From: Jack Mitchell <ml@communistcode.co.uk>
To: "Jan Lübbe" <jlu@pengutronix.de>
Cc: Ben Gamari <bgamari.foss@gmail.com>,
balbi@ti.com, linux-omap@vger.kernel.org
Subject: Re: AM335x BeagleBone SPI Issues
Date: Fri, 04 Jan 2013 16:21:50 +0000 [thread overview]
Message-ID: <50E7019E.5090109@communistcode.co.uk> (raw)
In-Reply-To: <1357310801.23039.24.camel@coredoba.hi.pengutronix.de>
On 04/01/13 14:46, Jan Lübbe wrote:
> Hi,
>
> On Tue, 2012-12-11 at 17:02 +0000, Jack Mitchell wrote:
>> On 11/12/12 16:24, Jack Mitchell wrote:
>>> On 11/12/12 15:22, Ben Gamari wrote:
>>>> Jack Mitchell <ml@communistcode.co.uk> writes:
>>>>> Thank you, the reordering dma patch fixed the dma issue I was having!
>>>>> However, the bad news, I now get the same results for the dma and
>>>>> non-dma spidev test. While the scope shows the SPI clk and data is
>>>>> fine,
>>>>> the reading from the program still shows 0x00 for all words.
>>>>>
>>>> Just to make sure this has been thought of: I've seen this sort of
>>>> behavior in the past when the CLK pin wasn't configured as an input.
> *snip*
>
>> My bad! The jumper bridge had come loose, it works now! Yippee!
>>
>> root@beaglebone:~# ./spidev -D /dev/spidev2.0
>> spi mode: 0
>> bits per word: 16
>> max speed: 24000000 Hz (24000 KHz)
>>
>> FF FF FF FF FF FF
>> 40 00 00 00 00 95
>> FF FF FF FF FF FF
>> FF FF FF FF FF FF
>> FF FF FF FF FF FF
>> DE AD BE EF BA AD
>> F0 0D
>> root@beaglebone:~#
>>
>> Thanks everyone, and do I need to submit any patches to clear this all up?
>>
>> Currently all I see is changing the clk pins from output to input (if
>> this is a valid change?).
> I just stumbled over the same problem and have not seen any patch for
> this fix. Have I missed something or should I send a patch? Which would
> be the correct base for such a patch?
>
> Regards,
> Jan
I didn't submit a patch for this but easily could. I was confused about
what tree to base it against as at the time (may still be the same) DT
SPI for AM335x was not in a mainline tree. I hoped someone would pick it
up when posting DT SPI for mainline....
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-01-04 16:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-10 13:23 AM335x BeagleBone SPI Issues Jack Mitchell
2012-12-10 13:53 ` Felipe Balbi
2012-12-10 14:50 ` Jack Mitchell
2012-12-10 14:59 ` Felipe Balbi
2012-12-10 15:19 ` Jack Mitchell
2012-12-10 15:26 ` Shubhrajyoti Datta
2012-12-10 16:18 ` Jack Mitchell
2012-12-10 18:35 ` Felipe Balbi
2012-12-11 6:39 ` Shubhrajyoti Datta
2012-12-11 10:17 ` Jack Mitchell
2012-12-11 10:20 ` Felipe Balbi
2012-12-11 10:38 ` Jack Mitchell
2012-12-11 11:48 ` Felipe Balbi
2012-12-11 14:27 ` Felipe Balbi
2012-12-11 15:23 ` Jack Mitchell
2012-12-11 16:15 ` Felipe Balbi
2012-12-11 15:22 ` Ben Gamari
2012-12-11 16:24 ` Jack Mitchell
2012-12-11 16:36 ` Jack Mitchell
2012-12-11 17:02 ` Jack Mitchell
2013-01-04 14:46 ` Jan Lübbe
2013-01-04 16:21 ` Jack Mitchell [this message]
2013-01-04 16:36 ` Jack Mitchell
2012-12-11 17:03 ` Felipe Balbi
2012-12-11 17:52 ` Felipe Balbi
2012-12-12 8:07 ` Felipe Balbi
-- strict thread matches above, loose matches on Subject: below --
2012-12-10 13:17 Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E7019E.5090109@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=balbi@ti.com \
--cc=bgamari.foss@gmail.com \
--cc=jlu@pengutronix.de \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).