From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Murphy Subject: Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS Date: Thu, 18 Apr 2013 13:31:11 -0500 Message-ID: <51703BEF.6050804@ti.com> References: <1366229760-4808-1-git-send-email-dmurphy@ti.com> <516FBD18.3060501@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <516FBD18.3060501@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: =?ISO-8859-1?Q?Vincent_Stehl=E9?= Cc: b-cousson@ti.com, tony@atomide.com, linux@arm.linux.org.uk, linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-omap@vger.kernel.org On 04/18/2013 04:30 AM, Vincent Stehl=E9 wrote: > On 04/17/2013 10:16 PM, Dan Murphy wrote: >> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda= -es >> are different. > (..) >> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/bo= ot/dts/omap4-panda-common.dtsi >> index 03bd60d..0c48f6b 100644 >> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi >> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi > (..) >> @@ -135,6 +136,25 @@ >> 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ >> >; >> }; >> + >> + led_gpio_pins: pinmux_leds_pins { >> + pinctrl-single,pins =3D < >> + >; >> + }; >> +}; > Hi, > > FYI, there was a recent discussion precisely on this topic, where Tom= y > suggested to remove the empty section: > http://marc.info/?l=3Dlinux-omap&m=3D136546635409232&w=3D2 > > Apart from that, I just tested your patch on top of Tomy's > omap-for-v3.10/dt branch and it is working fine for me on PandaBoards > EA3, A4 and ES. > > Tested-by: Vincent Stehl=E9 > > Best regards, > > V. > Thanks for testing Vincent Is there a way to append the data to an already existing node? I do not see a clean way. Dan --=20 ---------------------------------------------- Dan Murphy