linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Cory Maccarrone <darkstar6262@gmail.com>
To: Ben Dooks <ben@fluff.org>
Cc: linux-mmc@vger.kernel.org, akpm@linux-foundation.org,
	Ladislav Michl <ladis@linux-mips.org>,
	linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
	Marek Belisko <marek.belisko@open-nandra.com>
Subject: Re: [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers
Date: Sun, 7 Mar 2010 16:16:06 -0800	[thread overview]
Message-ID: <6cb013311003071616k7b975e93oc9af9a6a3f0f9c83@mail.gmail.com> (raw)
In-Reply-To: <20100307225901.GU10014@trinity.fluff.org>

On Sun, Mar 7, 2010 at 2:59 PM, Ben Dooks <ben@fluff.org> wrote:
> On Sun, Mar 07, 2010 at 09:47:58AM -0800, Cory Maccarrone wrote:
>> From: Marek Belisko <marek.belisko@open-nandra.com>
>>
>> The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
>> a modification of the register addresses in the mmc-omap driver.  To resolve
>> this, a bit shift is performed on base register addresses, either by 1 or 2
>> bits depending on the CPU in use.  This yields the correct registers for
>> each CPU.
>
> merged the previous one into my tree earlier today.
>
>> Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
>> Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
>> Signed-off-by: Tony Lindgren <tony@atomide.com>
>> ---
>>  drivers/mmc/host/omap.c |   62 +++++++++++++++++++++++++----------------------
>>  1 files changed, 33 insertions(+), 29 deletions(-)
>>
>> This is a resubmit of a patch I sent in several months ago.  Tony Lindgren merged
>> this into linux-omap's master and testing branches but has stated that he will not
>> merge it further as linux-mmc needs to approve this.  There hasn't been any comments
>> raised on either of the linux-omap or linux-mmc mailing lists about problems.  Due to
>> the unique nature of the omap7xx platform, this patch is required for MMC card access.
>> Is there any chance this can be included into the next -rc cycle, as it is a fix for
>> devices that have 16-bit registers?
>>
>> diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
>> index c6d7e8e..53362c4 100644
>> --- a/drivers/mmc/host/omap.c
>> +++ b/drivers/mmc/host/omap.c
>> @@ -38,30 +38,30 @@
>>  #include <plat/fpga.h>
>>
>>  #define      OMAP_MMC_REG_CMD        0x00
>> -#define      OMAP_MMC_REG_ARGL       0x04
>> -#define      OMAP_MMC_REG_ARGH       0x08
>> -#define      OMAP_MMC_REG_CON        0x0c
>> -#define      OMAP_MMC_REG_STAT       0x10
>> -#define      OMAP_MMC_REG_IE         0x14
>> -#define      OMAP_MMC_REG_CTO        0x18
>> -#define      OMAP_MMC_REG_DTO        0x1c
>> -#define      OMAP_MMC_REG_DATA       0x20
>> -#define      OMAP_MMC_REG_BLEN       0x24
>> -#define      OMAP_MMC_REG_NBLK       0x28
>> -#define      OMAP_MMC_REG_BUF        0x2c
>> -#define OMAP_MMC_REG_SDIO    0x34
>> -#define      OMAP_MMC_REG_REV        0x3c
>> -#define      OMAP_MMC_REG_RSP0       0x40
>> -#define      OMAP_MMC_REG_RSP1       0x44
>> -#define      OMAP_MMC_REG_RSP2       0x48
>> -#define      OMAP_MMC_REG_RSP3       0x4c
>> -#define      OMAP_MMC_REG_RSP4       0x50
>> -#define      OMAP_MMC_REG_RSP5       0x54
>> -#define      OMAP_MMC_REG_RSP6       0x58
>> -#define      OMAP_MMC_REG_RSP7       0x5c
>> -#define      OMAP_MMC_REG_IOSR       0x60
>> -#define      OMAP_MMC_REG_SYSC       0x64
>> -#define      OMAP_MMC_REG_SYSS       0x68
>> +#define      OMAP_MMC_REG_ARGL       0x01
>> +#define      OMAP_MMC_REG_ARGH       0x02
>> +#define      OMAP_MMC_REG_CON        0x03
>> +#define      OMAP_MMC_REG_STAT       0x04
>> +#define      OMAP_MMC_REG_IE         0x05
>> +#define      OMAP_MMC_REG_CTO        0x06
>> +#define      OMAP_MMC_REG_DTO        0x07
>> +#define      OMAP_MMC_REG_DATA       0x08
>> +#define      OMAP_MMC_REG_BLEN       0x09
>> +#define      OMAP_MMC_REG_NBLK       0x0a
>> +#define      OMAP_MMC_REG_BUF        0x0b
>> +#define      OMAP_MMC_REG_SDIO       0x0d
>> +#define      OMAP_MMC_REG_REV        0x0f
>> +#define      OMAP_MMC_REG_RSP0       0x10
>> +#define      OMAP_MMC_REG_RSP1       0x11
>> +#define      OMAP_MMC_REG_RSP2       0x12
>> +#define      OMAP_MMC_REG_RSP3       0x13
>> +#define      OMAP_MMC_REG_RSP4       0x14
>> +#define      OMAP_MMC_REG_RSP5       0x15
>> +#define      OMAP_MMC_REG_RSP6       0x16
>> +#define      OMAP_MMC_REG_RSP7       0x17
>> +#define      OMAP_MMC_REG_IOSR       0x18
>> +#define      OMAP_MMC_REG_SYSC       0x19
>> +#define      OMAP_MMC_REG_SYSS       0x1a
>>
>>  #define      OMAP_MMC_STAT_CARD_ERR          (1 << 14)
>>  #define      OMAP_MMC_STAT_CARD_IRQ          (1 << 13)
>> @@ -77,8 +77,9 @@
>>  #define      OMAP_MMC_STAT_CARD_BUSY         (1 <<  2)
>>  #define      OMAP_MMC_STAT_END_OF_CMD        (1 <<  0)
>>
>> -#define OMAP_MMC_READ(host, reg)     __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
>> -#define OMAP_MMC_WRITE(host, reg, val)       __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
>> +#define OMAP_MMC_REG(host, reg)              (OMAP_MMC_REG_##reg << (host)->reg_shift)
>> +#define OMAP_MMC_READ(host, reg)     __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
>> +#define OMAP_MMC_WRITE(host, reg, val)       __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
>>
>>  /*
>>   * Command types
>> @@ -132,6 +133,7 @@ struct mmc_omap_host {
>>       int                     irq;
>>       unsigned char           bus_mode;
>>       unsigned char           hw_bus_mode;
>> +     unsigned int            reg_shift;
>>
>>       struct work_struct      cmd_abort_work;
>>       unsigned                abort:1;
>> @@ -679,9 +681,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
>>       host->data->bytes_xfered += n;
>>
>>       if (write) {
>> -             __raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
>> +             __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
>>       } else {
>> -             __raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
>> +             __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
>>       }
>>  }
>>
>> @@ -899,7 +901,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
>>       int dst_port = 0;
>>       int sync_dev = 0;
>>
>> -     data_addr = host->phys_base + OMAP_MMC_REG_DATA;
>> +     data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
>>       frame = data->blksz;
>>       count = sg_dma_len(sg);
>>
>> @@ -1492,6 +1494,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
>>               }
>>       }
>>
>> +     host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
>> +
>>       return 0;
>>
>>  err_plat_cleanup:
>> --
>> 1.6.3.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> --
> Ben
>
> Q:      What's a light-year?
> A:      One-third less calories than a regular year.
>
>

Which branch?  I can find the I2C patch, but not this mmc patch.

Thanks
- Cory
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2010-03-08  0:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-07 17:47 [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers Cory Maccarrone
2010-03-07 22:59 ` Ben Dooks
2010-03-08  0:16   ` Cory Maccarrone [this message]
2010-03-08 10:04   ` Ben Dooks
2010-05-13 19:29 ` Tony Lindgren
2010-05-13 19:41   ` Andrew Morton
2010-05-13 19:49     ` Tony Lindgren
  -- strict thread matches above, loose matches on Subject: below --
2009-11-15  3:24 [PATCH] [mmc-omap] " Cory Maccarrone
2009-11-18 18:41 ` Ladislav Michl
2009-11-18 21:09   ` Cory Maccarrone
2009-11-18 23:35     ` Ladislav Michl
2009-10-03 21:57 Cory Maccarrone

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6cb013311003071616k7b975e93oc9af9a6a3f0f9c83@mail.gmail.com \
    --to=darkstar6262@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=ben@fluff.org \
    --cc=ladis@linux-mips.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=marek.belisko@open-nandra.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).