From: Roger Quadros <rogerq@ti.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
wg@grandegger.com, tony@atomide.com
Cc: jay.schroeder@garmin.com, linux-can@vger.kernel.org,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] net: can: c_can: Fix default pinmux glitch at init
Date: Tue, 7 Jul 2015 17:35:42 +0300 [thread overview]
Message-ID: <559BE3BE.2020608@ti.com> (raw)
In-Reply-To: <559BE34F.8080508@pengutronix.de>
On 07/07/15 17:33, Marc Kleine-Budde wrote:
> On 07/07/2015 04:27 PM, Roger Quadros wrote:
>> From: "J.D. Schroeder" <jay.schroeder@garmin.com>
>>
>> The previous change 3973c526ae9c (net: can: c_can: Disable pins when CAN interface
>> is down) causes a slight glitch on the pinctrl settings when used. Since
>> commit ab78029 (drivers/pinctrl: grab default handles from device core),
>> the device core will automatically set the default pins. This causes
>> the pins to be momentarily set to the default and then to the sleep
>> state in register_c_can_dev(). By adding an optional "enable" state,
>> boards can set the default pin state to be disabled and avoid the
>> glitch when the switch from default to sleep first occurs. If the
>> "enable" state is not available c_can_pinctrl_select_state() falls
>> back to using the "default" pinctrl state.
>>
>> [Roger Q] - Forward port to v4.2
>>
>> Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> drivers/net/can/c_can/c_can.c | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
>> index 041525d..66e98e7 100644
>> --- a/drivers/net/can/c_can/c_can.c
>> +++ b/drivers/net/can/c_can/c_can.c
>> @@ -605,7 +605,18 @@ static int c_can_start(struct net_device *dev)
>> priv->can.state = CAN_STATE_ERROR_ACTIVE;
>>
>> /* activate pins */
>> - pinctrl_pm_select_default_state(dev->dev.parent);
>> +#ifdef CONFIG_PINCTRL
>
> Please remove the ifdef, AFAICS there are static inline noop functions
> if CONFIG_PINCTRL switched off.
yes, you are right.
cheers,
-roger
>
>> + if (priv->device->pins) {
>> + struct pinctrl_state *s;
>> +
>> + /* Attempt to use "active" if available else use "default" */
>> + s = pinctrl_lookup_state(priv->device->pins->p, "active");
>> + if (!IS_ERR(s))
>> + pinctrl_select_state(priv->device->pins->p, s);
>> + else
>> + pinctrl_pm_select_default_state(dev->dev.parent);
>> + }
>> +#endif
>> return 0;
>> }
>>
>>
>
> Marc
>
next prev parent reply other threads:[~2015-07-07 14:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-07 14:27 [PATCH 0/2] ARM: dra7: fix DCAN glitch Roger Quadros
2015-07-07 14:27 ` [PATCH 1/2] net: can: c_can: Fix default pinmux glitch at init Roger Quadros
2015-07-07 14:33 ` Marc Kleine-Budde
2015-07-07 14:35 ` Roger Quadros [this message]
2015-07-07 14:37 ` Roger Quadros
2015-07-07 14:43 ` Marc Kleine-Budde
2015-07-08 8:09 ` Roger Quadros
2015-07-08 8:17 ` Marc Kleine-Budde
2015-07-07 15:49 ` Grygorii Strashko
2015-07-08 8:13 ` Roger Quadros
2015-07-08 10:31 ` Grygorii Strashko
2015-07-08 10:44 ` Roger Quadros
2015-07-08 11:38 ` [PATCH v2 " Roger Quadros
2015-07-09 10:58 ` Grygorii Strashko
2015-07-09 10:59 ` Marc Kleine-Budde
2015-07-09 11:19 ` Grygorii Strashko
2015-07-07 14:27 ` [PATCH 2/2] ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux Roger Quadros
2015-07-09 18:34 ` Marc Kleine-Budde
2015-07-12 19:18 ` Marc Kleine-Budde
2015-07-13 6:29 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559BE3BE.2020608@ti.com \
--to=rogerq@ti.com \
--cc=jay.schroeder@garmin.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).