From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Stephan Linz <linz@li-pro.net>
Cc: linux-leds@vger.kernel.org, linux-ide@vger.kernel.org,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Russell King" <linux@armlinux.org.uk>,
"Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@free-electrons.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Sekhar Nori" <nsekhar@ti.com>,
"Kevin Hilman" <khilman@kernel.org>,
"Daniel Mack" <daniel@zonque.org>,
"Haojian Zhuang" <haojian.zhuang@gmail.com>,
"Robert Jarzmik" <robert.jarzmik@free.fr>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
Date: Mon, 13 Jun 2016 09:42:12 +0200 [thread overview]
Message-ID: <575E63D4.6030507@samsung.com> (raw)
In-Reply-To: <20160610060021.12382-4-linz@li-pro.net>
Hi all,
For consistency reasons this patch should be merged through LED tree,
but I need an ack from relevant maintainer. Benoit, Tony?
Thanks,
Jacek Anaszewski
On 06/10/2016 07:59 AM, Stephan Linz wrote:
> - dts: rename 'ide-disk' to 'disk-activity'
> - platform: rename 'ide-disk' to 'disk-activity'
> - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
> arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +-
> arch/arm/boot/dts/kirkwood-topkick.dts | 2 +-
> arch/arm/configs/collie_defconfig | 2 +-
> arch/arm/configs/ixp4xx_defconfig | 2 +-
> arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
> arch/arm/mach-omap1/board-osk.c | 2 +-
> arch/arm/mach-pxa/spitz.c | 2 +-
> 8 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 81d6c30..c4d04c5 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -86,7 +86,7 @@
> led@3 {
> label = "beagle-x15:usr3";
> gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> default-state = "off";
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> index 1f2ca60..2c661ad 100644
> --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
> +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> @@ -26,7 +26,7 @@
> blue-sata {
> label = "ns2:blue:sata";
> gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
> index f5c8c0d..1e9a721 100644
> --- a/arch/arm/boot/dts/kirkwood-topkick.dts
> +++ b/arch/arm/boot/dts/kirkwood-topkick.dts
> @@ -129,7 +129,7 @@
> disk {
> label = "topkick:yellow:disk";
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> system2 {
> label = "topkick:red:system";
> diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
> index 6c56ad0..52dbad5 100644
> --- a/arch/arm/configs/collie_defconfig
> +++ b/arch/arm/configs/collie_defconfig
> @@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
> CONFIG_LEDS_LOCOMO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> # CONFIG_DNOTIFY is not set
> CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
> diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
> index 24636cf..cf4918a 100644
> --- a/arch/arm/configs/ixp4xx_defconfig
> +++ b/arch/arm/configs/ixp4xx_defconfig
> @@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
> CONFIG_LEDS_GPIO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_ISL1208=y
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 68cc099..ab47b8e 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
> { .name = "DS2", .active_low = 1,
> .default_trigger = "mmc0", },
> { .name = "DS1", .active_low = 1,
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> };
>
> static const struct gpio_led_platform_data evm_led_data = {
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 209aecb..4dfb995 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
> * Also, D9 requires non-battery power.
> */
> { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
> { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
> .default_trigger = "heartbeat", },
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index bd7cd8b..1080580 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
> },
> {
> .name = "spitz:green:hddactivity",
> - .default_trigger = "ide-disk",
> + .default_trigger = "disk-activity",
> .gpio = SPITZ_GPIO_LED_GREEN,
> },
> };
>
next prev parent reply other threads:[~2016-06-13 7:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20160610060021.12382-1-linz@li-pro.net>
2016-06-10 5:59 ` [PATCH v4 4/7] arm: use the new LED disk activity trigger Stephan Linz
2016-06-13 7:42 ` Jacek Anaszewski [this message]
2016-06-13 7:49 ` Tony Lindgren
2016-06-13 8:12 ` Sekhar Nori
2016-06-16 7:16 ` Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575E63D4.6030507@samsung.com \
--to=j.anaszewski@samsung.com \
--cc=andrew@lunn.ch \
--cc=bcousson@baylibre.com \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregory.clement@free-electrons.com \
--cc=haojian.zhuang@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=khilman@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linz@li-pro.net \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).