From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lgirdwood@gmail.com>,
alsa-devel@alsa-project.org, linux-omap@vger.kernel.org,
Jarkko Nikula <jarkko.nikula@bitmer.com>
Subject: Re: [alsa-devel] [PATCH] ASoC: omap: Call omap_mcbsp_set_threshold() from mcbsp hw_params
Date: Tue, 26 Mar 2013 10:25:12 +0100 [thread overview]
Message-ID: <51516978.60902@ti.com> (raw)
In-Reply-To: <1364227096-12232-1-git-send-email-lars@metafoo.de>
Hi,
On 03/25/2013 04:58 PM, Lars-Peter Clausen wrote:
> The omap PCM driver provides a set_threshold callback which gets called by the
> PCM driver when either playback or capture is started. The only DAI driver which
> sets this callback is the mcbsp driver. This patch removes the callback from the
> PCM driver and moves the invocation of the omap_mcbsp_set_threshold() function
> to the mcbsp hw_params callback since this is the only place where the threshold
> size can change. Doing so allows us to use the default dmaengine PCM trigger
> callback in the omap PCM driver.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
>
> ---
> Only compile tested, but I don't see why it should not work
Looks good and it also works. My only concern was with this on how I'm going
to handle the upcoming OMAP4/5 AESS/ABE support since there we need to set
custom McBSP threshold...
But looking at the non upstream code I think I can handle things just fine
with this change as well.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> sound/soc/omap/omap-mcbsp.c | 12 +++++-------
> sound/soc/omap/omap-pcm.c | 33 +--------------------------------
> sound/soc/omap/omap-pcm.h | 1 -
> 3 files changed, 6 insertions(+), 40 deletions(-)
>
> diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
> index 8d2defd..406fc87 100644
> --- a/sound/soc/omap/omap-mcbsp.c
> +++ b/sound/soc/omap/omap-mcbsp.c
> @@ -62,24 +62,22 @@ enum {
> * Stream DMA parameters. DMA request line and port address are set runtime
> * since they are different between OMAP1 and later OMAPs
> */
> -static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
> +static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream,
> + unsigned int packet_size)
> {
> struct snd_soc_pcm_runtime *rtd = substream->private_data;
> struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
> - struct omap_pcm_dma_data *dma_data;
> int words;
>
> - dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
> -
> /*
> * Configure McBSP threshold based on either:
> * packet_size, when the sDMA is in packet mode, or based on the
> * period size in THRESHOLD mode, otherwise use McBSP threshold = 1
> * for mono streams.
> */
> - if (dma_data->packet_size)
> - words = dma_data->packet_size;
> + if (packet_size)
> + words = packet_size;
> else
> words = 1;
>
> @@ -245,7 +243,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
> return -EINVAL;
> }
> if (mcbsp->pdata->buffer_size) {
> - dma_data->set_threshold = omap_mcbsp_set_threshold;
> if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
> int period_words, max_thrsh;
> int divider = 0;
> @@ -276,6 +273,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
> /* Use packet mode for non mono streams */
> pkt_size = channels;
> }
> + omap_mcbsp_set_threshold(substream, pkt_size);
> }
>
> dma_data->packet_size = pkt_size;
> diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
> index c722c2e..1626fb7 100644
> --- a/sound/soc/omap/omap-pcm.c
> +++ b/sound/soc/omap/omap-pcm.c
> @@ -129,37 +129,6 @@ static int omap_pcm_hw_free(struct snd_pcm_substream *substream)
> return 0;
> }
>
> -static int omap_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - struct snd_soc_pcm_runtime *rtd = substream->private_data;
> - struct omap_pcm_dma_data *dma_data;
> - int ret = 0;
> -
> - dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
> -
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - case SNDRV_PCM_TRIGGER_RESUME:
> - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> - /* Configure McBSP internal buffer usage */
> - if (dma_data->set_threshold)
> - dma_data->set_threshold(substream);
> - break;
> -
> - case SNDRV_PCM_TRIGGER_STOP:
> - case SNDRV_PCM_TRIGGER_SUSPEND:
> - case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> - break;
> - default:
> - ret = -EINVAL;
> - }
> -
> - if (ret == 0)
> - ret = snd_dmaengine_pcm_trigger(substream, cmd);
> -
> - return ret;
> -}
> -
> static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
> {
> snd_pcm_uframes_t offset;
> @@ -208,7 +177,7 @@ static struct snd_pcm_ops omap_pcm_ops = {
> .ioctl = snd_pcm_lib_ioctl,
> .hw_params = omap_pcm_hw_params,
> .hw_free = omap_pcm_hw_free,
> - .trigger = omap_pcm_trigger,
> + .trigger = snd_dmaengine_pcm_trigger,
> .pointer = omap_pcm_pointer,
> .mmap = omap_pcm_mmap,
> };
> diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h
> index cabe74c..39e6e45 100644
> --- a/sound/soc/omap/omap-pcm.h
> +++ b/sound/soc/omap/omap-pcm.h
> @@ -31,7 +31,6 @@ struct omap_pcm_dma_data {
> char *name; /* stream identifier */
> int dma_req; /* DMA request line */
> unsigned long port_addr; /* transmit/receive register */
> - void (*set_threshold)(struct snd_pcm_substream *substream);
> int data_type; /* 8, 16, 32 (bits) or 0 to let omap-pcm
> * to decide the sDMA data type */
> int packet_size; /* packet size only in PACKET mode */
>
next prev parent reply other threads:[~2013-03-26 9:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 15:58 [PATCH] ASoC: omap: Call omap_mcbsp_set_threshold() from mcbsp hw_params Lars-Peter Clausen
2013-03-26 9:25 ` Peter Ujfalusi [this message]
2013-03-26 14:11 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51516978.60902@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jarkko.nikula@bitmer.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).