From: Nishanth Menon <nm@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>, "Balbi, Felipe" <balbi@ti.com>,
Sourav Poddar <sourav.poddar@ti.com>
Subject: omap based boards (next-20140409-omap2plus_defconfig) - boot time warning:
Date: Wed, 9 Apr 2014 08:15:47 -0500 [thread overview]
Message-ID: <53454803.3090703@ti.com> (raw)
In-Reply-To: <53453FF1.60803@ti.com>
On 04/09/2014 07:41 AM, Nishanth Menon wrote:
> Hi,
> http://slexy.org/raw/s2pkLsiFBX
>
> I noticed the following sets of warnings with omap2plus_defconfig on
> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
> also had it (I have'nt retained older logs).
>
Here is a quick list of 20 odd boards I am testing with:
next-20140409-omap2plus_defconfig
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2Ho7WPbaZ
omap_hwmod: tptc* using broken dt data from edma
platform 49000000.edma: alias fck already exists
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2A5ZJjsuZ
same for tptc, edma
3: am3517-evm: Boot PASS: http://slexy.org/raw/s20q8rTwCJ
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
Address Hole seen by USB_OTG at address dc0f9c0c
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_iva'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
4: am37x-evm: Boot PASS: http://slexy.org/raw/s21kcHKdyf
nothing interesting.
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s210geZKgS
platform 53701000.des: Cannot lookup hwmod 'des'
platform 49000000.edma: alias fck already exists
the usb and qspi issue reported.
6: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s20t5JOyI4
known issue. (gpio reset for DDR)
7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s2TXdBONNI
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
8: beagleboard-vanilla: Boot PASS: http://slexy.org/raw/s24pDuZ7S7
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
9: beaglebone-black: Boot PASS: http://slexy.org/raw/s21ztl1meX
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
10: beaglebone: Boot PASS: http://slexy.org/raw/s2a2JO9MVd
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
11: craneboard: Boot PASS: http://slexy.org/raw/s20xtW58E3
Address Hole seen by USB_OTG at address 4de96fbc
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: uart4: cannot be enabled for reset (3)
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480c9000.smartreflex: Cannot lookup hwmod 'smartreflex_mpu_iva'
platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
12: DRA7xx-EVM: Boot PASS: http://slexy.org/raw/s2TR2UyTxS
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: dss_core: _wait_target_disable failed
omap_hwmod: dss_core: cannot be enabled for reset (3)
omap_hwmod: dss_dispc: cannot be enabled for reset (3)
omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
platform 4e000000.dmm: Cannot lookup hwmod 'dmm'
omap_l3_noc 44000000.ocp: couldn't find resource 2
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
13: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s21ZRwPGPg
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
omap-gpmc 6e000000.gpmc: GPMC revision 5.0
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
14: n900: Boot PASS: http://slexy.org/raw/s21oybPlxa
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
rx51_video_init cannot configure MUX for LCD RESET
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
15: pandaboard-es: Boot PASS: http://slexy.org/raw/s2qoGzHvAL
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
16: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s21kH0Lsga
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
17: sdp2430: Boot PASS: http://slexy.org/raw/s206Fygl3J
omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
twl4030_keypad: probe of keypad.29 failed with error -2
18: sdp3430: Boot PASS: http://slexy.org/raw/s24cAq4vMt
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
hw-breakpoint: debug architecture 0x4 unsupported.
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
twl4030_keypad: probe of keypad.28 failed with error -2
of_get_named_gpiod_flags: can't parse gpios property of node
'/ocp/mmc@4809c000[0]'
19: sdp4430: Boot PASS: http://slexy.org/raw/s2VTGsB5Zb
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
20: OMAP5432uEVM: Boot PASS: http://slexy.org/raw/s21I4dKlfe
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: mailbox: doesn't have mpu register target base
platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
map-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing
hwmod/omap_dev info
TOTAL = 20 boards, Booted Boards = 19, No Boot boards = 1
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-04-09 13:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 12:41 AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Nishanth Menon
2014-04-09 12:50 ` Roger Quadros
2014-04-09 12:55 ` sourav
2014-04-09 13:15 ` Nishanth Menon [this message]
2014-04-09 13:25 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53454803.3090703@ti.com \
--to=nm@ti.com \
--cc=balbi@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=sourav.poddar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).