From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status() Date: Fri, 26 Feb 2016 15:53:18 +0200 Message-ID: <56D058CE.5050205@ti.com> References: <1456388939-15722-1-git-send-email-peter.ujfalusi@ti.com> <20160226010658.GN5783@n2100.arm.linux.org.uk> <56D0279F.2050703@ti.com> <20160226112524.GP5783@n2100.arm.linux.org.uk> <56D048EA.2000604@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <56D048EA.2000604@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Russell King - ARM Linux Cc: vinod.koul@intel.com, dmaengine@vger.kernel.org, linux-omap@vger.kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-omap@vger.kernel.org On 2016-02-26 14:45, Peter Ujfalusi wrote: > On 2016-02-26 13:25, Russell King - ARM Linux wrote: >>>> Your original commit adding the original hack that you're now remo= ving >>>> above says that this is to support polled operation: I'm not aware= of >>>> DMA engine supporting such a mode. DMA_PREP_INTERRUPT is a mechan= ism >>>> where requests can be queued without an interrupt to allow batchin= g. >>> >>> Also it is used to suppress DMA interrupts during audio playback fo= r example. >>> In this case we will run w/o interrupts and the position is polled. >>> >>>> See the raid5/async_tx code, which queues a set of operations with= out >>>> DMA_PREP_INTERRUPT, with the final operation with DMA_PREP_INTERRU= PT >>>> set. >>> >>> We only allow the interrupts to be disabled in cyclic or memcpy mod= e. With >>> slave_sg we have interrupts as it is needed to move to the next SG. >>> >>>> As the driver is reliant on interrupts to move to the next transfe= r, >>>> the patch which causes DMA_PREP_INTERRUPT to influence whether >>>> interrupts are sent is actually buggy, and will prevent several >>>> queued DMA operations to fail. >>> >>> Yes, the omap-dma only allows the interrupts to be actually disable= d when it >>> is save to do so. slave_sg can not work w/o interrupts so there we = don't >>> disable them. >> >> I get the impression that you haven't taken in what I've said, becau= se >> each fragment of your reply is just repeating what the previous frag= ment >> said. >=20 > Sorry about that. I got it. >=20 >> Let me state that I don't believe you need any hacks here, and this = patch >> is not necessary: the final operation in a set of chained memcpy()s = should >> have DMA_PREP_INTERRUPT set. >=20 > calling the omap_dma_callback() from the tx_status() was a bad idea, = this is > why I'm fixing it. The reason that we need to be able to determine if the channel is done = with the copy by polling the tx_status is: we need to read and write tiler registers with DMA on dra7 as per one ERRATA document. This read/write = can be executed in interrupt context so we can not rely on DMA callback to be notified about the completion of the read/write. > As for the DMA_PREP_INTERRUPT not enabling interrupt was introduced b= y: > 4ce98c0a20bef (dmaengine: omap-dma: Add support for memcpy) >=20 > While we do not have users submitting multiple descriptors I agree th= at this > is a possibility and the driver should not fail in such a case. > I can send a followup patch to fix the omap_dma_prep_dma_memcpy() With the updated patch based on your comments I can fix the polling in = the tx_status callback and with a separate patch I can address your concern regarding to multiple transfers queued with only the last one having DMA_PREP_INTERRUPT (and callback provided). --=20 P=E9ter