From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: Re: [PATCH v2 3/4] arm: dts: Add USB phy nodes for AM33XX
Date: Fri, 19 Jul 2013 22:33:07 +0400
Message-ID: <51E98663.2040308@cogentembedded.com>
References: <1374237277-17769-1-git-send-email-george.cherian@ti.com> <1374237277-17769-4-git-send-email-george.cherian@ti.com> <51E94571.8080805@cogentembedded.com> <51E94B30.9070805@linutronix.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <51E94B30.9070805@linutronix.de>
Sender: linux-kernel-owner@vger.kernel.org
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: George Cherian <george.cherian@ti.com>, linux-usb@vger.kernel.org, balbi@ti.com, linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org, linux-omap@vger.kernel.org, kishon@ti.com
List-Id: linux-omap@vger.kernel.org

Hello.

On 07/19/2013 06:20 PM, Sebastian Andrzej Siewior wrote:

>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi
>>> b/arch/arm/boot/dts/am33xx.dtsi
>>> index 8e1248f..e3890c4 100644
>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>> @@ -326,21 +326,59 @@
>>>                status = "disabled";
>>>            };
>>>
>>> -        usb@47400000 {
>>> -            compatible = "ti,musb-am33xx";
>>> -            reg = <0x47400000 0x1000    /* usbss */
>>> -                   0x47401000 0x800        /* musb instance 0 */
>>> -                   0x47401800 0x800>;    /* musb instance 1 */
>>> -            interrupts = <17        /* usbss */
>>> -                      18        /* musb instance 0 */
>>> -                      19>;        /* musb instance 1 */
>>> -            multipoint = <1>;
>>> -            num-eps = <16>;
>>> -            ram-bits = <12>;
>>> -            port0-mode = <3>;
>>> -            port1-mode = <3>;
>>> -            power = <250>;
>>> -            ti,hwmods = "usb_otg_hs";
>>> +        phy1: am335x-usb0@44e10620 {

>>     Shouldn't the PHYs be *under* the usb0/1 device nodes in the hierarchy?
>> They're not on the same bus as the MUSB controllers for sure.

> I redo the complete thing. I have now:

> usb: usb@47400000 {
> 	compatible = "ti,am33xx-usb";
> 	
> 	usb0_phy: phy@47401300 {
> 		compatible = "ti,am335x-usb-phy";
> 	}
> 	usb0: usb@47401000 {
> 		musb0: usb@47401400 {
> 			compatible = "mg,musbmhdrc";
> 		}
> 	}
> 	usb1_phy: phy@47402300 {
> 		compatible = "ti,am335x-usb-phy";
> 	}
> 	usb1: usb@47402000 {
> 		musb1: usb@47402400 {
> 			compatible = "mg,musbmhdrc";
> 		}
> 	}
> }

> And you want usb0_phy to be child of usb0? In the TRM they are all in
> the same block.

    Ah, the fact that PHYs didn't have the "reg" property got me muddled, I 
didn't pay attention to the address part of the node names... BTW, where is 
the "reg" prop? I see PHYs share the address space with 
"omap-control-usb@44e10620" device -- what's the point with this?

> Sebastian

WBR, Sergei