linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>, linux-can@vger.kernel.org
Cc: wsa@the-dreams.de, linux-omap@vger.kernel.org, kernel@pengutronix.de
Subject: Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
Date: Mon, 17 Nov 2014 14:31:55 +0200	[thread overview]
Message-ID: <5469EABB.10506@ti.com> (raw)
In-Reply-To: <5469E61D.4050507@pengutronix.de>

On 11/17/2014 02:12 PM, Marc Kleine-Budde wrote:
> On 11/17/2014 01:09 PM, Roger Quadros wrote:
>> AM4372 SoC has 2 DCAN modules. Add compatible id and
>> raminit driver data for it. The driver data is same as AM3352
>> but this gives us flexibility to add AM4372 specific quirks
>> if required later.
> 
> Strictly speaking we don't need the hunk in
> "drivers/net/can/c_can/c_can_platform.c" yet, iff the AM4372 dts(i) has
> this compatible:
> 
> "ti,am4372-d_can", "ti,am3352-d_can"

I tried with that, but checkpatch still gives this warning
WARNING: DT compatible string "ti,am4372-d_can" appears un-documented -- check ./Documentation/devicetree/bindings/

I guess we can just live with it. Please ignore this patch in that case.

cheers,
-roger

> 
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  Documentation/devicetree/bindings/net/can/c_can.txt | 3 ++-
>>  drivers/net/can/c_can/c_can_platform.c              | 1 +
>>  2 files changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
>> index 6731730..5a1d8b0 100644
>> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
>> +++ b/Documentation/devicetree/bindings/net/can/c_can.txt
>> @@ -4,7 +4,8 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
>>  Required properties:
>>  - compatible		: Should be "bosch,c_can" for C_CAN controllers and
>>  			  "bosch,d_can" for D_CAN controllers.
>> -			  Can be "ti,dra7-d_can" or "ti,am3352-d_can".
>> +			  Can be "ti,dra7-d_can", "ti,am3352-d_can" or
>> +			  "ti,am4372-d_can".
>>  - reg			: physical base address and size of the C_CAN/D_CAN
>>  			  registers map
>>  - interrupts		: property with a value describing the interrupt
>> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
>> index f4488e5..a4535d2 100644
>> --- a/drivers/net/can/c_can/c_can_platform.c
>> +++ b/drivers/net/can/c_can/c_can_platform.c
>> @@ -235,6 +235,7 @@ static const struct of_device_id c_can_of_table[] = {
>>  	{ .compatible = "bosch,d_can", .data = &d_can_drvdata },
>>  	{ .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
>>  	{ .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata },
>> +	{ .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata },
>>  	{ /* sentinel */ },
>>  };
>>  MODULE_DEVICE_TABLE(of, c_can_of_table);
>>
> 
> Marc
> 


  reply	other threads:[~2014-11-17 12:31 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-14 18:09 [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 1/8] can: c_can: Add timeout to c_can_hw_raminit_ti() Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 2/8] can: c_can: Introduce c_can_driver_data structure Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 3/8] can: c_can: Add RAMINIT register information to driver data Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 4/8] can: c_can: Add syscon/regmap RAMINIT mechanism Marc Kleine-Budde
2015-01-05  9:18   ` Tomi Valkeinen
2015-01-07  9:56     ` Roger Quadros
2014-11-14 18:09 ` [PATCH v8 5/8] can: c_can: Add support for START pulse in RAMINIT sequence Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 6/8] can: c_can: Disable pins when CAN interface is down Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 7/8] can: c_can: Add support for TI DRA7 DCAN Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 8/8] can: c_can: Add support for TI am3352 DCAN Marc Kleine-Budde
2014-11-17 12:07 ` [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Roger Quadros
2014-11-17 12:09 ` [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN Roger Quadros
2014-11-17 12:12   ` Marc Kleine-Budde
2014-11-17 12:31     ` Roger Quadros [this message]
2014-11-17 14:19       ` Roger Quadros
2014-11-17 14:31         ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5469EABB.10506@ti.com \
    --to=rogerq@ti.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).