From: Nishanth Menon <nm@ti.com>
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: linux-omap <linux-omap@vger.kernel.org>,
Peter Ujfalusi <peter.ujfalusi@ti.com>
Subject: Re: regressions in linux-next?
Date: Tue, 22 Apr 2014 17:52:20 -0500 [thread overview]
Message-ID: <5356F2A4.6010106@ti.com> (raw)
In-Reply-To: <CABxcv=nATX0m8janD=kTZ_Askuy8StNx5r9vJM_Fq+EmQeZ0-g@mail.gmail.com>
On 04/22/2014 05:45 PM, Javier Martinez Canillas wrote:
[...]
>>> Time for me to verify every platform again.
>> ok, boards updated with u-boot fixes etc..
>>
>> next-20140422-omap2plus_defconfig
>> 1: am335x-sk: Boot FAIL: http://slexy.org/raw/s2o4V7QFmX
>> This one is in discussion in this thread.
We just managed to get am335x-evm up and running as well.
am335x-evm: Boot PASS: http://slexy.org/raw/s2WSAKSG2S
I checked with DEBUG_LL a few mins back on AM335x-sk:
http://slexy.org/raw/s2P8L4FGBY
>>
>> 2: am3517-evm: Boot PASS: http://slexy.org/raw/s21U08MZIu
>> 3: am37x-evm: Boot PASS: http://slexy.org/raw/s2TYm46GgG
>> 4: am43xx-epos: Boot PASS: http://slexy.org/raw/s21wjoqqjl
>> 5: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s2X8Rh0sSw
>> we know of this one.
>
> The fix for this is [PATCH] ARM: dts: am437x-gp-evm: Do not reset
> gpio5 [0] right?
Yep, This is a different issue compared to the AM335x-sk discussion.
http://marc.info/?l=linux-omap&m=139819642824190&w=2
two patches for this one:
https://patchwork.kernel.org/patch/3871201/
https://patchwork.kernel.org/patch/4034201/
we are still debating about how to go about it.
>
on AM335x-sk:
> So this makes only am335x-sk to fail with the gpiolib irpchip
> conversion as reported by Peter and you.
>
> Do you know what special use of GPIO have this board to behave
> differently than the other boards? I've looked at the DTS but didn't
> find anything evident.
I could not find anything interesting yet. Peter did mention that
reverting d04b76626e94 helped make the platform boot fine. I am trying
to add a few prints and see which specific line does things go bad..
and if so why.. unfortunately, I am using the board remotely as well..
Will try to track this down in the next few hours and post back.
>
> [0]: http://www.spinics.net/lists/linux-omap/msg104702.html
>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-04-22 22:52 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 13:18 regressions in linux-next? Nishanth Menon
2014-04-22 13:29 ` Peter Ujfalusi
2014-04-22 15:52 ` Javier Martinez Canillas
2014-04-22 19:37 ` Ezequiel Garcia
2014-04-22 22:32 ` Javier Martinez Canillas
2014-04-22 22:00 ` Linus Walleij
2014-04-22 23:03 ` Javier Martinez Canillas
2014-04-22 23:47 ` Tony Lindgren
2014-04-24 15:16 ` Kevin Hilman
2014-04-24 15:25 ` Nishanth Menon
2014-04-24 15:37 ` Javier Martinez Canillas
2014-04-24 15:42 ` Tony Lindgren
2014-04-24 16:33 ` Javier Martinez Canillas
2014-04-24 16:47 ` Tony Lindgren
2014-04-24 15:40 ` Tony Lindgren
2014-04-24 15:46 ` Nishanth Menon
2014-04-24 16:17 ` Tony Lindgren
2014-04-24 17:08 ` Nishanth Menon
2014-04-24 19:59 ` Aaro Koskinen
2014-04-24 19:22 ` Aaro Koskinen
2014-04-28 22:04 ` Paul Walmsley
2014-04-22 15:13 ` Nishanth Menon
2014-04-22 21:57 ` Nishanth Menon
2014-04-22 22:45 ` Javier Martinez Canillas
2014-04-22 22:52 ` Nishanth Menon [this message]
2014-04-22 23:08 ` Javier Martinez Canillas
2014-04-23 1:30 ` Nishanth Menon
2014-04-23 7:24 ` Javier Martinez Canillas
2014-04-23 10:59 ` Peter Ujfalusi
2014-04-23 13:01 ` Linus Walleij
2014-04-23 13:29 ` Nishanth Menon
2014-04-23 14:38 ` Linus Walleij
2014-04-23 14:50 ` Javier Martinez Canillas
2014-04-23 14:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5356F2A4.6010106@ti.com \
--to=nm@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-omap@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox