[PATCH v7 11/12] arm64: dts: meson: Fix schema warnings for pwm-leds

Alexander Dahl
2020-10-05T20:36:37Z

The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.

Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---

Notes:
v6 -> v7:
* added Reviewed-by
* added another explaining sentence to commit message

v6:
* added this patch to series

.../arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 8 ++++----
3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 8bcdffdf55d0..adfc72500e66 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -42,10 +42,10 @@
};
};

- pwmleds {
+ led-controller {
compatible = "pwm-leds";

- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index bff8ec2c1c70..dcb435af4e0b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -81,10 +81,10 @@
};
};

- pwmleds {
+ led-controller {
compatible = "pwm-leds";

- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 5ab139a34c01..039a8d0d1e9b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -101,20 +101,20 @@
};
};

- leds {
+ led-controller-1 {
compatible = "gpio-leds";

- led-bluetooth {
+ led-1 {
label = "sei610:blue:bt";
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
default-state = "off";
};
};

- pwmleds {
+ led-controller-2 {
compatible = "pwm-leds";

- power {
+ led-2 {
label = "sei610:red:power";
pwms = <&pwm_AO_ab 0 30518 0>;
max-brightness = <255>;
--
2.20.1