* [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
@ 2013-04-17 23:23 Suman Anna
2013-04-17 23:56 ` Jon Hunter
0 siblings, 1 reply; 4+ messages in thread
From: Suman Anna @ 2013-04-17 23:23 UTC (permalink / raw)
To: Benoit Cousson; +Cc: Tony Lindgren, linux-omap, Jon Hunter, Suman Anna
OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
The PWM capability property is missing from the node definitions of
couple of timers, and this has been fixed.
Signed-off-by: Suman Anna <s-anna@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 790bb2a..0d155f5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -422,6 +422,7 @@
interrupts = <0 41 0x4>;
ti,hwmods = "timer5";
ti,timer-dsp;
+ ti,timer-pwm;
};
timer6: timer@4013a000 {
@@ -458,6 +459,7 @@
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
+ ti,timer-pwm;
};
timer10: timer@48086000 {
@@ -465,6 +467,7 @@
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
+ ti,timer-pwm;
};
timer11: timer@48088000 {
--
1.8.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
2013-04-17 23:23 [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it Suman Anna
@ 2013-04-17 23:56 ` Jon Hunter
2013-05-31 22:17 ` Anna, Suman
0 siblings, 1 reply; 4+ messages in thread
From: Jon Hunter @ 2013-04-17 23:56 UTC (permalink / raw)
To: Suman Anna
Cc: Benoit Cousson, Tony Lindgren, linux-omap,
linux-arm-kernel@lists.infradead.org, device-tree
On 04/17/2013 06:23 PM, Suman Anna wrote:
> OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
> The PWM capability property is missing from the node definitions of
> couple of timers, and this has been fixed.
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> ---
> arch/arm/boot/dts/omap5.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 790bb2a..0d155f5 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -422,6 +422,7 @@
> interrupts = <0 41 0x4>;
> ti,hwmods = "timer5";
> ti,timer-dsp;
> + ti,timer-pwm;
> };
>
> timer6: timer@4013a000 {
> @@ -458,6 +459,7 @@
> reg = <0x4803e000 0x80>;
> interrupts = <0 45 0x4>;
> ti,hwmods = "timer9";
> + ti,timer-pwm;
> };
>
> timer10: timer@48086000 {
> @@ -465,6 +467,7 @@
> reg = <0x48086000 0x80>;
> interrupts = <0 46 0x4>;
> ti,hwmods = "timer10";
> + ti,timer-pwm;
> };
>
> timer11: timer@48088000 {
Make sure you copy the linux-arm and device-tree mailing lists.
Acked-by: Jon Hunter <jon-hunter@ti.com>
Thanks!
Jon
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
2013-04-17 23:56 ` Jon Hunter
@ 2013-05-31 22:17 ` Anna, Suman
2013-06-03 12:55 ` Benoit Cousson
0 siblings, 1 reply; 4+ messages in thread
From: Anna, Suman @ 2013-05-31 22:17 UTC (permalink / raw)
To: Cousson, Benoit, Tony Lindgren
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
device-tree
Benoit, Tony,
> On 04/17/2013 06:23 PM, Suman Anna wrote:
> > OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
> > The PWM capability property is missing from the node definitions of
> > couple of timers, and this has been fixed.
> >
> > Signed-off-by: Suman Anna <s-anna@ti.com>
> > ---
> > arch/arm/boot/dts/omap5.dtsi | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> > index 790bb2a..0d155f5 100644
> > --- a/arch/arm/boot/dts/omap5.dtsi
> > +++ b/arch/arm/boot/dts/omap5.dtsi
> > @@ -422,6 +422,7 @@
> > interrupts = <0 41 0x4>;
> > ti,hwmods = "timer5";
> > ti,timer-dsp;
> > + ti,timer-pwm;
> > };
> >
> > timer6: timer@4013a000 {
> > @@ -458,6 +459,7 @@
> > reg = <0x4803e000 0x80>;
> > interrupts = <0 45 0x4>;
> > ti,hwmods = "timer9";
> > + ti,timer-pwm;
> > };
> >
> > timer10: timer@48086000 {
> > @@ -465,6 +467,7 @@
> > reg = <0x48086000 0x80>;
> > interrupts = <0 46 0x4>;
> > ti,hwmods = "timer10";
> > + ti,timer-pwm;
> > };
> >
> > timer11: timer@48088000 {
>
> Make sure you copy the linux-arm and device-tree mailing lists.
>
> Acked-by: Jon Hunter <jon-hunter@ti.com>
>
Can you include this patch in your next fixes pull request (if you haven't
already done so)? The other patch in the series is a feature change, but
this is a fix, and can go into 3.10 itself.
Regards
Suman
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
2013-05-31 22:17 ` Anna, Suman
@ 2013-06-03 12:55 ` Benoit Cousson
0 siblings, 0 replies; 4+ messages in thread
From: Benoit Cousson @ 2013-06-03 12:55 UTC (permalink / raw)
To: Anna, Suman, Tony Lindgren
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
device-tree
Hi Suman,
On 06/01/2013 12:17 AM, Anna, Suman wrote:
> Benoit, Tony,
>
>> On 04/17/2013 06:23 PM, Suman Anna wrote:
>>> OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
>>> The PWM capability property is missing from the node definitions of
>>> couple of timers, and this has been fixed.
>>>
>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>> ---
>>> arch/arm/boot/dts/omap5.dtsi | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>>> index 790bb2a..0d155f5 100644
>>> --- a/arch/arm/boot/dts/omap5.dtsi
>>> +++ b/arch/arm/boot/dts/omap5.dtsi
>>> @@ -422,6 +422,7 @@
>>> interrupts = <0 41 0x4>;
>>> ti,hwmods = "timer5";
>>> ti,timer-dsp;
>>> + ti,timer-pwm;
>>> };
>>>
>>> timer6: timer@4013a000 {
>>> @@ -458,6 +459,7 @@
>>> reg = <0x4803e000 0x80>;
>>> interrupts = <0 45 0x4>;
>>> ti,hwmods = "timer9";
>>> + ti,timer-pwm;
>>> };
>>>
>>> timer10: timer@48086000 {
>>> @@ -465,6 +467,7 @@
>>> reg = <0x48086000 0x80>;
>>> interrupts = <0 46 0x4>;
>>> ti,hwmods = "timer10";
>>> + ti,timer-pwm;
>>> };
>>>
>>> timer11: timer@48088000 {
>>
>> Make sure you copy the linux-arm and device-tree mailing lists.
>>
>> Acked-by: Jon Hunter <jon-hunter@ti.com>
>>
>
> Can you include this patch in your next fixes pull request (if you haven't
> already done so)? The other patch in the series is a feature change, but
> this is a fix, and can go into 3.10 itself.
I've just sent a pull request with two fixes to Tony. Since -rc4 is
already there, I'll update it with this fix.
Tony,
I will resend a new pull-request rebased on -rc4 that will include this
new fix.
Regards,
Benoit
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-06-03 12:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-17 23:23 [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it Suman Anna
2013-04-17 23:56 ` Jon Hunter
2013-05-31 22:17 ` Anna, Suman
2013-06-03 12:55 ` Benoit Cousson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).