From: Igor Grinberg <grinberg@compulab.co.il>
To: Dmitry Lifshitz <lifshitz@compulab.co.il>,
Tony Lindgren <tony@atomide.com>,
Benoit Cousson <bcousson@baylibre.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards
Date: Wed, 12 Feb 2014 14:38:06 +0200 [thread overview]
Message-ID: <52FB6B2E.9070106@compulab.co.il> (raw)
In-Reply-To: <1389532975-28281-1-git-send-email-lifshitz@compulab.co.il>
ping!
On 01/12/14 15:22, Dmitry Lifshitz wrote:
> Add support for CompuLab SBC-T3530 and SBC-T3517 boards:
>
> https://compulab.co.il/products/sbcs/sbc-t3530/
> https://compulab.co.il/products/sbcs/sbc-t3517/
>
> along with respective CoMs - CM-T3530 and CM-T3517:
>
> https://compulab.co.il/products/computer-on-modules/cm-t3530/
> https://compulab.co.il/products/computer-on-modules/cm-t3517/
>
> The device tree files have the following structure:
>
> omap3-cm-t3x.dtsi
> |
> |<-- omap3-cm-t3x30.dtsi
> | |
> | |
> | | ----- ------- ------------
> | | | CoM | | Board | | Base board |
> | | ----- ------- ------------
> | | omap3-sb-t35.dtsi
> | | |
> | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->|
> | | |
> | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->|
> | |
> |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->|
>
>
> where omap3-cm-t3730.dts, omap3-cm-t3530.dts, omap3-cm-t3517.dts
> contain CoMs specific data, while omap3-sbc-t3730.dts, omap3-sbc-t3530.dts,
> omap3-sbc-t3517.dts represent eval boards with respective core modules.
>
> This series is based on Tony's omap-for-v3.14/dt branch
>
> Dmitry Lifshitz (11):
> ARM: dts: sbc-t3x: refactor DT support
> ARM: dts: sbc-t3x: disable mmc3
> ARM: dts: sb-t35: fix Ethernet power supply
> ARM: dts: cm-t3x: add gpio-led pinmux
> ARM: dts: cm-t3x30: add twl4030 gpio pullups
> ARM: dts: cm-t3x30: add HS USB Host support
> ARM: dts: sbc-t3730: add pinmux for usb hub reset
> ARM: dts: cm-t3x30: add USB OTG support
> ARM: dts: sbc-t3530: add support for sbc-t3530
> ARM: dts: sbc-t3517: add support for sbc-t3517
> ARM: OMAP2+: make reset pulse for sbc-t3x usb hubs
>
> arch/arm/boot/dts/Makefile | 4 +
> arch/arm/boot/dts/omap3-cm-t3517.dts | 137 +++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap3-cm-t3530.dts | 13 +++
> arch/arm/boot/dts/omap3-cm-t3730.dts | 40 ----------
> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 112 +++++++++++++++++++++++++++
> arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 74 +++++++++++++-----
> arch/arm/boot/dts/omap3-sb-t35.dtsi | 30 +++++++-
> arch/arm/boot/dts/omap3-sbc-t3517.dts | 44 +++++++++++
> arch/arm/boot/dts/omap3-sbc-t3530.dts | 37 +++++++++
> arch/arm/boot/dts/omap3-sbc-t3730.dts | 24 +++---
> arch/arm/mach-omap2/pdata-quirks.c | 67 ++++++++++++++++-
> 11 files changed, 506 insertions(+), 76 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-cm-t3517.dts
> create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
> create mode 100644 arch/arm/boot/dts/omap3-cm-t3x.dtsi
> create mode 100644 arch/arm/boot/dts/omap3-sbc-t3517.dts
> create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts
>
--
Regards,
Igor.
next prev parent reply other threads:[~2014-02-12 12:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-12 13:22 [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 01/12] ARM: dts: sbc-t3x: use omap specific pinctrl defines Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 02/12] ARM: dts: sbc-t3x: refactor DT support Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 03/12] ARM: dts: sbc-t3x: disable mmc3 Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 04/12] ARM: dts: sb-t35: fix Ethernet power supply Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 05/12] ARM: dts: cm-t3x: add gpio-led pinmux Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 06/12] ARM: dts: cm-t3x30: add twl4030 gpio pullups Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 07/12] ARM: dts: cm-t3x30: add HS USB Host support Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 08/12] ARM: dts: sbc-t3730: add pinmux for usb hub reset Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 09/12] ARM: dts: cm-t3x30: add USB OTG support Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 10/12] ARM: dts: sbc-t3530: add support for sbc-t3530 Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 11/12] ARM: dts: sbc-t3517: add support for sbc-t3517 Dmitry Lifshitz
2014-01-12 13:22 ` [PATCH 12/12] ARM: OMAP2+: make reset pulse for sbc-t3x usb hubs Dmitry Lifshitz
2014-01-19 8:48 ` [PATCH 00/12] ARM: dts: sbc-t3x: add support for more boards Dmitry Lifshitz
2014-02-12 12:38 ` Igor Grinberg [this message]
2014-02-23 12:30 ` [PATCH 00/11] " Igor Grinberg
2014-02-28 22:12 ` Tony Lindgren
2014-03-02 14:15 ` Igor Grinberg
2014-03-02 17:07 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FB6B2E.9070106@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=bcousson@baylibre.com \
--cc=lifshitz@compulab.co.il \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).