From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: Re: [PATCH v4] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches Date: Mon, 2 Jan 2017 16:18:16 +0200 Message-ID: <706677a0-c140-b777-a44f-678ca087cac3@ti.com> References: <1482551370-31493-1-git-send-email-matt@ranostay.consulting> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1482551370-31493-1-git-send-email-matt@ranostay.consulting> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Matt Ranostay , linux-omap@vger.kernel.org, alsa-devel@alsa-project.org Cc: Tony Lindgren List-Id: linux-omap@vger.kernel.org Matt, On 12/24/2016 05:49 AM, Matt Ranostay wrote: > We can get audio errors if hitting deeper idle states on omaps: > = > [alsa.c:230] error: Fatal problem with alsa output, error -5. > [audio.c:614] error: Error in writing audio (Input/output error?)! > = > This seems to happen with off mode idle enabled as power for the > whole SoC may get cut off between filling the McBSP fifo using DMA. > While active DMA blocks deeper idle states in hardware, McBSP > activity does not seem to do so. > = > Basing the QoS latency calculation on the FIFO size, threshold, > sample rate, and channels. > = > Based on the original patch by Tony Lindgren > Link: https://patchwork.kernel.org/patch/9305867/ I think it would be much better if... = > Cc: Tony Lindgren > Cc: Peter Ujfalusi > Signed-off-by: Matt Ranostay > --- > = > Changes from v1: > * add calculations for latency per number of FIFO locations > = > Changes from v2: > * add missing mcbsp.h header change > = > Changes from v3: > * base the latency calculations on threshold, buffer size, sample > rate, and channels > = > sound/soc/omap/mcbsp.c | 19 +++++++++++++++++++ > sound/soc/omap/mcbsp.h | 3 +++ > sound/soc/omap/omap-mcbsp.c | 21 ++++++++++++++++++++- > 3 files changed, 42 insertions(+), 1 deletion(-) > = > diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c > index 06fec5699cc8..8f792e714894 100644 > --- a/sound/soc/omap/mcbsp.c > +++ b/sound/soc/omap/mcbsp.c > @@ -25,6 +25,7 @@ > #include > #include > #include > +#include > = > #include > @@ -640,9 +641,19 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp) > */ > void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int tx, int rx) > { > + struct pm_qos_request *pm_qos_req =3D &mcbsp->pm_qos_req; > int enable_srg =3D 0; > u16 w; > = > + /* Prevent omap hardware from hitting off between fifo fills */ > + if (mcbsp->latency) { > + if (pm_qos_request_active(pm_qos_req)) > + pm_qos_update_request(pm_qos_req, mcbsp->latency); > + else > + pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, > + mcbsp->latency); > + } int stream1 =3D tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; int stream2 =3D tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; unsigned int latency; if (!mcbsp->latency[stream2] || mcbsp->latency[stream1] < mcbsp->latency[stream2]) latency =3D mcbsp->latency[stream1]; else latency =3D mcbsp->latency[stream2]; if (latency) { if (pm_qos_request_active(pm_qos_req)) pm_qos_update_request(pm_qos_req, latency); else pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency); } > + > if (mcbsp->st_data) > omap_st_start(mcbsp); > = > @@ -731,6 +742,11 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int t= x, int rx) > = > if (mcbsp->st_data) > omap_st_stop(mcbsp); > + > + if (mcbsp->active =3D=3D 1 && pm_qos_request_active(&mcbsp->pm_qos_req)= ) { > + pm_qos_remove_request(&mcbsp->pm_qos_req); > + mcbsp->latency =3D 0; > + } if (pm_qos_request_active(&mcbsp->pm_qos_req)) { int stream1 =3D tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; int stream2 =3D tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; mcbsp->latency[stream1] =3D 0; if (mcbsp->latency[stream2]) pm_qos_update_request(pm_qos_req, mcbsp->latency[stream2]); else pm_qos_remove_request(&mcbsp->pm_qos_req); } So we fall back to the qos needed for the remaining stream. > } > = > int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) > @@ -1098,6 +1114,9 @@ int omap_mcbsp_init(struct platform_device *pdev) > = > void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp) > { > + if (pm_qos_request_active(&mcbsp->pm_qos_req)) > + pm_qos_remove_request(&mcbsp->pm_qos_req); > + > if (mcbsp->pdata->buffer_size) > sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); > = > diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h > index 61e93b1c185d..d312e72f7979 100644 > --- a/sound/soc/omap/mcbsp.h > +++ b/sound/soc/omap/mcbsp.h > @@ -323,8 +323,11 @@ struct omap_mcbsp { > = > unsigned int fmt; > unsigned int in_freq; > + unsigned int latency; unsigned int latency[2]; > int clk_div; > int wlen; > + > + struct pm_qos_request pm_qos_req; > }; > = > void omap_mcbsp_config(struct omap_mcbsp *mcbsp, > diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c > index d018e966e533..ddaec37fb4c3 100644 > --- a/sound/soc/omap/omap-mcbsp.c > +++ b/sound/soc/omap/omap-mcbsp.c > @@ -226,6 +226,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_su= bstream *substream, > int wlen, channels, wpf; > int pkt_size =3D 0; > unsigned int format, div, framesize, master; > + unsigned int buffer_size =3D mcbsp->pdata->buffer_size; > = > dma_data =3D snd_soc_dai_get_dma_data(cpu_dai, substream); > channels =3D params_channels(params); > @@ -240,7 +241,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_su= bstream *substream, > default: > return -EINVAL; > } > - if (mcbsp->pdata->buffer_size) { > + if (buffer_size) { > + int latency; > + > if (mcbsp->dma_op_mode =3D=3D MCBSP_DMA_MODE_THRESHOLD) { > int period_words, max_thrsh; > int divider =3D 0; > @@ -271,6 +274,22 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_s= ubstream *substream, > /* Use packet mode for non mono streams */ > pkt_size =3D channels; > } > + > + latency =3D ((((buffer_size - pkt_size) / channels) * 1000) > + / (params->rate_num / params->rate_den)); > + > + /* > + * Use the lowest QoS latency value for active streams, but > + * this has the disadvantage of using lower than needed latency > + * if an stream with lower QoS ends before one with a higher > + * one. Latency setting only gets reset when all streams > + * complete. > + */ > + if (latency <=3D mcbsp->latency) > + mcbsp->latency =3D latency; > + else > + mcbsp->latency =3D 0; mcbsp->latency[substream->stream] =3D latency; > + > omap_mcbsp_set_threshold(substream, pkt_size); > } > = > = What do you think? -- = P=E9ter