From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: "Sebastian Reichel" <sre@kernel.org>,
"Pali Rohár" <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: linux 4.2-rc1 broken Nokia N900
Date: Tue, 14 Jul 2015 09:18:52 +0900 [thread overview]
Message-ID: <55A4556C.6030007@samsung.com> (raw)
In-Reply-To: <20150713193232.GA15675@earth>
On 14.07.2015 04:32, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Jul 13, 2015 at 06:05:47PM +0200, Pali Rohár wrote:
>> now I'm testing 4.2-rc2 release and rtc is working:
>>
>> [ 27.426055] omap_i2c 48072000.i2c: controller timed out
>> [ 28.723358] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
>> [ 30.127014] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
>> [ 31.373626] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
>>
>> There is still some i2c time out line and some reset detected, but
>> driver loads fine.
>>
>> But problem with touchscreen tsc2005 and wifi wl1251 is still there :-(
>> Drivers are compiled as external .ko modules.
>
> Right, my kernel was with everything built-in.
>
>> Plus I see new problem with bq2415_charger :-(
>
> Mh did you see them in 4.1?
>
>> [ 54.214965] isp1704_charger isp1704: registered with product id isp1707
>> [ 54.828674] bq2415x-charger 2-006b: automode enabled
>> [ 55.192596] ------------[ cut here ]------------
>> [ 55.200561] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1443 __queue_delayed_work+0x50/0x144()
>> ...
>> [ 55.489501] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1445 __queue_delayed_work+0xb4/0x144()
>> ...
>> [ 55.820953] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1376 __queue_work+0x2c0/0x404()
>> ...
>> [ 56.243347] bq2415x-charger 2-006b: driver registered
>
> So the driver tries to send a notification before it's fully
> registered. The warnings are probably a side-effect of the
> power-supply API changes in 4.1.
>
>> [ 77.142181] INFO: rcu_preempt detected stalls on CPUs/tasks: { P528} (detected by 0, t=2102 jiffies, g=1101, c=1100, q=3834)
>> [ 77.163391] kworker/0:3 R running 0 528 2 0x00000000
>> [ 77.173706] Workqueue: events power_supply_changed_work
>> [ 77.183898] [<c042883c>] (__schedule) from [<c0428c94>] (preempt_schedule_irq+0x54/0x84)
>> [ 77.194274] [<c0428c94>] (preempt_schedule_irq) from [<c042c23c>] (svc_preempt+0x8/0x18)
>> [ 77.204711] [<c042c23c>] (svc_preempt) from [<c0047ce4>] (queue_delayed_work_on+0x40/0x44)
>> [ 77.215179] [<c0047ce4>] (queue_delayed_work_on) from [<bf0a59e4>] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger])
>> [ 77.235870] [<bf0a59e4>] (bq2415x_notifier_call [bq2415x_charger]) from [<c004de34>] (notifier_call_chain+0x38/0x68)
>> [ 77.257019] [<c004de34>] (notifier_call_chain) from [<c004dff4>] (__atomic_notifier_call_chain+0x34/0x44)
>> [ 77.278411] [<c004dff4>] (__atomic_notifier_call_chain) from [<c004e018>] (atomic_notifier_call_chain+0x14/0x18)
>> [ 77.299804] [<c004e018>] (atomic_notifier_call_chain) from [<c0305a9c>] (power_supply_changed_work+0xac/0x130)
>> [ 77.321197] [<c0305a9c>] (power_supply_changed_work) from [<c00484d8>] (process_one_work+0x278/0x45c)
>> [ 77.342529] [<c00484d8>] (process_one_work) from [<c0048918>] (worker_thread+0x230/0x354)
>> [ 77.353393] [<c0048918>] (worker_thread) from [<c004d0e0>] (kthread+0xcc/0xe0)
>> [ 77.364074] [<c004d0e0>] (kthread) from [<c000eb08>] (ret_from_fork+0x14/0x2c)
>> [ 77.374572] kworker/0:3 R running 0 528 2 0x00000000
>> [ 77.384948] Workqueue: events power_supply_changed_work
>> [ 77.395111] [<c042883c>] (__schedule) from [<c0428c94>] (preempt_schedule_irq+0x54/0x84)
>> [ 77.405456] [<c0428c94>] (preempt_schedule_irq) from [<c042c23c>] (svc_preempt+0x8/0x18)
>> [ 77.415863] [<c042c23c>] (svc_preempt) from [<c0047ce4>] (queue_delayed_work_on+0x40/0x44)
>> [ 77.426269] [<c0047ce4>] (queue_delayed_work_on) from [<bf0a59e4>] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger])
>> [ 77.447174] [<bf0a59e4>] (bq2415x_notifier_call [bq2415x_charger]) from [<c004de34>] (notifier_call_chain+0x38/0x68)
>> [ 77.468322] [<c004de34>] (notifier_call_chain) from [<c004dff4>] (__atomic_notifier_call_chain+0x34/0x44)
>> [ 77.489990] [<c004dff4>] (__atomic_notifier_call_chain) from [<c004e018>] (atomic_notifier_call_chain+0x14/0x18)
>> [ 77.512115] [<c004e018>] (atomic_notifier_call_chain) from [<c0305a9c>] (power_supply_changed_work+0xac/0x130)
>> [ 77.534637] [<c0305a9c>] (power_supply_changed_work) from [<c00484d8>] (process_one_work+0x278/0x45c)
>> [ 77.557189] [<c00484d8>] (process_one_work) from [<c0048918>] (worker_thread+0x230/0x354)
>> [ 77.568634] [<c0048918>] (worker_thread) from [<c004d0e0>] (kthread+0xcc/0xe0)
>> [ 77.579925] [<c004d0e0>] (kthread) from [<c000eb08>] (ret_from_fork+0x14/0x2c)
>
> Not sure about these.
I've got an idea however I cannot test it (I don't have the hardware).
I'll sent it with RFT.
Best regards,
Krzysztof
next prev parent reply other threads:[~2015-07-14 0:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 12:05 linux 4.2-rc1 broken Nokia N900 Pali Rohár
2015-07-13 6:44 ` Tony Lindgren
2015-07-13 8:09 ` Sebastian Reichel
2015-07-13 17:03 ` Michael Welling
2015-07-13 17:09 ` Pali Rohár
2015-07-13 17:56 ` Michael Welling
2015-07-13 20:28 ` Michael Welling
2015-07-13 20:34 ` Pali Rohár
2015-07-13 21:52 ` Michael Welling
2015-07-13 22:02 ` Pali Rohár
2015-07-13 22:36 ` Michael Welling
2015-07-14 7:14 ` Pali Rohár
2015-07-14 7:45 ` Tony Lindgren
2015-07-14 16:33 ` Michael Welling
2015-07-14 20:01 ` Pavel Machek
2015-07-14 20:17 ` Michael Welling
2015-07-15 19:49 ` Pavel Machek
2015-07-15 20:10 ` Michael Welling
2015-07-21 7:31 ` Pavel Machek
2015-07-21 7:33 ` Pavel Machek
2015-07-21 8:04 ` Pali Rohár
2015-07-20 20:48 ` Michael Welling
2015-07-20 20:46 ` Michael Welling
2015-07-20 20:58 ` Pali Rohár
2015-07-21 9:34 ` Pavel Machek
2015-07-21 21:28 ` Michael Welling
2015-07-22 0:17 ` Michael Welling
2015-07-22 2:03 ` Sebastian Reichel
2015-07-22 5:13 ` Michael Welling
2015-07-22 7:27 ` Pali Rohár
2015-07-22 13:33 ` Sebastian Reichel
2015-07-22 14:27 ` Pali Rohár
2015-07-22 13:30 ` Pavel Machek
2015-07-25 8:55 ` Pali Rohár
2015-07-28 8:39 ` Pali Rohár
2015-07-28 12:26 ` Sebastian Reichel
2015-07-28 12:32 ` Pali Rohár
2015-07-13 11:10 ` Pali Rohár
2015-07-13 13:26 ` Tony Lindgren
2015-07-13 15:51 ` Sebastian Reichel
2015-07-13 16:05 ` Pali Rohár
2015-07-13 19:32 ` Sebastian Reichel
2015-07-14 0:18 ` Krzysztof Kozlowski [this message]
2015-07-24 8:18 ` Dave Young
2015-07-24 8:30 ` Ivaylo Dimitrov
2015-07-24 10:28 ` Dave Young
2015-07-24 10:53 ` Pali Rohár
2015-07-24 8:40 ` Pali Rohár
2015-07-24 10:33 ` Dave Young
2015-07-24 10:52 ` Pali Rohár
2015-07-24 15:50 ` Pali Rohár
2015-07-24 8:51 ` Pavel Machek
2015-07-24 10:39 ` Dave Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A4556C.6030007@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).