Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Felipe Balbi <balbi@ti.com>, Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	Linux ARM Kernel Mailing List
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] ARM: OMAP: DRA7: hwmod: Add data for McASP3
Date: Wed, 11 Nov 2015 21:25:53 +0200	[thread overview]
Message-ID: <56439641.6070901@ti.com> (raw)
In-Reply-To: <1447261631-26362-1-git-send-email-balbi@ti.com>

Felipe,

On 11/11/2015 07:07 PM, Felipe Balbi wrote:
> From: Peter Ujfalusi <peter.ujfalusi@ti.com>
> 
> McASP3 is used by default on DRA7x based boards for audio.

While this patch works, it is not the correct one(s) to apply.
https://lkml.org/lkml/2015/10/30/91
is the series which should have been applied to 4.4.
Paul acked the series, but for some reason it missed the initial ARM pull for 4.4

-- 
Péter

> 
> This fixes following error with Beagle x15:
> 
> [    0.402190] platform 48468000.mcasp: Cannot lookup hwmod 'mcasp3'
> 
> which is followed by a splat:
> 
> [   11.207663] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> [   11.207670] ------------[ cut here ]------------
> [   11.207683] WARNING: CPU: 0 PID: 272 at /home/balbi/workspace/linux/drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c()
> [   11.207688] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER2_P3 (Read): Data Access in User mode during Functional access
> [   11.207742] Modules linked in: snd_soc_simple_card(+) omapdss leds_gpio led_class gpio_fan extcon_usb_gpio cpufreq_dt omap_wdt phy_omap_usb2 snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap snd_soc_tlv320aic3x rtc_omap snd_soc_core ti_soc_thermal dwc3_omap snd_pcm_dmaengine snd_pcm extcon_palmas snd_timer extcon snd rtc_palmas rtc_ds1307 tmp102 palmas_pwrbutton thermal_sys soundcore hwmon autofs4
> [   11.207748] CPU: 0 PID: 272 Comm: systemd-udevd Not tainted 4.3.0-11482-g3d26f1f5fc82-dirty #27
> [   11.207751] Hardware name: Generic DRA74X (Flattened Device Tree)
> [   11.207765] [<c0017c3c>] (unwind_backtrace) from [<c0013f80>] (show_stack+0x10/0x14)
> [   11.207772] [<c0013f80>] (show_stack) from [<c034d444>] (dump_stack+0x84/0x9c)
> [   11.207783] [<c034d444>] (dump_stack) from [<c003cc24>] (warn_slowpath_common+0x78/0xb4)
> [   11.207790] [<c003cc24>] (warn_slowpath_common) from [<c003cc90>] (warn_slowpath_fmt+0x30/0x40)
> [   11.207798] [<c003cc90>] (warn_slowpath_fmt) from [<c0379ce0>] (l3_interrupt_handler+0x220/0x34c)
> [   11.207805] [<c0379ce0>] (l3_interrupt_handler) from [<c009d9c0>] (handle_irq_event_percpu+0x44/0x1f0)
> [   11.207811] [<c009d9c0>] (handle_irq_event_percpu) from [<c009dba4>] (handle_irq_event+0x38/0x5c)
> [   11.207818] [<c009dba4>] (handle_irq_event) from [<c00a0d68>] (handle_fasteoi_irq+0xcc/0x1b0)
> [   11.207824] [<c00a0d68>] (handle_fasteoi_irq) from [<c009d070>] (generic_handle_irq+0x20/0x34)
> [   11.207829] [<c009d070>] (generic_handle_irq) from [<c009d350>] (__handle_domain_irq+0x64/0xe0)
> [   11.207835] [<c009d350>] (__handle_domain_irq) from [<c0009520>] (gic_handle_irq+0x40/0x8c)
> [   11.207842] [<c0009520>] (gic_handle_irq) from [<c06521b4>] (__irq_usr+0x54/0x80)
> [   11.207846] Exception stack(0xed143fb0 to 0xed143ff8)
> [   11.207851] 3fa0:                                     7f69b370 7f69b368 00000370 00000000
> [   11.207857] 3fc0: b6ddb4e0 7f69b370 00000016 7f69b308 be8db278 be8db2a0 7f68b024 00000001
> [   11.207863] 3fe0: b6ddb4e0 be8db180 b6d46a47 b6d46a50 60000030 ffffffff
> [   11.207866] ---[ end trace 7d8de48d1bc8fbac ]---
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 41 +++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index 51d1ecb384bd..b730c582a1f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1298,6 +1298,38 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
>  };
>  
>  /*
> + * 'mcasp' class
> + *
> + */
> +static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
> +	.sysc_offs	= 0x0004,
> +	.sysc_flags	= SYSC_HAS_SIDLEMODE,
> +	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> +	.sysc_fields	= &omap_hwmod_sysc_type3,
> +};
> +
> +static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
> +	.name	= "mcasp",
> +	.sysc	= &dra7xx_mcasp_sysc,
> +};
> +
> +/* mcasp3 */
> +static struct omap_hwmod dra7xx_mcasp3_hwmod = {
> +	.name		= "mcasp3",
> +	.class		= &dra7xx_mcasp_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.main_clk	= "mcasp3_ahclkx_mux",
> +	.flags		= HWMOD_SWSUP_SIDLE,
> +	.prcm = {
> +		.omap4 = {
> +			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
> +			.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
> +			.modulemode   = MODULEMODE_SWCTRL,
> +		},
> +	},
> +};
> +
> +/*
>   * 'mmc' class
>   *
>   */
> @@ -2566,6 +2598,14 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> mcasp3 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_mcasp3_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_per1 -> elm */
>  static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
>  	.master		= &dra7xx_l4_per1_hwmod,
> @@ -3308,6 +3348,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_wkup__dcan1,
>  	&dra7xx_l4_per2__dcan2,
>  	&dra7xx_l4_per2__cpgmac0,
> +	&dra7xx_l4_per2__mcasp3,
>  	&dra7xx_gmac__mdio,
>  	&dra7xx_l4_cfg__dma_system,
>  	&dra7xx_l3_main_1__dss,
> 

  reply	other threads:[~2015-11-11 19:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-11 17:07 [PATCH] ARM: OMAP: DRA7: hwmod: Add data for McASP3 Felipe Balbi
2015-11-11 19:25 ` Peter Ujfalusi [this message]
2015-11-11 19:31   ` Felipe Balbi
2015-11-11 20:22   ` Paul Walmsley
2015-11-11 21:40     ` Tony Lindgren
2015-11-11 22:45       ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56439641.6070901@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=balbi@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox