linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Fernandes <joelf-l0cyMroinI0@public.gmane.org>
To: Mark Jackson <mpfj-list-2FZW7xY0fHgqdlJmJB21zg@public.gmane.org>
Cc: Linux DaVinci Kernel List
	<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	Linux MMC List
	<linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Pantel Antoniou
	<panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>,
	Dan Williams <djbw-b10kYP2dOMg@public.gmane.org>,
	Linux OMAP List
	<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux ARM Kernel List
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources
Date: Fri, 6 Sep 2013 14:51:14 -0500	[thread overview]
Message-ID: <522A3232.2090103@ti.com> (raw)
In-Reply-To: <522A29CF.2090001-2FZW7xY0fHgqdlJmJB21zg@public.gmane.org>

On 09/06/2013 02:15 PM, Mark Jackson wrote:
> On 06/09/13 20:13, Mark Jackson wrote:
>> On 23/08/13 20:53, Joel Fernandes wrote:
>>> HWMOD removal for MMC and Crypto is breaking edma_start as the events are
>>> being manually triggered due to unused channel list not being clear. Atleast
>>> breakage has been seen on these peripherals, but it is expected Audio (McASP)
>>> maybe breaking too.
>>>
>>> This patch fixes the issue, by reading the "dmas" property from the DT node if
>>> it exists and clearing the bits in the unused channel list so that these channels
>>> are not manually triggered.
>>>
>>> v2 changes:
>>> Reduced indendation by returning from if block.
>>>
>>> Reviewed-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
>>> Reported-by: Balaji T K <balajitk-l0cyMroinI0@public.gmane.org>
>>> Cc: Pantel Antoniou <panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
>>> Signed-off-by: Joel Fernandes <joelf-l0cyMroinI0@public.gmane.org>
>>> ---
>>> Note:
>>> Patch should go in for -rc cycle as it fixes existing crypto drivers.
>>>
>>>  arch/arm/common/edma.c | 22 +++++++++++++++++++---
>>>  1 file changed, 19 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
>>> index 39ad030..3867e7e 100644
>>> --- a/arch/arm/common/edma.c
>>> +++ b/arch/arm/common/edma.c
>>> @@ -560,14 +560,30 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
>>>  static int prepare_unused_channel_list(struct device *dev, void *data)
>>>  {
>>>  	struct platform_device *pdev = to_platform_device(dev);
>>> -	int i, ctlr;
>>> +	int i = 0, ctlr;
>>> +	u32 dma_chan;
>>> +	const __be32 *dma_chan_p;
>>> +	struct property *prop;
>>> +
>>> +	if (dev->of_node) {
>>> +		of_property_for_each_u32(dev->of_node, "dmas", prop,
>>> +					 dma_chan_p, dma_chan) {
>>> +			if (i++ & 1) {
>>> +				ctlr = EDMA_CTLR(dma_chan);
>>> +				clear_bit(EDMA_CHAN_SLOT(dma_chan),
>>> +					  edma_cc[ctlr]->edma_unused);
>>> +			}
>>> +		}
>>> +		return;
>>
>> This should return something here, otherwise we get:-
>>
>> arch/arm/common/edma.c: In function 'prepare_unused_channel_list':
>> arch/arm/common/edma.c:577:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type]
> 
> Other than that I can confirm it fixes the issue for me ...

Thanks for pointing that out. Will fix it in the next revision.


Regards,

-Joel

  parent reply	other threads:[~2013-09-06 19:51 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-23 19:53 [PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources Joel Fernandes
     [not found] ` <1377287613-16491-1-git-send-email-joelf-l0cyMroinI0@public.gmane.org>
2013-08-26 10:46   ` Sekhar Nori
     [not found]     ` <521B3212.3050405-l0cyMroinI0@public.gmane.org>
2013-08-26 16:52       ` Joel Fernandes
     [not found]         ` <521B87C0.1090507-l0cyMroinI0@public.gmane.org>
2013-08-26 19:34           ` Sekhar Nori
2013-09-06 19:13   ` Mark Jackson
2013-09-06 19:15     ` Mark Jackson
     [not found]       ` <522A29CF.2090001-2FZW7xY0fHgqdlJmJB21zg@public.gmane.org>
2013-09-06 19:51         ` Joel Fernandes [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-07-22 17:59 Joel Fernandes
2013-07-27 23:32 ` Joel Fernandes
2013-07-29  7:04   ` Sekhar Nori
2013-07-30  3:53     ` Joel Fernandes
2013-07-30  4:52       ` Sekhar Nori
2013-07-30  5:05         ` Joel Fernandes
2013-07-29  7:01 ` Sekhar Nori
2013-07-30  3:47   ` Joel Fernandes
2013-07-30 16:29     ` Sekhar Nori
2013-07-31  5:06       ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=522A3232.2090103@ti.com \
    --to=joelf-l0cymroini0@public.gmane.org \
    --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
    --cc=djbw-b10kYP2dOMg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mpfj-list-2FZW7xY0fHgqdlJmJB21zg@public.gmane.org \
    --cc=panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    --cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).