* AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg..
@ 2014-04-09 12:41 Nishanth Menon
2014-04-09 12:50 ` Roger Quadros
2014-04-09 13:15 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Nishanth Menon
0 siblings, 2 replies; 5+ messages in thread
From: Nishanth Menon @ 2014-04-09 12:41 UTC (permalink / raw)
To: linux-omap, Roger Quadros, Balbi, Felipe, Sourav Poddar
Hi,
http://slexy.org/raw/s2pkLsiFBX
I noticed the following sets of warnings with omap2plus_defconfig on
next-20140409. As per older logs, next-20140401 had it and v3.14 tag
also had it (I have'nt retained older logs).
[ 0.226189] ------------[ cut here ]------------
[ 0.226258] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.226277] omap_hwmod: qspi: doesn't have mpu register target base
[ 0.226290] Modules linked in:
[ 0.226317] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.226389] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.226441] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.226478] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.226504] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.226535] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.226569] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.226598] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.226624] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.226659] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.226687] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.226721] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.226930] ---[ end trace 6ef0f5570cfcc358 ]---
[ 0.264599] omap_hwmod: tptc0 using broken dt data from edma
[ 0.265247] omap_hwmod: tptc1 using broken dt data from edma
[ 0.265871] omap_hwmod: tptc2 using broken dt data from edma
[ 0.274961] ------------[ cut here ]------------
[ 0.275029] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.275048] omap_hwmod: usb_otg_ss0: doesn't have mpu register
target base
[ 0.275058] Modules linked in:
[ 0.275087] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.275158] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.275209] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.275248] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.275274] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.275307] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.275344] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.275376] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.275405] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.275440] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.275468] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.275501] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.275517] ---[ end trace 6ef0f5570cfcc359 ]---
[ 0.276726] ------------[ cut here ]------------
[ 0.276777] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.276791] omap_hwmod: usb_otg_ss1: doesn't have mpu register
target base
[ 0.276802] Modules linked in:
[ 0.276826] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.276891] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.276938] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.276974] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.276999] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.277030] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.277064] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.277095] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.277121] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.277158] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.277186] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.277219] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.277234] ---[ end trace 6ef0f5570cfcc35a ]---
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg..
2014-04-09 12:41 AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Nishanth Menon
@ 2014-04-09 12:50 ` Roger Quadros
2014-04-09 12:55 ` sourav
2014-04-09 13:15 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Nishanth Menon
1 sibling, 1 reply; 5+ messages in thread
From: Roger Quadros @ 2014-04-09 12:50 UTC (permalink / raw)
To: Nishanth Menon, linux-omap, Balbi, Felipe, Sourav Poddar,
George Cherian
+George
Hi Nishant,
I remember George had sent patches to add USB DT nodes for am43xx.
Looks like they didn't get through.
Adding the USB nodes should get rid of the warning.
George,
Can you please resend a minimal set to fix this warning for -rc? Thanks.
cheers,
-roger
On 04/09/2014 03:41 PM, Nishanth Menon wrote:
> Hi,
> http://slexy.org/raw/s2pkLsiFBX
>
> I noticed the following sets of warnings with omap2plus_defconfig on
> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
> also had it (I have'nt retained older logs).
>
> [ 0.226189] ------------[ cut here ]------------
> [ 0.226258] WARNING: CPU: 0 PID: 1 at
> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
> [ 0.226277] omap_hwmod: qspi: doesn't have mpu register target base
> [ 0.226290] Modules linked in:
> [ 0.226317] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> 3.14.0-next-20140409-00006-g0fbfc2e #1
> [ 0.226389] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
> (show_stack+0x10/0x14)
> [ 0.226441] [<c001195c>] (show_stack) from [<c053cf68>]
> (dump_stack+0x78/0x94)
> [ 0.226478] [<c053cf68>] (dump_stack) from [<c003fc20>]
> (warn_slowpath_common+0x6c/0x8c)
> [ 0.226504] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
> (warn_slowpath_fmt+0x30/0x40)
> [ 0.226535] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
> (_init+0x1c0/0x3e0)
> [ 0.226569] [<c07a0b70>] (_init) from [<c0028068>]
> (omap_hwmod_for_each+0x34/0x5c)
> [ 0.226598] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
> (__omap_hwmod_setup_all+0x24/0x40)
> [ 0.226624] [<c07a12e8>] (__omap_hwmod_setup_all) from
> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
> [ 0.226659] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
> (kernel_init_freeable+0xfc/0x1cc)
> [ 0.226687] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
> (kernel_init+0x8/0xe4)
> [ 0.226721] [<c05378fc>] (kernel_init) from [<c000e6e8>]
> (ret_from_fork+0x14/0x2c)
> [ 0.226930] ---[ end trace 6ef0f5570cfcc358 ]---
> [ 0.264599] omap_hwmod: tptc0 using broken dt data from edma
> [ 0.265247] omap_hwmod: tptc1 using broken dt data from edma
> [ 0.265871] omap_hwmod: tptc2 using broken dt data from edma
> [ 0.274961] ------------[ cut here ]------------
> [ 0.275029] WARNING: CPU: 0 PID: 1 at
> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
> [ 0.275048] omap_hwmod: usb_otg_ss0: doesn't have mpu register
> target base
> [ 0.275058] Modules linked in:
> [ 0.275087] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
> 3.14.0-next-20140409-00006-g0fbfc2e #1
> [ 0.275158] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
> (show_stack+0x10/0x14)
> [ 0.275209] [<c001195c>] (show_stack) from [<c053cf68>]
> (dump_stack+0x78/0x94)
> [ 0.275248] [<c053cf68>] (dump_stack) from [<c003fc20>]
> (warn_slowpath_common+0x6c/0x8c)
> [ 0.275274] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
> (warn_slowpath_fmt+0x30/0x40)
> [ 0.275307] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
> (_init+0x1c0/0x3e0)
> [ 0.275344] [<c07a0b70>] (_init) from [<c0028068>]
> (omap_hwmod_for_each+0x34/0x5c)
> [ 0.275376] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
> (__omap_hwmod_setup_all+0x24/0x40)
> [ 0.275405] [<c07a12e8>] (__omap_hwmod_setup_all) from
> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
> [ 0.275440] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
> (kernel_init_freeable+0xfc/0x1cc)
> [ 0.275468] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
> (kernel_init+0x8/0xe4)
> [ 0.275501] [<c05378fc>] (kernel_init) from [<c000e6e8>]
> (ret_from_fork+0x14/0x2c)
> [ 0.275517] ---[ end trace 6ef0f5570cfcc359 ]---
> [ 0.276726] ------------[ cut here ]------------
> [ 0.276777] WARNING: CPU: 0 PID: 1 at
> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
> [ 0.276791] omap_hwmod: usb_otg_ss1: doesn't have mpu register
> target base
> [ 0.276802] Modules linked in:
> [ 0.276826] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
> 3.14.0-next-20140409-00006-g0fbfc2e #1
> [ 0.276891] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
> (show_stack+0x10/0x14)
> [ 0.276938] [<c001195c>] (show_stack) from [<c053cf68>]
> (dump_stack+0x78/0x94)
> [ 0.276974] [<c053cf68>] (dump_stack) from [<c003fc20>]
> (warn_slowpath_common+0x6c/0x8c)
> [ 0.276999] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
> (warn_slowpath_fmt+0x30/0x40)
> [ 0.277030] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
> (_init+0x1c0/0x3e0)
> [ 0.277064] [<c07a0b70>] (_init) from [<c0028068>]
> (omap_hwmod_for_each+0x34/0x5c)
> [ 0.277095] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
> (__omap_hwmod_setup_all+0x24/0x40)
> [ 0.277121] [<c07a12e8>] (__omap_hwmod_setup_all) from
> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
> [ 0.277158] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
> (kernel_init_freeable+0xfc/0x1cc)
> [ 0.277186] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
> (kernel_init+0x8/0xe4)
> [ 0.277219] [<c05378fc>] (kernel_init) from [<c000e6e8>]
> (ret_from_fork+0x14/0x2c)
> [ 0.277234] ---[ end trace 6ef0f5570cfcc35a ]---
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg..
2014-04-09 12:50 ` Roger Quadros
@ 2014-04-09 12:55 ` sourav
0 siblings, 0 replies; 5+ messages in thread
From: sourav @ 2014-04-09 12:55 UTC (permalink / raw)
To: Roger Quadros; +Cc: Nishanth Menon, linux-omap, Balbi, Felipe, George Cherian
Hi Nishanth,
The dts date were posted but due to some functional changes going in spi
core,
the dts data were not picked(predictiong some changes in dt parameters).
I will
send a minimal qspi node during rc cycle to get rid of this warning.
On Wednesday 09 April 2014 06:20 PM, Roger Quadros wrote:
> +George
>
> Hi Nishant,
>
> I remember George had sent patches to add USB DT nodes for am43xx.
> Looks like they didn't get through.
>
> Adding the USB nodes should get rid of the warning.
>
> George,
>
> Can you please resend a minimal set to fix this warning for -rc? Thanks.
>
> cheers,
> -roger
>
> On 04/09/2014 03:41 PM, Nishanth Menon wrote:
>> Hi,
>> http://slexy.org/raw/s2pkLsiFBX
>>
>> I noticed the following sets of warnings with omap2plus_defconfig on
>> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
>> also had it (I have'nt retained older logs).
>>
>> [ 0.226189] ------------[ cut here ]------------
>> [ 0.226258] WARNING: CPU: 0 PID: 1 at
>> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
>> [ 0.226277] omap_hwmod: qspi: doesn't have mpu register target base
>> [ 0.226290] Modules linked in:
>> [ 0.226317] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
>> 3.14.0-next-20140409-00006-g0fbfc2e #1
>> [ 0.226389] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
>> (show_stack+0x10/0x14)
>> [ 0.226441] [<c001195c>] (show_stack) from [<c053cf68>]
>> (dump_stack+0x78/0x94)
>> [ 0.226478] [<c053cf68>] (dump_stack) from [<c003fc20>]
>> (warn_slowpath_common+0x6c/0x8c)
>> [ 0.226504] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
>> (warn_slowpath_fmt+0x30/0x40)
>> [ 0.226535] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
>> (_init+0x1c0/0x3e0)
>> [ 0.226569] [<c07a0b70>] (_init) from [<c0028068>]
>> (omap_hwmod_for_each+0x34/0x5c)
>> [ 0.226598] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
>> (__omap_hwmod_setup_all+0x24/0x40)
>> [ 0.226624] [<c07a12e8>] (__omap_hwmod_setup_all) from
>> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
>> [ 0.226659] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
>> (kernel_init_freeable+0xfc/0x1cc)
>> [ 0.226687] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
>> (kernel_init+0x8/0xe4)
>> [ 0.226721] [<c05378fc>] (kernel_init) from [<c000e6e8>]
>> (ret_from_fork+0x14/0x2c)
>> [ 0.226930] ---[ end trace 6ef0f5570cfcc358 ]---
>> [ 0.264599] omap_hwmod: tptc0 using broken dt data from edma
>> [ 0.265247] omap_hwmod: tptc1 using broken dt data from edma
>> [ 0.265871] omap_hwmod: tptc2 using broken dt data from edma
>> [ 0.274961] ------------[ cut here ]------------
>> [ 0.275029] WARNING: CPU: 0 PID: 1 at
>> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
>> [ 0.275048] omap_hwmod: usb_otg_ss0: doesn't have mpu register
>> target base
>> [ 0.275058] Modules linked in:
>> [ 0.275087] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
>> 3.14.0-next-20140409-00006-g0fbfc2e #1
>> [ 0.275158] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
>> (show_stack+0x10/0x14)
>> [ 0.275209] [<c001195c>] (show_stack) from [<c053cf68>]
>> (dump_stack+0x78/0x94)
>> [ 0.275248] [<c053cf68>] (dump_stack) from [<c003fc20>]
>> (warn_slowpath_common+0x6c/0x8c)
>> [ 0.275274] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
>> (warn_slowpath_fmt+0x30/0x40)
>> [ 0.275307] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
>> (_init+0x1c0/0x3e0)
>> [ 0.275344] [<c07a0b70>] (_init) from [<c0028068>]
>> (omap_hwmod_for_each+0x34/0x5c)
>> [ 0.275376] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
>> (__omap_hwmod_setup_all+0x24/0x40)
>> [ 0.275405] [<c07a12e8>] (__omap_hwmod_setup_all) from
>> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
>> [ 0.275440] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
>> (kernel_init_freeable+0xfc/0x1cc)
>> [ 0.275468] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
>> (kernel_init+0x8/0xe4)
>> [ 0.275501] [<c05378fc>] (kernel_init) from [<c000e6e8>]
>> (ret_from_fork+0x14/0x2c)
>> [ 0.275517] ---[ end trace 6ef0f5570cfcc359 ]---
>> [ 0.276726] ------------[ cut here ]------------
>> [ 0.276777] WARNING: CPU: 0 PID: 1 at
>> arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
>> [ 0.276791] omap_hwmod: usb_otg_ss1: doesn't have mpu register
>> target base
>> [ 0.276802] Modules linked in:
>> [ 0.276826] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
>> 3.14.0-next-20140409-00006-g0fbfc2e #1
>> [ 0.276891] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
>> (show_stack+0x10/0x14)
>> [ 0.276938] [<c001195c>] (show_stack) from [<c053cf68>]
>> (dump_stack+0x78/0x94)
>> [ 0.276974] [<c053cf68>] (dump_stack) from [<c003fc20>]
>> (warn_slowpath_common+0x6c/0x8c)
>> [ 0.276999] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
>> (warn_slowpath_fmt+0x30/0x40)
>> [ 0.277030] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
>> (_init+0x1c0/0x3e0)
>> [ 0.277064] [<c07a0b70>] (_init) from [<c0028068>]
>> (omap_hwmod_for_each+0x34/0x5c)
>> [ 0.277095] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
>> (__omap_hwmod_setup_all+0x24/0x40)
>> [ 0.277121] [<c07a12e8>] (__omap_hwmod_setup_all) from
>> [<c0008ab8>] (do_one_initcall+0x34/0x15c)
>> [ 0.277158] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
>> (kernel_init_freeable+0xfc/0x1cc)
>> [ 0.277186] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
>> (kernel_init+0x8/0xe4)
>> [ 0.277219] [<c05378fc>] (kernel_init) from [<c000e6e8>]
>> (ret_from_fork+0x14/0x2c)
>> [ 0.277234] ---[ end trace 6ef0f5570cfcc35a ]---
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* omap based boards (next-20140409-omap2plus_defconfig) - boot time warning:
2014-04-09 12:41 AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Nishanth Menon
2014-04-09 12:50 ` Roger Quadros
@ 2014-04-09 13:15 ` Nishanth Menon
2014-04-09 13:25 ` Roger Quadros
1 sibling, 1 reply; 5+ messages in thread
From: Nishanth Menon @ 2014-04-09 13:15 UTC (permalink / raw)
To: linux-omap, Roger Quadros, Balbi, Felipe, Sourav Poddar
On 04/09/2014 07:41 AM, Nishanth Menon wrote:
> Hi,
> http://slexy.org/raw/s2pkLsiFBX
>
> I noticed the following sets of warnings with omap2plus_defconfig on
> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
> also had it (I have'nt retained older logs).
>
Here is a quick list of 20 odd boards I am testing with:
next-20140409-omap2plus_defconfig
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2Ho7WPbaZ
omap_hwmod: tptc* using broken dt data from edma
platform 49000000.edma: alias fck already exists
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2A5ZJjsuZ
same for tptc, edma
3: am3517-evm: Boot PASS: http://slexy.org/raw/s20q8rTwCJ
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
Address Hole seen by USB_OTG at address dc0f9c0c
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_iva'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
4: am37x-evm: Boot PASS: http://slexy.org/raw/s21kcHKdyf
nothing interesting.
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s210geZKgS
platform 53701000.des: Cannot lookup hwmod 'des'
platform 49000000.edma: alias fck already exists
the usb and qspi issue reported.
6: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s20t5JOyI4
known issue. (gpio reset for DDR)
7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s2TXdBONNI
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
8: beagleboard-vanilla: Boot PASS: http://slexy.org/raw/s24pDuZ7S7
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
9: beaglebone-black: Boot PASS: http://slexy.org/raw/s21ztl1meX
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
10: beaglebone: Boot PASS: http://slexy.org/raw/s2a2JO9MVd
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
11: craneboard: Boot PASS: http://slexy.org/raw/s20xtW58E3
Address Hole seen by USB_OTG at address 4de96fbc
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: uart4: cannot be enabled for reset (3)
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480c9000.smartreflex: Cannot lookup hwmod 'smartreflex_mpu_iva'
platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
12: DRA7xx-EVM: Boot PASS: http://slexy.org/raw/s2TR2UyTxS
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: dss_core: _wait_target_disable failed
omap_hwmod: dss_core: cannot be enabled for reset (3)
omap_hwmod: dss_dispc: cannot be enabled for reset (3)
omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
platform 4e000000.dmm: Cannot lookup hwmod 'dmm'
omap_l3_noc 44000000.ocp: couldn't find resource 2
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
13: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s21ZRwPGPg
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
omap-gpmc 6e000000.gpmc: GPMC revision 5.0
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
14: n900: Boot PASS: http://slexy.org/raw/s21oybPlxa
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
rx51_video_init cannot configure MUX for LCD RESET
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
15: pandaboard-es: Boot PASS: http://slexy.org/raw/s2qoGzHvAL
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
16: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s21kH0Lsga
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
17: sdp2430: Boot PASS: http://slexy.org/raw/s206Fygl3J
omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
twl4030_keypad: probe of keypad.29 failed with error -2
18: sdp3430: Boot PASS: http://slexy.org/raw/s24cAq4vMt
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
hw-breakpoint: debug architecture 0x4 unsupported.
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
twl4030_keypad: probe of keypad.28 failed with error -2
of_get_named_gpiod_flags: can't parse gpios property of node
'/ocp/mmc@4809c000[0]'
19: sdp4430: Boot PASS: http://slexy.org/raw/s2VTGsB5Zb
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
20: OMAP5432uEVM: Boot PASS: http://slexy.org/raw/s21I4dKlfe
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: mailbox: doesn't have mpu register target base
platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
map-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing
hwmod/omap_dev info
TOTAL = 20 boards, Booted Boards = 19, No Boot boards = 1
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: omap based boards (next-20140409-omap2plus_defconfig) - boot time warning:
2014-04-09 13:15 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Nishanth Menon
@ 2014-04-09 13:25 ` Roger Quadros
0 siblings, 0 replies; 5+ messages in thread
From: Roger Quadros @ 2014-04-09 13:25 UTC (permalink / raw)
To: Nishanth Menon, linux-omap, Balbi, Felipe, Sourav Poddar
Nishant,
On 04/09/2014 04:15 PM, Nishanth Menon wrote:
> On 04/09/2014 07:41 AM, Nishanth Menon wrote:
>> Hi,
>> http://slexy.org/raw/s2pkLsiFBX
>>
>> I noticed the following sets of warnings with omap2plus_defconfig on
>> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
>> also had it (I have'nt retained older logs).
>>
>
> Here is a quick list of 20 odd boards I am testing with:
>
> next-20140409-omap2plus_defconfig
>
> 1: am335x-evm: Boot PASS: http://slexy.org/raw/s2Ho7WPbaZ
> omap_hwmod: tptc* using broken dt data from edma
> platform 49000000.edma: alias fck already exists
>
> 2: am335x-sk: Boot PASS: http://slexy.org/raw/s2A5ZJjsuZ
> same for tptc, edma
>
> 3: am3517-evm: Boot PASS: http://slexy.org/raw/s20q8rTwCJ
> omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
> omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
> Address Hole seen by USB_OTG at address dc0f9c0c
> platform iva.2: Cannot lookup hwmod 'iva'
> platform 480c5000.aes: Cannot lookup hwmod 'aes'
> platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
> platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
> platform 480c3000.sham: Cannot lookup hwmod 'sham'
> platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
> platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_iva'
> edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
>
> 4: am37x-evm: Boot PASS: http://slexy.org/raw/s21kcHKdyf
> nothing interesting.
>
> 5: am43xx-epos: Boot PASS: http://slexy.org/raw/s210geZKgS
> platform 53701000.des: Cannot lookup hwmod 'des'
> platform 49000000.edma: alias fck already exists
> the usb and qspi issue reported.
>
> 6: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s20t5JOyI4
> known issue. (gpio reset for DDR)
>
> 7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s2TXdBONNI
> omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
> omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
> omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
> omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
these 2 usb host/tll messages seem to appear for all OMAP3 based boards.
Seems like incorrect hwmod data. I'll send a patch to fix this.
cheers,
-roger
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-09 13:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-09 12:41 AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Nishanth Menon
2014-04-09 12:50 ` Roger Quadros
2014-04-09 12:55 ` sourav
2014-04-09 13:15 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Nishanth Menon
2014-04-09 13:25 ` Roger Quadros
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).