From: Felipe Balbi <me@felipebalbi.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>, linux-omap@vger.kernel.org
Subject: Re: [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached
Date: Fri, 16 May 2008 13:33:16 -0500 [thread overview]
Message-ID: <6a33dfd999477caafba5330f53cb8716@felipebalbi.com> (raw)
In-Reply-To: <20080516173843.GK23002@atomide.com>
On Fri, 16 May 2008 10:38:43 -0700, Tony Lindgren <tony@atomide.com> wrote:
> * Felipe Balbi <felipe.balbi@nokia.com> [080513 05:33]:
>> From: ext Felipe Balbi <felipe.balbi@nokia.com>
>>
>> This is mostly cosmetic but can help us in the future
>> making musb driver not insertion-based.
>>
>> I mean, whenever we attach micro-/mini-A connector to
>> musb-based devices, we instantaneously turn vbus on where
>> we should wait until we need to use the bus.
>
> This would break standard host behavious of basic USB devices that
> don't support SRP?
Hmm... the way it is today yeah, but I can keep the behaviour
that we try to turn vbus on whenever we attach micro/mini-a. But
I was thinking on letting a file manager (or any other application
that would use usb) to turn vbus on.
If it's a mass storage device, you could let file manager write
to session sysfs entry (which I'm changing to make it work on
both roles).
>
> Tony
>
>> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
>> ---
>> drivers/usb/musb/tusb6010.c | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
>> index 1f3643b..9f92cef 100644
>> --- a/drivers/usb/musb/tusb6010.c
>> +++ b/drivers/usb/musb/tusb6010.c
>> @@ -673,6 +673,8 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void
> __iomem *tbase)
>> default_a = is_host_enabled(musb);
>> DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
>> musb->xceiv.default_a = default_a;
>> + musb->xceiv.state = default_a ? OTG_STATE_A_IDLE
>> + : OTG_STATE_B_IDLE;
>> tusb_source_power(musb, default_a);
>>
>> /* Don't allow idling immediately */
>> --
>> 1.5.5.1.125.gc697a
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Felipe Balbi
http://felipebalbi.com
me@felipebalbi.com
next prev parent reply other threads:[~2008-05-16 18:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 12:29 [RFC PATCH 0/5] musb changes Felipe Balbi
2008-05-13 12:29 ` [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached Felipe Balbi
2008-05-13 12:29 ` [RFC PATCH 2/5] USB: MUSB: Change srp sysfs entry to session Felipe Balbi
2008-05-13 12:29 ` [RFC PATCH 3/5] USB: MUSB: Do not turn vbus on immediately Felipe Balbi
2008-05-13 12:29 ` [RFC PATCH 4/5] USB: MUSB: Always allow musb to idle Felipe Balbi
2008-05-13 12:29 ` [RFC PATCH 5/5] USB: MUSB: We already know the default timeout Felipe Balbi
2008-05-16 17:39 ` [RFC PATCH 3/5] USB: MUSB: Do not turn vbus on immediately Tony Lindgren
2008-05-16 17:38 ` [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached Tony Lindgren
2008-05-16 18:33 ` Felipe Balbi [this message]
2008-05-16 18:40 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a33dfd999477caafba5330f53cb8716@felipebalbi.com \
--to=me@felipebalbi.com \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox