From: "Cousson, Benoit" <b-cousson@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Mohammed Afzal <afzal@ti.com>, Arnd Bergmann <arnd@arndb.de>,
Paul Walmsley <paul@pwsan.com>,
Vaibhav Hiremath <hvaibhav@ti.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
Florian Vaussard <florian.vaussard@epfl.ch>,
Olof Johansson <olof@lixom.net>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: Re: [GIT PULL] ARM: OMAP: Device Tree for 3.11
Date: Thu, 20 Jun 2013 15:34:16 -0500 [thread overview]
Message-ID: <51C36748.80006@ti.com> (raw)
In-Reply-To: <20130620064541.GE5523@atomide.com>
Hi Tony,
On 6/20/2013 1:45 AM, Tony Lindgren wrote:
> Arnd & Olof,
>
> * Benoit Cousson <b-cousson@ti.com> [130619 16:10]:
>> Hi Tony,
>>
>> Please pull the following commits for OMAP Device Tree for v3.11.
>>
>> It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.
>>
>> Special thanks to Florian for his nice cleanup using the C preprocessor.
>
> It's best that Arnd and Olof take this pull request directly as we're
> getting so close to the merge window. These patches should be pretty
> much independent of the other branches I've sent, and are needed to
> keep omap4 booting now that we've flipped the switch for omap4 to be
> DT only.
Thanks and sorry for that. I was not expecting all these last minutes
series :-(
I'll stop accepting at -rc5 next time.
Regards,
Benoit
>> The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
>>
>> Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts
>>
>> for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:
>>
>> ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)
>>
>> ----------------------------------------------------------------
>> Afzal Mohammed (2):
>> ARM: dts: AM43x: Initial support
>> ARM: dts: AM43x EPOS EVM support
>>
>> Dan Murphy (3):
>> ARM: dts: omap4-panda: Update the LED support for the panda
>> ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
>> ARM: dts: omap5-uevm: Add LED support for uEVM blue LED
>>
>> Eduardo Valentin (3):
>> ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
>> ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
>> ARM: dts: OMAP5: Add bandgap DT entry
>>
>> Florian Vaussard (15):
>> ARM: dts: OMAP2+: Use #include for all device trees
>> ARM: dts: OMAP2+: Use existing constants for GPIOs
>> ARM: dts: OMAP4/5: Use existing constants for IRQs
>> ARM: dts: OMAP2+: Header file for pinctrl constants
>> ARM: dts: OMAP2+: Use pinctrl constants
>> ARM: dts: AM3XXX: Use #include for all device trees
>> ARM: dts: AM33XX: Use existing constants for GPIOs
>> ARM: dts: AM33XX: Specific pinctrl header
>> ARM: dts: AM33XX: Use pinctrl constants
>> ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
>> ARM: dts: Protect pinctrl headers against multiple inclusions
>> ARM: dts: OMAP3: Include IRQ header
>> ARM: dts: omap3-tobi: Add SMSC911X node
>> ARM: dts: omap3-tobi: Correct polarity for GPIO LED
>> ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
>>
>> J Keerthy (1):
>> ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
>>
>> Javier Martinez Canillas (3):
>> ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
>> ARM: dts: omap3-igep0020: Add NAND flash support
>> ARM: dts: omap3-igep0030: Add NAND flash support
>>
>> Kevin Hilman (3):
>> ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
>> ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
>> ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
>>
>> Mugunthan V N (3):
>> ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
>> ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
>> ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
>>
>> Philip Avinash (4):
>> ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
>> ARM: dts: AM33XX: Add PWMSS device tree nodes
>> ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
>> ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
>>
>> Philip, Avinash (1):
>> ARM: dts: AM33XX: Add ELM node
>>
>> Roger Quadros (4):
>> ARM: dts: omap5-uevm: Add USB Host support
>> ARM: dts: omap4-panda: Add USB Host support
>> ARM: dts: omap4-panda: Fix DVI EDID reads
>> ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
>>
>> Sourav Poddar (1):
>> ARM: dts: omap5-uevm: Add uart pinctrl data
>>
>> Sricharan R (1):
>> ARM: dts: omap5: Make uevm as the official board and deprecate sevm support
>>
>> Suman Anna (1):
>> ARM: dts: OMAP4+: Remove multimedia carveouts
>>
>> Vaibhav Hiremath (7):
>> ARM: dts: AM33XX: Add default pinctrl binding for I2C device
>> ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
>> ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
>> ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
>> ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
>> ARM: AM33XX: clock: Add debugSS clock nodes
>> ARM: AM33XX: clock data: Enable clkout2 as part of init
>>
>> .../devicetree/bindings/arm/omap/omap.txt | 3 +
>> arch/arm/boot/dts/Makefile | 8 +-
>> arch/arm/boot/dts/am335x-bone.dts | 118 ++++-
>> arch/arm/boot/dts/am335x-evm.dts | 264 ++++++++++-
>> arch/arm/boot/dts/am335x-evmsk.dts | 184 +++++++-
>> arch/arm/boot/dts/am33xx.dtsi | 121 ++++-
>> arch/arm/boot/dts/am3517-evm.dts | 2 +-
>> arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
>> arch/arm/boot/dts/am4372.dtsi | 68 +++
>> arch/arm/boot/dts/am43x-epos-evm.dts | 18 +
>> arch/arm/boot/dts/omap2.dtsi | 5 +-
>> arch/arm/boot/dts/omap2420-h4.dts | 2 +-
>> arch/arm/boot/dts/omap2420.dtsi | 2 +-
>> arch/arm/boot/dts/omap2430.dtsi | 2 +-
>> arch/arm/boot/dts/omap3-beagle-xm.dts | 48 +-
>> arch/arm/boot/dts/omap3-beagle.dts | 72 ++-
>> arch/arm/boot/dts/omap3-devkit8000.dts | 11 +-
>> arch/arm/boot/dts/omap3-evm.dts | 7 +-
>> arch/arm/boot/dts/omap3-igep.dtsi | 43 +-
>> arch/arm/boot/dts/omap3-igep0020.dts | 111 ++++-
>> arch/arm/boot/dts/omap3-igep0030.dts | 60 ++-
>> arch/arm/boot/dts/omap3-overo.dtsi | 20 +-
>> arch/arm/boot/dts/omap3-tobi.dts | 52 ++-
>> arch/arm/boot/dts/omap3.dtsi | 6 +-
>> arch/arm/boot/dts/omap3430-sdp.dts | 5 +-
>> arch/arm/boot/dts/omap34xx.dtsi | 2 +-
>> arch/arm/boot/dts/omap36xx.dtsi | 2 +-
>> arch/arm/boot/dts/omap4-panda-a4.dts | 10 +-
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 162 +++++--
>> arch/arm/boot/dts/omap4-panda-es.dts | 38 +-
>> arch/arm/boot/dts/omap4-panda.dts | 4 +-
>> arch/arm/boot/dts/omap4-sdp-es23plus.dts | 8 +-
>> arch/arm/boot/dts/omap4-sdp.dts | 126 ++---
>> arch/arm/boot/dts/omap4-var-som.dts | 8 +-
>> arch/arm/boot/dts/omap4.dtsi | 124 +++--
>> arch/arm/boot/dts/omap443x.dtsi | 8 +-
>> arch/arm/boot/dts/omap4460.dtsi | 15 +-
>> arch/arm/boot/dts/omap5-evm.dts | 261 -----------
>> arch/arm/boot/dts/omap5-uevm.dts | 485 ++++++++++++++++++++
>> arch/arm/boot/dts/omap5.dtsi | 173 ++++---
>> arch/arm/boot/dts/twl4030_omap3.dtsi | 25 +
>> arch/arm/mach-omap2/cclock33xx_data.c | 49 +-
>> include/dt-bindings/pinctrl/am33xx.h | 42 ++
>> include/dt-bindings/pinctrl/omap.h | 55 +++
>> 44 files changed, 2172 insertions(+), 659 deletions(-)
>> create mode 100644 arch/arm/boot/dts/am4372.dtsi
>> create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
>> delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
>> create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
>> create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
>> create mode 100644 include/dt-bindings/pinctrl/am33xx.h
>> create mode 100644 include/dt-bindings/pinctrl/omap.h
prev parent reply other threads:[~2013-06-20 20:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-19 23:04 [GIT PULL] ARM: OMAP: Device Tree for 3.11 Benoit Cousson
2013-06-20 6:45 ` Tony Lindgren
2013-06-20 9:05 ` Arnd Bergmann
2013-06-20 19:48 ` Arnd Bergmann
2013-06-20 20:48 ` Cousson, Benoit
2013-06-20 21:03 ` Arnd Bergmann
2013-06-20 20:34 ` Cousson, Benoit [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C36748.80006@ti.com \
--to=b-cousson@ti.com \
--cc=afzal@ti.com \
--cc=arnd@arndb.de \
--cc=eduardo.valentin@ti.com \
--cc=florian.vaussard@epfl.ch \
--cc=hvaibhav@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=olof@lixom.net \
--cc=paul@pwsan.com \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox