From: Balaji T K <balajitk@ti.com>
To: Stefan Roese <stefan.roese@gmail.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
Tony Lindgren <tony@atomide.com>
Subject: Re: mmc only working when used in U-Boot
Date: Tue, 17 Dec 2013 19:18:12 +0530 [thread overview]
Message-ID: <52B0561C.5050300@ti.com> (raw)
In-Reply-To: <52B05478.1040606@gmail.com>
On Tuesday 17 December 2013 07:11 PM, Stefan Roese wrote:
> Hi!
>
> I've noticed on a custom OMAP3530 board, that the SDcard (mmc1) is only
> detected, when its previously used in U-Boot (e.g. by "mmc rescan"). So
> I tested on beagleboard and it behaved identical.
>
> Here the boot log with U-Boot scanning mmc before Linux booting:
>
> root@generic-armv7a:~# dmesg | grep mmc
> [ 2.225006] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
> [ 2.234100] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
> [ 2.260040] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
> [ 2.398071] mmc0: host does not support reading read-only switch. assuming write-enable.
> [ 2.408416] mmc0: new high speed SD card at address 0007
> [ 2.419128] mmcblk0: mmc0:0007 SD02G 1.90 GiB
> [ 2.426025] mmcblk0: p1 p2
> [ 10.241638] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
> [ 10.256011] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>
> Here the boot log without U-Boot touching mmc before Linux booting:
>
> root@generic-armv7a:~# dmesg | grep mmc
> [ 2.162689] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
> [ 2.171936] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
> [ 2.197906] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
>
> I also added the pin mux'es for the mmc to the dts and the last message
> is gone. But this doesn't help with mmc detection.
>
> BTW: This is on latest mainline Linux.
>
> Somehow U-Boot configured/enables something that is missing in the
> Linux driver. Is this a known issue? Any ideas?
>
If you are using dt boot, mostly likely it is because of missing pbias
configuration.
> Thanks,
> Stefan
>
next prev parent reply other threads:[~2013-12-17 13:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 13:41 mmc only working when used in U-Boot Stefan Roese
2013-12-17 13:48 ` Balaji T K [this message]
2013-12-17 14:01 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B0561C.5050300@ti.com \
--to=balajitk@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=stefan.roese@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox