ static struct omap_clk omap44xx_clks[] = {
>  	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
>  	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
>  	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
> -	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> -	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> -	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> -	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> +	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> +	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> +	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
> +	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
>  	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
>  };
>  
> 

Re: [PATCH 0/3] ARM: OMAP4: Clock fixes

[Jon Hunter]

On 11/29/2012 05:21 AM, Paul Walmsley wrote:
> Hi Jon,
> 
> On Wed, 7 Nov 2012, Jon Hunter wrote:
> 
>> Fixes included, fixing up timer clock aliases for v3.8 and working
>> around ABE DPLL issue seen with latest u-boot bootloader (v2012.10).
>>
>> Testing includes:
>> - Boot testing on OMAP3430 Beagle, OMAP4430 Panda and OMAP4460 Panda
>> - Boot tested with device-tree on OMAP4430 Panda and OMAP4460 Panda
>>   and validated that all timers are working.
>> - Suspend testing on OMAP3430 Beagle and OMAP4430 Panda (suspend not
>>   functional on OMAP4460 Panda prior to this series and so could not
>>   be tested).
>> - Core retention validated on OMAP3430 Beagle.
>>
>> Jon Hunter (3):
>>   ARM: OMAP4: Update timer clock aliases
>>   ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
>>   ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
> 
> So I'd plan to queue #2 and #3 for v3.8-rc1.  But they need to be updated 
> after the common clock framework conversion.  Could you update those to 
> apply on the arm-soc for-next branch?

Yes no problem.

Cheers
Jon