[PATCH 0/7] Add mmc support for dm814x and dra62x

[PATCH 0/7] Add mmc support for dm814x and dra62x

[Tony Lindgren]

Hi,

These patches add mmc support for dm814x and dra62x. These patches
depend on what's listed at:

http://marc.info/?l=linux-omap&m=144918431819264&w=2

Regards,

Tony


Tony Lindgren (7):
  ARM: dts: Add pinctrl macros for dm814x
  ARM: dts: Update edma bindings on dm814x to use edma_xbar
  ARM: OMAP2+: Add mmc hwmod entries for dm814x
  ARM: dts: Add mmc device entries for dm814x
  ARM: dts: Add mmc support for dm8148-evm
  ARM: dts: Add mmc support for dra62x j5-eco evm
  ARM: dts: Enable emmc on hp t410

 arch/arm/boot/dts/dm8148-evm.dts           |  31 +++++++++
 arch/arm/boot/dts/dm8148-t410.dts          |  35 ++++++++++
 arch/arm/boot/dts/dm814x.dtsi              | 101 +++++++++++++++++++++++++----
 arch/arm/boot/dts/dra62x-j5eco-evm.dts     |  31 +++++++++
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c |  93 +++++++++++++++++++++++---
 include/dt-bindings/pinctrl/dm814x.h       |  48 ++++++++++++++
 include/dt-bindings/pinctrl/omap.h         |   1 +
 7 files changed, 319 insertions(+), 21 deletions(-)
 create mode 100644 include/dt-bindings/pinctrl/dm814x.h

-- 
2.6.2

[PATCH 1/7] ARM: dts: Add pinctrl macros for dm814x

[Tony Lindgren]

Let's add the DM814X_IOPAD macro the same way as we have for dm816x and
am33xx as this allows comparing the registers with the documentation easily.
The pinctrl bits are yet again different on dm814x.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi        |  2 +-
 include/dt-bindings/pinctrl/dm814x.h | 48 ++++++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/omap.h   |  1 +
 3 files changed, 50 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/pinctrl/dm814x.h

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 09a8d88..ca92346 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -5,7 +5,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/pinctrl/dm814x.h>
 
 #include "skeleton.dtsi"
 
diff --git a/include/dt-bindings/pinctrl/dm814x.h b/include/dt-bindings/pinctrl/dm814x.h
new file mode 100644
index 0000000..0f48427
--- /dev/null
+++ b/include/dt-bindings/pinctrl/dm814x.h
@@ -0,0 +1,48 @@
+/*
+ * This header provides constants specific to DM814X pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_DM814X_H
+#define _DT_BINDINGS_PINCTRL_DM814X_H
+
+#include <dt-bindings/pinctrl/omap.h>
+
+#undef INPUT_EN
+#undef PULL_UP
+#undef PULL_ENA
+
+/*
+ * Note that dm814x silicon revision 2.1 and older require input enabled
+ * (bit 18 set) for all 3.3V I/Os to avoid cumulative hardware damage. For
+ * more info, see errata advisory 2.1.87. We leave bit 18 out of
+ * function-mask in dm814x.h and rely on the bootloader for it.
+ */
+#define INPUT_EN		(1 << 18)
+#define PULL_UP			(1 << 17)
+#define PULL_DISABLE		(1 << 16)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 1394925..d1e1512 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -61,6 +61,7 @@
 #define OMAP3430_CORE2_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
 #define OMAP3630_CORE2_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
+#define DM814X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM4372_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-- 
2.6.2

[PATCH 2/7] ARM: dts: Update edma bindings on dm814x to use edma_xbar

[Tony Lindgren]

The edma is the same as on am33xx, except it has four tptc
instances. And we need the edma_xbar for at least mmc3, so
let's use the edma_xbar and the new binding as suggested by
Peter Ujfalusi <peter.ujfalusi@ti.com>.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 68 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 58 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index ca92346..9d81980e 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -126,8 +126,8 @@
 				interrupts = <65>;
 				ti,spi-num-cs = <4>;
 				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 &edma 17
-					&edma 18 &edma 19>;
+				dmas = <&edma 16 0 &edma 17 0
+					&edma 18 0 &edma 19 0>;
 				dma-names = "tx0", "rx0", "tx1", "rx1";
 			};
 
@@ -145,7 +145,7 @@
 				reg = <0x20000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <72>;
-				dmas = <&edma 26 &edma 27>;
+				dmas = <&edma 26 0 &edma 27 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -155,7 +155,7 @@
 				reg = <0x22000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <73>;
-				dmas = <&edma 28 &edma 29>;
+				dmas = <&edma 28 0 &edma 29 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -165,7 +165,7 @@
 				reg = <0x24000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <74>;
-				dmas = <&edma 30 &edma 31>;
+				dmas = <&edma 30 0 &edma 31 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -205,6 +205,14 @@
 					};
 				};
 
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
 				/*
 				 * Note that silicon revision 2.1 and older
 				 * require input enabled (bit 18 set) for all
@@ -272,12 +280,52 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+			ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc3: tptc@49b00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc3";
+			reg =	<0x49b00000 0x100000>;
+			interrupts = <115>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		/* See TRM "Table 1-318. L4HS Instance Summary" */
-- 
2.6.2

Re: [PATCH 2/7] ARM: dts: Update edma bindings on dm814x to use edma_xbar

[Peter Ujfalusi]

On 12/04/2015 03:25 AM, Tony Lindgren wrote:
> The edma is the same as on am33xx, except it has four tptc
> instances. And we need the edma_xbar for at least mmc3, so
> let's use the edma_xbar and the new binding as suggested by
> Peter Ujfalusi <peter.ujfalusi@ti.com>.
> 
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  arch/arm/boot/dts/dm814x.dtsi | 68 ++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 58 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
> index ca92346..9d81980e 100644
> --- a/arch/arm/boot/dts/dm814x.dtsi
> +++ b/arch/arm/boot/dts/dm814x.dtsi
> @@ -126,8 +126,8 @@
>  				interrupts = <65>;
>  				ti,spi-num-cs = <4>;
>  				ti,hwmods = "mcspi1";
> -				dmas = <&edma 16 &edma 17
> -					&edma 18 &edma 19>;
> +				dmas = <&edma 16 0 &edma 17 0
> +					&edma 18 0 &edma 19 0>;
>  				dma-names = "tx0", "rx0", "tx1", "rx1";
>  			};
>  
> @@ -145,7 +145,7 @@
>  				reg = <0x20000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <72>;
> -				dmas = <&edma 26 &edma 27>;
> +				dmas = <&edma 26 0 &edma 27 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -155,7 +155,7 @@
>  				reg = <0x22000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <73>;
> -				dmas = <&edma 28 &edma 29>;
> +				dmas = <&edma 28 0 &edma 29 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -165,7 +165,7 @@
>  				reg = <0x24000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <74>;
> -				dmas = <&edma 30 &edma 31>;
> +				dmas = <&edma 30 0 &edma 31 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -205,6 +205,14 @@
>  					};
>  				};
>  
> +				edma_xbar: dma-router@f90 {
> +					compatible = "ti,am335x-edma-crossbar";
> +					reg = <0xf90 0x40>;
> +					#dma-cells = <3>;
> +					dma-requests = <32>;
> +					dma-masters = <&edma>;
> +				};
> +
>  				/*
>  				 * Note that silicon revision 2.1 and older
>  				 * require input enabled (bit 18 set) for all
> @@ -272,12 +280,52 @@
>  		};
>  
>  		edma: edma@49000000 {
> -			compatible = "ti,edma3";
> -			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> -			reg =	<0x49000000 0x10000>,
> -				<0x44e10f90 0x40>;
> +			compatible = "ti,edma3-tpcc";
> +			ti,hwmods = "tpcc";
> +			reg =	<0x49000000 0x10000>;
> +			reg-names = "edma3_cc";
>  			interrupts = <12 13 14>;
> -			#dma-cells = <1>;
> +			interrupt-names = "edma3_ccint", "emda3_mperr",
> +					  "edma3_ccerrint";
> +			dma-requests = <64>;
> +			#dma-cells = <2>;
> +
> +			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
> +				   <&edma_tptc2 3>, <&edma_tptc3 0>;
> +
> +			ti,edma-memcpy-channels = /bits/ 16 <20 21>;
> +		};
> +
> +		edma_tptc0: tptc@49800000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc0";
> +			reg =	<0x49800000 0x100000>;
> +			interrupts = <112>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc1: tptc@49900000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc1";
> +			reg =	<0x49900000 0x100000>;
> +			interrupts = <113>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc2: tptc@49a00000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc2";
> +			reg =	<0x49a00000 0x100000>;
> +			interrupts = <114>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc3: tptc@49b00000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc3";
> +			reg =	<0x49b00000 0x100000>;
> +			interrupts = <115>;
> +			interrupt-names = "edma3_tcerrint";
>  		};
>  
>  		/* See TRM "Table 1-318. L4HS Instance Summary" */
> 


-- 
Péter

[PATCH 3/7] ARM: OMAP2+: Add mmc hwmod entries for dm814x

[Tony Lindgren]

Let's add mmc entries for dm814x. To do that, we need to rename some
entries to be common for 81xx.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 93 ++++++++++++++++++++++++++----
 1 file changed, 83 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 1b96cdf..6ee5ba5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -912,7 +912,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
+static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x110,
 	.syss_offs	= 0x114,
@@ -923,24 +923,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class dm816x_mmc_class = {
+static struct omap_hwmod_class dm81xx_mmc_class = {
 	.name = "mmc",
-	.sysc = &dm816x_mmc_sysc,
+	.sysc = &dm81xx_mmc_sysc,
 };
 
-static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = {
+static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = {
 	{ .role = "dbck", .clk = "sysclk18_ck", },
 };
 
-static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
-	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+static struct omap_hsmmc_dev_attr mmc_dev_attr = {
+};
+
+static struct omap_hwmod dm814x_mmc1_hwmod = {
+	.name		= "mmc1",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc1_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc2_hwmod = {
+	.name		= "mmc2",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc2_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc3_hwmod = {
+	.name		= "mmc3",
+	.clkdm_name	= "alwon_l3_med_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = {
+	.master		= &dm81xx_alwon_l3_med_hwmod,
+	.slave		= &dm814x_mmc3_hwmod,
+	.clk		= "sysclk4_ck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod dm816x_mmc1_hwmod = {
 	.name		= "mmc1",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.opt_clks	= dm816x_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dm816x_mmc1_opt_clks),
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
@@ -948,8 +1018,8 @@ static struct omap_hwmod dm816x_mmc1_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mmc1_dev_attr,
-	.class		= &dm816x_mmc_class,
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = {
@@ -1252,6 +1322,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_l4_ls__gpio2,
 	&dm81xx_l4_ls__elm,
 	&dm81xx_l4_ls__mcspi1,
+	&dm814x_l4_ls__mmc1,
+	&dm814x_l4_ls__mmc2,
 	&dm81xx_alwon_l3_fast__tpcc,
 	&dm81xx_alwon_l3_fast__tptc0,
 	&dm81xx_alwon_l3_fast__tptc1,
@@ -1265,6 +1337,7 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm814x_l4_ls__timer2,
 	&dm814x_l4_hs__cpgmac0,
 	&dm814x_cpgmac0__mdio,
+	&dm814x_alwon_l3_med__mmc3,
 	NULL,
 };
 
-- 
2.6.2

[PATCH 4/7] ARM: dts: Add mmc device entries for dm814x

[Tony Lindgren]

Add mmc device entries for dm814x.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 9d81980e..18a8f0d 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -183,6 +183,28 @@
 				ti,hwmods = "timer3";
 			};
 
+			mmc1: mmc@60000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc1";
+				dmas = <&edma 24 0
+					&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				interrupt-parent = <&intc>;
+				reg = <0x60000 0x1000>;
+			};
+
+			mmc2: mmc@1d8000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc2";
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				interrupt-parent = <&intc>;
+				reg = <0x1d8000 0x1000>;
+			};
+
 			control: control@140000 {
 				compatible = "ti,dm814-scm", "simple-bus";
 				reg = <0x140000 0x20000>;
@@ -279,6 +301,15 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		/* Board must configure evtmux with edma_xbar for EDMA */
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3-tpcc";
 			ti,hwmods = "tpcc";
-- 
2.6.2

[PATCH 5/7] ARM: dts: Add mmc support for dm8148-evm

[Tony Lindgren]

There is a mmc slot on the dm8148-evm that's wired to the sd_1
interface.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm8148-evm.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 109fd47..08d01c3 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -15,6 +15,14 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cpsw_emac0 {
@@ -26,3 +34,26 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii";
 };
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+};
-- 
2.6.2

[PATCH 6/7] ARM: dts: Add mmc support for dra62x j5-eco evm

[Tony Lindgren]

There's mmc interface on j5-eco evm that's wired to the
sd_1 interface.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra62x-j5eco-evm.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 49a05d2..97ac839 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -15,6 +15,14 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cpsw_emac0 {
@@ -26,3 +34,26 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii";
 };
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+};
-- 
2.6.2

[PATCH 7/7] ARM: dts: Enable emmc on hp t410

[Tony Lindgren]

There's a 2GB emmc on hp t410 that's wired to the sd_2 interface.
Note that we also need to configure the evtmux using edma_xbar for
edma channels.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm8148-t410.dts | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 79838dd..d1927a7 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -15,6 +15,13 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cpsw_emac0 {
@@ -26,3 +33,31 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii";
 };
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
+		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
+	dma-names = "tx", "rx";
+};
+
+&pincntl {
+	sd2_pins: pinmux_sd2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
+			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
+			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
+			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
+			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
+			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
+			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
+			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
+			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
+			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
+			DM814X_IOPAD(0x0920, PIN_INPUT | 40)	/* SD2_SDCD */
+			>;
+	};
+};
-- 
2.6.2

Re: [PATCH 7/7] ARM: dts: Enable emmc on hp t410

[Peter Ujfalusi]

On 12/04/2015 03:25 AM, Tony Lindgren wrote:
> There's a 2GB emmc on hp t410 that's wired to the sd_2 interface.
> Note that we also need to configure the evtmux using edma_xbar for
> edma channels.
> 
> Signed-off-by: Tony Lindgren <tony@atomide.com>

One question inlined for the mmc3, other than that:
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  arch/arm/boot/dts/dm8148-t410.dts | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
> index 79838dd..d1927a7 100644
> --- a/arch/arm/boot/dts/dm8148-t410.dts
> +++ b/arch/arm/boot/dts/dm8148-t410.dts
> @@ -15,6 +15,13 @@
>  		device_type = "memory";
>  		reg = <0x80000000 0x40000000>;	/* 1 GB */
>  	};
> +
> +	vmmcsd_fixed: fixedregulator@0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
>  };
>  
>  &cpsw_emac0 {
> @@ -26,3 +33,31 @@
>  	phy_id = <&davinci_mdio>, <1>;
>  	phy-mode = "rgmii";
>  };
> +
> +&mmc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sd2_pins>;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <8>;
> +	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
> +		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
> +	dma-names = "tx", "rx";

Do you happened to know how the audio is connected on the board?
The DM814x-EVM seams to be using McASP2 with aic3106 so it is possible that HP
copied the design from there...

> +};
> +
> +&pincntl {
> +	sd2_pins: pinmux_sd2_pins {
> +		pinctrl-single,pins = <
> +			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
> +			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
> +			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
> +			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
> +			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
> +			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
> +			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
> +			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
> +			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
> +			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
> +			DM814X_IOPAD(0x0920, PIN_INPUT | 40)	/* SD2_SDCD */
> +			>;
> +	};
> +};
> 


-- 
Péter

Re: [PATCH 7/7] ARM: dts: Enable emmc on hp t410

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [151204 01:21]:
> On 12/04/2015 03:25 AM, Tony Lindgren wrote:
> > There's a 2GB emmc on hp t410 that's wired to the sd_2 interface.
> > Note that we also need to configure the evtmux using edma_xbar for
> > edma channels.
> > 
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> One question inlined for the mmc3, other than that:
> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> 
> > ---
> >  arch/arm/boot/dts/dm8148-t410.dts | 35 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
> > index 79838dd..d1927a7 100644
> > --- a/arch/arm/boot/dts/dm8148-t410.dts
> > +++ b/arch/arm/boot/dts/dm8148-t410.dts
> > @@ -15,6 +15,13 @@
> >  		device_type = "memory";
> >  		reg = <0x80000000 0x40000000>;	/* 1 GB */
> >  	};
> > +
> > +	vmmcsd_fixed: fixedregulator@0 {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vmmcsd_fixed";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +	};
> >  };
> >  
> >  &cpsw_emac0 {
> > @@ -26,3 +33,31 @@
> >  	phy_id = <&davinci_mdio>, <1>;
> >  	phy-mode = "rgmii";
> >  };
> > +
> > +&mmc3 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&sd2_pins>;
> > +	vmmc-supply = <&vmmcsd_fixed>;
> > +	bus-width = <8>;
> > +	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
> > +		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
> > +	dma-names = "tx", "rx";
> 
> Do you happened to know how the audio is connected on the board?
> The DM814x-EVM seams to be using McASP2 with aic3106 so it is possible that HP
> copied the design from there...

I grepped the sources for it and these are the evtmux channels the original
code is using. So maybe they have some different audio setup, the hacks in the
original board file mention "hdmi-dai".

Regards,

Tony