From: Sricharan R <r.sricharan@ti.com>
To: Sricharan R <r.sricharan@ti.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
tony@atomide.com, rnayak@ti.com, b-cousson@ti.com
Subject: Re: [PATCH 1/4] ARM: dts: omap5: Rename omap5-evm to omap5-uevm
Date: Wed, 5 Jun 2013 12:20:54 +0530 [thread overview]
Message-ID: <51AEDFCE.2020303@ti.com> (raw)
In-Reply-To: <1370414770-1485-2-git-send-email-r.sricharan@ti.com>
On Wednesday 05 June 2013 12:16 PM, Sricharan R wrote:
> The uevm is the official board supported for the OMAP5 soc
> in mainline. The uevm has an OMAP5432 with a DDR3 memory.
> Renaming the board dts file and adding the following cleanups.
>
> * There are no devices connected on I2C 2,3,4 buses. So remove
> the pinmux data for the same.
>
> * DDR3 memory is used in the uevm. Neither DVFS or temperature
> polling is supported with DDR3. So remove the DDR3 device and
> emif nodes.
>
> * Keypad is not supported on uevm. So remove the device node.
>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +-
> arch/arm/boot/dts/omap5-evm.dts | 261 --------------------------------------
> arch/arm/boot/dts/omap5-uevm.dts | 184 +++++++++++++++++++++++++++
> 3 files changed, 185 insertions(+), 262 deletions(-)
> delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
> create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f0895c5..13b86bf 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -149,7 +149,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
> omap4-panda-es.dtb \
> omap4-var-som.dtb \
> omap4-sdp.dtb \
> - omap5-evm.dtb \
> + omap5-uevm.dtb \
> am335x-evm.dtb \
> am335x-evmsk.dtb \
> am335x-bone.dtb
> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
> deleted file mode 100644
> index 22e9ee8..0000000
> --- a/arch/arm/boot/dts/omap5-evm.dts
> +++ /dev/null
> @@ -1,261 +0,0 @@
> -/*
> - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -/dts-v1/;
> -
> -#include "omap5.dtsi"
> -#include "samsung_k3pe0e000b.dtsi"
> -
> -/ {
> - model = "TI OMAP5 EVM board";
> - compatible = "ti,omap5-evm", "ti,omap5";
> -
> - memory {
> - device_type = "memory";
> - reg = <0x80000000 0x7F000000>; /* 2032 MB */
> - };
> -
> - vmmcsd_fixed: fixedregulator-mmcsd {
> - compatible = "regulator-fixed";
> - regulator-name = "vmmcsd_fixed";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> -};
> -
> -&omap5_pmx_core {
> - pinctrl-names = "default";
> - pinctrl-0 = <
> - &twl6040_pins
> - &mcpdm_pins
> - &dmic_pins
> - &mcbsp1_pins
> - &mcbsp2_pins
> - >;
> -
> - twl6040_pins: pinmux_twl6040_pins {
> - pinctrl-single,pins = <
> - 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
> - >;
> - };
> -
> - mcpdm_pins: pinmux_mcpdm_pins {
> - pinctrl-single,pins = <
> - 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
> - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
> - 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
> - 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
> - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
> - >;
> - };
> -
> - dmic_pins: pinmux_dmic_pins {
> - pinctrl-single,pins = <
> - 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */
> - 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */
> - 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */
> - 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
> - >;
> - };
> -
> - mcbsp1_pins: pinmux_mcbsp1_pins {
> - pinctrl-single,pins = <
> - 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
> - 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
> - 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
> - 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
> - >;
> - };
> -
> - mcbsp2_pins: pinmux_mcbsp2_pins {
> - pinctrl-single,pins = <
> - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
> - 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
> - 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
> - 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
> - >;
> - };
> -
> - i2c1_pins: pinmux_i2c1_pins {
> - pinctrl-single,pins = <
> - 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
> - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
> - >;
> - };
> -
> - i2c2_pins: pinmux_i2c2_pins {
> - pinctrl-single,pins = <
> - 0x178 (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
> - 0x17a (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
> - >;
> - };
> -
> - i2c3_pins: pinmux_i2c3_pins {
> - pinctrl-single,pins = <
> - 0x13a (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
> - 0x13c (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
> - >;
> - };
> -
> - i2c4_pins: pinmux_i2c4_pins {
> - pinctrl-single,pins = <
> - 0xb8 (PIN_INPUT | MUX_MODE0) /* i2c4_scl */
> - 0xba (PIN_INPUT | MUX_MODE0) /* i2c4_sda */
> - >;
> - };
> -
> - i2c5_pins: pinmux_i2c5_pins {
> - pinctrl-single,pins = <
> - 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
> - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
> - >;
> - };
> -
> - mcspi2_pins: pinmux_mcspi2_pins {
> - pinctrl-single,pins = <
> - 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
> - 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
> - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
> - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */
> - >;
> - };
> -
> - mcspi3_pins: pinmux_mcspi3_pins {
> - pinctrl-single,pins = <
> - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
> - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
> - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
> - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
> - >;
> - };
> -
> - mcspi4_pins: pinmux_mcspi4_pins {
> - pinctrl-single,pins = <
> - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
> - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
> - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
> - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
> - >;
> - };
> -};
> -
> -&mmc1 {
> - vmmc-supply = <&vmmcsd_fixed>;
> - bus-width = <4>;
> -};
> -
> -&mmc2 {
> - vmmc-supply = <&vmmcsd_fixed>;
> - bus-width = <8>;
> - ti,non-removable;
> -};
> -
> -&mmc3 {
> - bus-width = <4>;
> - ti,non-removable;
> -};
> -
> -&mmc4 {
> - status = "disabled";
> -};
> -
> -&mmc5 {
> - status = "disabled";
> -};
> -
> -&i2c1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c1_pins>;
> -
> - clock-frequency = <400000>;
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2_pins>;
> -
> - clock-frequency = <400000>;
> -
> - /* Pressure Sensor */
> - bmp085@77 {
> - compatible = "bosch,bmp085";
> - reg = <0x77>;
> - };
> -};
> -
> -&i2c3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c3_pins>;
> -
> - clock-frequency = <400000>;
> -};
> -
> -&i2c4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c4_pins>;
> -
> - clock-frequency = <400000>;
> -
> - /* Temperature Sensor */
> - tmp102@48{
> - compatible = "ti,tmp102";
> - reg = <0x48>;
> - };
> -};
> -
> -&i2c5 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c5_pins>;
> -
> - clock-frequency = <400000>;
> -};
> -
> -&keypad {
> - keypad,num-rows = <8>;
> - keypad,num-columns = <8>;
> - linux,keymap = <0x02020073 /* VOLUP */
> - 0x02030072 /* VOLDOWM */
> - 0x020400e7 /* SEND */
> - 0x02050066 /* HOME */
> - 0x0206006b /* END */
> - 0x020700d9>; /* SEARCH */
> - linux,input-no-autorepeat;
> -};
> -
> -&mcbsp3 {
> - status = "disabled";
> -};
> -
> -&emif1 {
> - cs1-used;
> - device-handle = <&samsung_K3PE0E000B>;
> -};
> -
> -&emif2 {
> - cs1-used;
> - device-handle = <&samsung_K3PE0E000B>;
> -};
> -
> -&mcspi1 {
> -
> -};
> -
> -&mcspi2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mcspi2_pins>;
> -};
> -
> -&mcspi3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mcspi3_pins>;
> -};
> -
> -&mcspi4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mcspi4_pins>;
> -};
> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
> new file mode 100644
> index 0000000..843a001
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap5-uevm.dts
> @@ -0,0 +1,184 @@
> +/*
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +#include "omap5.dtsi"
> +
> +/ {
> + model = "TI OMAP5 uEVM board";
> + compatible = "ti,omap5-uevm", "ti,omap5";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x7F000000>; /* 2032 MB */
> + };
> +
> + vmmcsd_fixed: fixedregulator-mmcsd {
> + compatible = "regulator-fixed";
> + regulator-name = "vmmcsd_fixed";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> +};
> +
> +&omap5_pmx_core {
> + pinctrl-names = "default";
> + pinctrl-0 = <
> + &twl6040_pins
> + &mcpdm_pins
> + &dmic_pins
> + &mcbsp1_pins
> + &mcbsp2_pins
> + >;
> +
> + twl6040_pins: pinmux_twl6040_pins {
> + pinctrl-single,pins = <
> + 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
> + >;
> + };
> +
> + mcpdm_pins: pinmux_mcpdm_pins {
> + pinctrl-single,pins = <
> + 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
> + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
> + 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
> + 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
> + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
> + >;
> + };
> +
> + dmic_pins: pinmux_dmic_pins {
> + pinctrl-single,pins = <
> + 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */
> + 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */
> + 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */
> + 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
> + >;
> + };
> +
> + mcbsp1_pins: pinmux_mcbsp1_pins {
> + pinctrl-single,pins = <
> + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
> + 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
> + 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
> + 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
> + >;
> + };
> +
> + mcbsp2_pins: pinmux_mcbsp2_pins {
> + pinctrl-single,pins = <
> + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
> + 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
> + 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
> + 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
> + >;
> + };
> +
> + i2c1_pins: pinmux_i2c1_pins {
> + pinctrl-single,pins = <
> + 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
> + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
> + >;
> + };
> +
> + i2c5_pins: pinmux_i2c5_pins {
> + pinctrl-single,pins = <
> + 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
> + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
> + >;
> + };
> +
> + mcspi2_pins: pinmux_mcspi2_pins {
> + pinctrl-single,pins = <
> + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
> + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
> + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
> + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */
> + >;
> + };
> +
> + mcspi3_pins: pinmux_mcspi3_pins {
> + pinctrl-single,pins = <
> + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
> + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
> + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
> + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
> + >;
> + };
> +
> + mcspi4_pins: pinmux_mcspi4_pins {
> + pinctrl-single,pins = <
> + 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
> + 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
> + 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
> + 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
> + >;
> + };
> +};
> +
> +&mmc1 {
> + vmmc-supply = <&vmmcsd_fixed>;
> + bus-width = <4>;
> +};
> +
> +&mmc2 {
> + vmmc-supply = <&vmmcsd_fixed>;
> + bus-width = <8>;
> + ti,non-removable;
> +};
> +
> +&mmc3 {
> + bus-width = <4>;
> + ti,non-removable;
> +};
> +
> +&mmc4 {
> + status = "disabled";
> +};
> +
> +&mmc5 {
> + status = "disabled";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> +
> + clock-frequency = <400000>;
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins>;
> +
> + clock-frequency = <400000>;
> +};
> +
> +&mcbsp3 {
> + status = "disabled";
> +};
> +
> +&mcspi1 {
> +
> +};
> +
> +&mcspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcspi2_pins>;
> +};
> +
> +&mcspi3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcspi3_pins>;
> +};
> +
> +&mcspi4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcspi4_pins>;
> +};
Sorry missed -C option in formatting.
Will resend for that
Regards,
Sricharan
next prev parent reply other threads:[~2013-06-05 6:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 6:46 [PATCH 0/4] ARM: dts: omap5: Cleanup and updates for DT files Sricharan R
2013-06-05 6:46 ` [PATCH 1/4] ARM: dts: omap5: Rename omap5-evm to omap5-uevm Sricharan R
2013-06-05 6:50 ` Sricharan R [this message]
2013-06-05 6:46 ` [PATCH 2/4] ARM: dts: omap5-uevm: Add USB Host support Sricharan R
2013-06-05 7:59 ` Florian Vaussard
2013-06-05 9:12 ` Sricharan R
2013-06-05 12:15 ` Florian Vaussard
2013-06-05 10:32 ` Roger Quadros
2013-06-05 11:50 ` Sricharan R
2013-06-05 13:57 ` Nishanth Menon
2013-06-06 17:51 ` Sricharan R
2013-06-06 18:46 ` Nishanth Menon
2013-06-07 6:08 ` Sricharan R
2013-06-05 6:46 ` [PATCH 3/4] ARM: dts: omap5-uevm: Add LED support for uEVM blue LED Sricharan R
2013-06-05 17:04 ` Dan Murphy
2013-06-06 17:52 ` Sricharan R
2013-06-05 6:46 ` [PATCH 4/4] ARM: dts: omap5-uevm: Add uart pinctrl data Sricharan R
-- strict thread matches above, loose matches on Subject: below --
2013-06-05 6:54 [PATCH 1/4] ARM: dts: omap5: Rename omap5-evm to omap5-uevm Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51AEDFCE.2020303@ti.com \
--to=r.sricharan@ti.com \
--cc=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).