From: Roger Quadros <rogerq@ti.com>
To: balbi@kernel.org, grygorii.strashko@ti.com
Cc: tony@atomide.com, Joao.Pinto@synopsys.com,
sergei.shtylyov@cogentembedded.com, peter.chen@freescale.com,
jun.li@freescale.com, yoshihiro.shimoda.uh@renesas.com,
nsekhar@ti.com, b-liu@ti.com, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
rogerq@ti.com
Subject: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
Date: Fri, 10 Jun 2016 12:56:00 +0300 [thread overview]
Message-ID: <575A8EB0.1050706@ti.com> (raw)
In-Reply-To: <574E92E8.5080201@ti.com>
Implementations might use different IRQs for
host, gadget so use named interrupt resources
to allow device tree to specify the interrupts.
Following are the interrupt names
Peripheral Interrupt - peripheral
HOST Interrupt - host
Maintain backward compatibility for a single named
interrupt ("dwc3_usb3") for all interrupts as well as
unnamed interrupt at index 0 for all interrupts.
As platform_get_irq_() variants are used, tackle
the -EPROBE_DEFER case as well.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
v10:
- don't mention otg irq since we are not using it yet
- use platform_get_irq() and friends and check -EPROBE_DEFER case.
drivers/usb/dwc3/core.c | 22 ++++++++--------------
drivers/usb/dwc3/gadget.c | 29 ++++++++++++++++++++++++++---
drivers/usb/dwc3/host.c | 41 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 74 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 8fceeb1..131e7eb 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -766,7 +766,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
- dev_err(dev, "failed to initialize gadget\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to initialize gadget\n");
return ret;
}
break;
@@ -774,7 +775,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
ret = dwc3_host_init(dwc);
if (ret) {
- dev_err(dev, "failed to initialize host\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to initialize host\n");
return ret;
}
break;
@@ -782,13 +784,15 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
ret = dwc3_host_init(dwc);
if (ret) {
- dev_err(dev, "failed to initialize host\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to initialize host\n");
return ret;
}
ret = dwc3_gadget_init(dwc);
if (ret) {
- dev_err(dev, "failed to initialize gadget\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to initialize gadget\n");
return ret;
}
break;
@@ -843,16 +847,6 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->mem = mem;
dwc->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "missing IRQ\n");
- return -ENODEV;
- }
- dwc->xhci_resources[1].start = res->start;
- dwc->xhci_resources[1].end = res->end;
- dwc->xhci_resources[1].flags = res->flags;
- dwc->xhci_resources[1].name = res->name;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0f6fb8e..774a0d8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1738,7 +1738,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
int ret = 0;
int irq;
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+ irq = dwc->irq_gadget;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc->ev_buf);
if (ret) {
@@ -1746,7 +1746,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
irq, ret);
goto err0;
}
- dwc->irq_gadget = irq;
spin_lock_irqsave(&dwc->lock, flags);
if (dwc->gadget_driver) {
@@ -2866,7 +2865,31 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
*/
int dwc3_gadget_init(struct dwc3 *dwc)
{
- int ret;
+ int ret, irq;
+ struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+
+ irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq(dwc3_pdev, 0);
+ if (irq <= 0) {
+ if (irq != -EPROBE_DEFER) {
+ dev_err(dwc->dev,
+ "missing peripheral IRQ\n");
+ }
+ return irq;
+ }
+ }
+ }
+
+ dwc->irq_gadget = irq;
dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
&dwc->ctrl_req_addr, GFP_KERNEL);
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index c679f63..eb5e8f9 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -24,7 +24,46 @@ int dwc3_host_init(struct dwc3 *dwc)
{
struct platform_device *xhci;
struct usb_xhci_pdata pdata;
- int ret;
+ int ret, irq;
+ struct resource *res;
+ struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+
+ irq = platform_get_irq_byname(dwc3_pdev, "host");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq(dwc3_pdev, 0);
+ if (irq <= 0) {
+ if (irq != -EPROBE_DEFER) {
+ dev_err(dwc->dev,
+ "missing host IRQ\n");
+ }
+ return irq;
+ } else {
+ res = platform_get_resource(dwc3_pdev,
+ IORESOURCE_IRQ, 0);
+ }
+ } else {
+ res = platform_get_resource_byname(dwc3_pdev,
+ IORESOURCE_IRQ,
+ "dwc_usb3");
+ }
+
+ } else {
+ res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ,
+ "host");
+ }
+
+ dwc->xhci_resources[1].start = irq;
+ dwc->xhci_resources[1].end = irq;
+ dwc->xhci_resources[1].flags = res->flags;
+ dwc->xhci_resources[1].name = res->name;
xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
if (!xhci) {
--
2.7.4
next prev parent reply other threads:[~2016-06-10 9:56 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 14:36 [PATCH v8 0/5] dwc3: omap: fixes and dual-role preparation Roger Quadros
2016-05-11 14:36 ` [PATCH v8 1/5] usb: dwc3: omap: use request_threaded_irq() Roger Quadros
2016-05-11 14:36 ` [PATCH v8 2/5] usb: dwc3: omap: Mark the interrupt handler as shared Roger Quadros
2016-05-11 14:36 ` [PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT Roger Quadros
2016-05-11 14:36 ` [PATCH v8 4/5] usb: dwc3: omap: Pass VBUS and ID events transparently Roger Quadros
2016-05-11 14:36 ` [PATCH v8 5/5] usb: dwc3: core: cleanup IRQ resources Roger Quadros
2016-05-24 9:35 ` Felipe Balbi
2016-05-24 12:35 ` Roger Quadros
2016-06-01 7:46 ` [PATCH v9 " Roger Quadros
2016-06-01 8:06 ` Felipe Balbi
2016-06-07 9:28 ` Roger Quadros
2016-06-02 11:52 ` Grygorii Strashko
2016-06-07 9:34 ` Roger Quadros
[not found] ` <57569543.4090007-l0cyMroinI0@public.gmane.org>
2016-06-07 11:49 ` Grygorii Strashko
2016-06-07 12:44 ` Roger Quadros
2016-06-07 13:09 ` Felipe Balbi
[not found] ` <877fe1b0xx.fsf-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-06-07 14:05 ` Roger Quadros
2016-06-10 7:56 ` Roger Quadros
[not found] ` <57501E0D.4010007-l0cyMroinI0@public.gmane.org>
2016-06-10 8:02 ` Roger Quadros
2016-06-10 8:04 ` Roger Quadros
2016-06-10 8:18 ` Felipe Balbi
2016-06-10 8:32 ` Roger Quadros
2016-06-10 9:18 ` Felipe Balbi
2016-06-10 8:11 ` Felipe Balbi
2016-06-10 9:56 ` Roger Quadros [this message]
2016-06-10 10:39 ` [PATCH v10 " Sergei Shtylyov
2016-06-10 11:35 ` Roger Quadros
2016-06-10 11:44 ` Sergei Shtylyov
2016-06-10 11:46 ` Roger Quadros
2016-06-10 12:22 ` Sergei Shtylyov
2016-06-10 11:48 ` [PATCH v11 " Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575A8EB0.1050706@ti.com \
--to=rogerq@ti.com \
--cc=Joao.Pinto@synopsys.com \
--cc=b-liu@ti.com \
--cc=balbi@kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=jun.li@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=peter.chen@freescale.com \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=tony@atomide.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).