From: Rajendra Nayak <rnayak@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
nm@ti.com, linux@arm.linux.org.uk, nsekhar@ti.com
Subject: Re: [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
Date: Fri, 14 Feb 2014 14:16:13 +0530 [thread overview]
Message-ID: <52FDD7D5.30508@ti.com> (raw)
In-Reply-To: <20140213231919.GO28216@atomide.com>
On Friday 14 February 2014 04:49 AM, Tony Lindgren wrote:
> * Lokesh Vutla <lokeshvutla@ti.com> [140207 02:24]:
>> From: Rajendra Nayak <rnayak@ti.com>
>>
>> The SyncTimer in AM43x is clocked using the following two sources:
>> 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system
>> time to go slowly (~10% deviation).
>> 2) external 32KHz RTC clock, which may not always be available on board like
>> in the case of ePOS EVM
>>
>> Use gptimer as clocksource instead, as is done in the case of AM335x
>> (which does not have a SyncTimer). With this, system time keeping works
>> accurately.
>
> Hmm doesn't this also mean that PM for any deeper idle states won't
> work properly?
Thats true. This would mean we cannot put the peripheral/core domain down
in idle. Suspend however can still work if suspend/resume callbacks are added
to the clockevent and clocksource code to shut the non-wakeup domain timer.
regards,
Rajendra
>
> Regards,
>
> Tony
>
>> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> arch/arm/mach-omap2/board-generic.c | 2 +-
>> arch/arm/mach-omap2/timer.c | 3 ++-
>> 2 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
>> index 8e3daa1..5679464a 100644
>> --- a/arch/arm/mach-omap2/board-generic.c
>> +++ b/arch/arm/mach-omap2/board-generic.c
>> @@ -229,7 +229,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
>> .init_late = am43xx_init_late,
>> .init_irq = omap_gic_of_init,
>> .init_machine = omap_generic_init,
>> - .init_time = omap3_sync32k_timer_init,
>> + .init_time = omap3_gptimer_timer_init,
>> .dt_compat = am43_boards_compat,
>> MACHINE_END
>> #endif
>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>> index 74044aa..b62de9f 100644
>> --- a/arch/arm/mach-omap2/timer.c
>> +++ b/arch/arm/mach-omap2/timer.c
>> @@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
>> 2, "timer_sys_ck", NULL);
>> #endif /* CONFIG_ARCH_OMAP3 */
>>
>> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
>> +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
>> + defined(CONFIG_SOC_AM43XX)
>> OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
>> 1, "timer_sys_ck", "ti,timer-alwon");
>> #endif
>> --
>> 1.7.9.5
>>
next prev parent reply other threads:[~2014-02-14 8:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-07 10:21 [PATCH V2 0/4] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1 Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 1/4] ARM: OMAP2+: AM43x: enable in default config Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 2/4] ARM: OMAP2+: AM43x: Add ID for ES1.1 Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 3/4] ARM: OMAP2+: AM43x: determine features Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource Lokesh Vutla
2014-02-13 23:19 ` Tony Lindgren
2014-02-14 8:46 ` Rajendra Nayak [this message]
2014-02-24 13:05 ` Lokesh Vutla
2014-02-28 23:34 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FDD7D5.30508@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).