From: Mark Jackson <mpfj-list@newflow.co.uk>
To: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
Benoit Cousson <b-cousson@ti.com>,
Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH] Add support for Newflow NanoBone board
Date: Sun, 11 Aug 2013 09:27:22 +0100 [thread overview]
Message-ID: <52074AEA.4070205@newflow.co.uk> (raw)
In-Reply-To: <51DB0B85.7000102@newflow.co.uk>
On 08/07/13 19:57, Mark Jackson wrote:
> NanoBone Specification:
> -----------------------
> CPU:
> TI AM335x @ 720MHz
>
> Memory:
> 256MB DDR3
> 128MB NOR flash
> 128KB FRAM
>
> Ethernet:
> 2 x 10/100 connected to SMSC LAN8710 PHY
>
> USB:
> 1 x USB2.0 Type A
>
> I2C:
> 2Kbit EEPROM (Microchip 24AA02)
> RTC (Maxim DS1338)
> GPIO Expander (Microchip MCP23017)
>
> Expansion connector:
> 6 x UART
> 1 x MMC/SD
> 1 x USB2.0
>
> Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
> ---
> MAINTAINERS | 6 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/am335x-nano.dts | 388 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 395 insertions(+)
> create mode 100644 arch/arm/boot/dts/am335x-nano.dts
Any comments on this new board file ?
next prev parent reply other threads:[~2013-08-11 8:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-08 18:57 [PATCH] Add support for Newflow NanoBone board Mark Jackson
2013-08-11 8:27 ` Mark Jackson [this message]
2013-08-11 11:35 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52074AEA.4070205@newflow.co.uk \
--to=mpfj-list@newflow.co.uk \
--cc=b-cousson@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox